From: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
To: linux-wireless@vger.kernel.org
Subject: 3.4-rc5: Oops in run_timer_softirq()
Date: Mon, 07 May 2012 16:46:25 +0200 [thread overview]
Message-ID: <4FA7E041.1070108@fold.natur.cuni.cz> (raw)
Hi,
I have enabled my wifi in the Dell Vostro 3550 laptop by the hardware button combination
Fn+F2 and disabled it back again after few seconds. The following crash happened, and is
quite reproducible. Is that to be fixed by the patch in
"Re: Suspicious RCU usage in mac80211" thread from this email list?
[ 385.231175] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 385.231226] IP: [< (null)>] (null)
[ 385.231245] PGD 0
[ 385.231257] Oops: 0010 [#1] SMP
[ 385.231273] CPU 3
[ 385.231283] Modules linked in: iwlwifi i2c_i801 usb_storage
[ 385.231308]
[ 385.231317] Pid: 0, comm: swapper/3 Not tainted 3.4.0-rc5-default #5 Dell Inc. Vostro 3550/0JGC48
[ 385.231350] RIP: 0010:[<0000000000000000>] [< (null)>] (null)
[ 385.231383] RSP: 0018:ffff88041fb83e78 EFLAGS: 00010286
[ 385.231402] RAX: ffff88041fb83eb0 RBX: 0000000000000100 RCX: 0000000000000838
[ 385.231426] RDX: ffff88041fb83eb0 RSI: dead000000200200 RDI: 0000000000000000
[ 385.231449] RBP: ffff88041fb83ef0 R08: ffff88041fb83eb8 R09: 0000000000000001
[ 385.231480] R10: 0000000000000400 R11: ffffffff816074a5 R12: ffff88040f3b8000
[ 385.231503] R13: ffff88040f3c1fd8 R14: ffff88041fb83eb0 R15: 0000000000000000
[ 385.231526] FS: 0000000000000000(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000
[ 385.231552] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 385.231570] CR2: 0000000000000000 CR3: 0000000001913000 CR4: 00000000000407e0
[ 385.231592] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 385.231614] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 385.231638] Process swapper/3 (pid: 0, threadinfo ffff88040f3c0000, task ffff88040f3bd350)
[ 385.231663] Stack:
[ 385.231673] ffffffff81083f91 ffff88040f3c1fd8 ffff88040f3b9c20 ffff88040f3b9820
[ 385.231702] ffff88040f3b9420 ffff88040f3b9020 0000000000000000 ffff88041fb83eb0
[ 385.231730] ffff88041fb83eb0 ffffffff81043e21 ffffffff8190c088 ffff88040f3c1fd8
[ 385.231759] Call Trace:
[ 385.231770] <IRQ>
[ 385.231784] [<ffffffff81083f91>] ? run_timer_softirq+0x191/0x223
[ 385.231806] [<ffffffff81043e21>] ? lapic_next_event+0x10/0x14
[ 385.231827] [<ffffffff8107fbcc>] __do_softirq+0x83/0x10d
[ 385.231846] [<ffffffff810ae18f>] ? tick_program_event+0x1f/0x21
[ 385.231869] [<ffffffff815e2a8c>] call_softirq+0x1c/0x30
[ 385.231889] [<ffffffff8102e042>] do_softirq+0x33/0x69
[ 385.231907] [<ffffffff8107fe05>] irq_exit+0x3f/0x9a
[ 385.231926] [<ffffffff8104417c>] smp_apic_timer_interrupt+0x77/0x85
[ 385.231948] [<ffffffff815e2307>] apic_timer_interrupt+0x67/0x70
[ 385.231967] <EOI>
[ 385.231979] [<ffffffff8109a149>] ? wake_up_process+0x10/0x12
[ 385.231999] [<ffffffff810aebce>] ? tick_nohz_idle_exit+0x135/0x13c
[ 385.232020] [<ffffffff81033fcd>] cpu_idle+0x78/0x7f
[ 385.232039] [<ffffffff815daf6b>] start_secondary+0x18f/0x193
[ 385.232057] Code: Bad RIP value.
[ 385.232075] RIP [< (null)>] (null)
[ 385.232093] RSP <ffff88041fb83e78>
[ 385.232107] CR2: 0000000000000000
[ 385.232309] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)
[ 385.593328] ---[ end trace e3eed09b44fc9be3 ]---
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 53
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee003f8 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 4c-80-93-ff-ff-15-e6-c7
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00: 86 80 8a 00 06 00 10 00 34 00 80 02 10 00 00 00
10: 04 00 e0 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 25 53
30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 01 d0 23 c8 00 00 00 0d
d0: 05 e0 81 00 f8 03 e0 fe 00 00 00 00 00 00 00 00
e0: 10 00 01 00 c0 8e 00 10 00 08 19 00 11 ec 06 00
f0: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
Thanks,
Martin
next reply other threads:[~2012-05-07 15:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 14:46 Martin Mokrejs [this message]
2012-05-07 19:26 ` 3.4-rc5: Oops in run_timer_softirq() Martin Mokrejs
2012-05-07 19:45 ` Martin Mokrejs
2012-05-07 19:53 ` Sedat Dilek
2012-05-07 20:52 ` Martin Mokrejs
2012-05-14 19:14 ` Martin Mokrejs
2012-05-14 20:09 ` Sedat Dilek
[not found] <4FA7DEC8.5040506@fold.natur.cuni.cz>
2012-05-07 16:33 ` Bjorn Helgaas
2012-05-07 16:51 ` Martin Mokrejs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FA7E041.1070108@fold.natur.cuni.cz \
--to=mmokrejs@fold.natur.cuni.cz \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).