linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmytro Milinevskyy <milinevskyy@gmail.com>
To: ath5k-devel@lists.ath5k.org
Cc: Jiri Slaby <jirislaby@gmail.com>,
	Nick Kossifidis <mickflemm@gmail.com>,
	"Luis R. Rodriguez" <lrodriguez@atheros.com>,
	Bob Copeland <me@bobcopeland.com>,
	"John W. Linville" <linville@tuxdriver.com>,
	GeunSik Lim <geunsik.lim@samsung.com>,
	Greg Kroah-Hartman <gregkh@suse.de>,
	Lukas Turek <8an@praha12.net>, Mark Hindley <mark@hindley.org.uk>,
	Jiri Kosina <jkosina@suse.cz>, Kalle Valo <kalle.valo@iki.fi>,
	Keng-Yu Lin <keng-yu.lin@canonical.com>,
	Luca Verdesca <magooz@salug.it>,
	Shahar Or <shahar@shahar-or.co.il>,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] [ath5k][leds] Ability to disable leds support. If leds support enabled do not force mac802.11 leds layer selection.
Date: Wed, 09 Jun 2010 10:31:01 +0300	[thread overview]
Message-ID: <4c0f4326.0a41df0a.7bde.ffffeef2@mx.google.com> (raw)

Hi!

Here is the patch to disable ath5k leds support on build stage.
However if the leds support was enabled do not force selection of 802.11 leds layer.
Depency on LEDS_CLASS is kept.

Suggestion given by Pavel Roskin and Bob Copeland applied.

Changes from the previos version of the patch:
 - Use bool directive in Kconfig for switching LEDs support
 - Move ath5k_hw_set_ledstate into led.c and change its semantic to align with other leds routines

Regards,

--Dima

Signed-off-by: Dmytro Milinevskyy <milinevskyy@gmail.com>
---
 drivers/net/wireless/ath/ath5k/Kconfig  |   12 +++++--
 drivers/net/wireless/ath/ath5k/Makefile |    2 +-
 drivers/net/wireless/ath/ath5k/ath5k.h  |   21 +++++++++++-
 drivers/net/wireless/ath/ath5k/attach.c |    2 +-
 drivers/net/wireless/ath/ath5k/base.c   |    6 ++--
 drivers/net/wireless/ath/ath5k/base.h   |   11 ++++--
 drivers/net/wireless/ath/ath5k/gpio.c   |   52 ------------------------------
 drivers/net/wireless/ath/ath5k/led.c    |   53 +++++++++++++++++++++++++++++++
 8 files changed, 94 insertions(+), 65 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index eb83b7b..6b2a682 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,9 +1,6 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
 	depends on PCI && MAC80211
-	select MAC80211_LEDS
-	select LEDS_CLASS
-	select NEW_LEDS
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
@@ -18,6 +15,15 @@ config ATH5K
 	  If you choose to build a module, it'll be called ath5k. Say M if
 	  unsure.
 
+
+config ATH5K_LEDS
+	bool "Atheros 5xxx wireless cards LEDs support"
+	depends on ATH5K
+	select NEW_LEDS
+	select LEDS_CLASS
+	---help---
+	  Atheros 5xxx LED support.
+
 config ATH5K_DEBUG
 	bool "Atheros 5xxx debugging"
 	depends on ATH5K
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
index cc09595..6d552dd 100644
--- a/drivers/net/wireless/ath/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -10,8 +10,8 @@ ath5k-y				+= phy.o
 ath5k-y				+= reset.o
 ath5k-y				+= attach.o
 ath5k-y				+= base.o
-ath5k-y				+= led.o
 ath5k-y				+= rfkill.o
 ath5k-y				+= ani.o
 ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
+ath5k-$(CONFIG_ATH5K_LEDS) += led.o
 obj-$(CONFIG_ATH5K)		+= ath5k.o
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 2785946..202d143 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1148,11 +1148,31 @@ struct ath5k_hw {
 int ath5k_hw_attach(struct ath5k_softc *sc);
 void ath5k_hw_detach(struct ath5k_hw *ah);
 
+#ifdef CONFIG_ATH5K_LEDS
 /* LED functions */
+void ath5k_hw_set_ledstate(struct ath5k_softc *sc, unsigned int state);
 int ath5k_init_leds(struct ath5k_softc *sc);
 void ath5k_led_enable(struct ath5k_softc *sc);
 void ath5k_led_off(struct ath5k_softc *sc);
 void ath5k_unregister_leds(struct ath5k_softc *sc);
+#else
+static inline void ath5k_hw_set_ledstate(struct ath5k_softc *sc, unsigned int state)
+{
+}
+static inline int ath5k_init_leds(struct ath5k_softc *sc)
+{
+	return 0;
+}
+static inline void ath5k_led_enable(struct ath5k_softc *sc)
+{
+}
+static inline void ath5k_led_off(struct ath5k_softc *sc)
+{
+}
+static inline void ath5k_unregister_leds(struct ath5k_softc *sc)
+{
+}
+#endif
 
 /* Reset Functions */
 int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
@@ -1233,7 +1253,6 @@ int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
 int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
 
 /* GPIO Functions */
-void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
 int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
 int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
 u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index e0c244b..7930a39 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -336,7 +336,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 	ath5k_hw_init_nfcal_hist(ah);
 
 	/* turn on HW LEDs */
-	ath5k_hw_set_ledstate(ah, AR5K_LED_INIT);
+	ath5k_hw_set_ledstate(sc, AR5K_LED_INIT);
 
 	return 0;
 err_free:
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 2978359..64ea83d 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -3411,7 +3411,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 		sc->assoc = bss_conf->assoc;
 		if (sc->opmode == NL80211_IFTYPE_STATION)
 			set_beacon_filter(hw, sc->assoc);
-		ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
+		ath5k_hw_set_ledstate(sc, sc->assoc ?
 			AR5K_LED_ASSOC : AR5K_LED_INIT);
 		if (bss_conf->assoc) {
 			ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
@@ -3444,13 +3444,13 @@ static void ath5k_sw_scan_start(struct ieee80211_hw *hw)
 {
 	struct ath5k_softc *sc = hw->priv;
 	if (!sc->assoc)
-		ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
+		ath5k_hw_set_ledstate(sc, AR5K_LED_SCAN);
 }
 
 static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
 {
 	struct ath5k_softc *sc = hw->priv;
-	ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
+	ath5k_hw_set_ledstate(sc, sc->assoc ?
 		AR5K_LED_ASSOC : AR5K_LED_INIT);
 }
 
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 56221bc..8d289a3 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -186,9 +186,6 @@ struct ath5k_softc {
 
 	u8			bssidmask[ETH_ALEN];
 
-	unsigned int		led_pin,	/* GPIO pin for driving LED */
-				led_on;		/* pin setting for LED on */
-
 	struct tasklet_struct	restq;		/* reset tasklet */
 
 	unsigned int		rxbufsize;	/* rx size based on mtu */
@@ -196,7 +193,6 @@ struct ath5k_softc {
 	spinlock_t		rxbuflock;
 	u32			*rxlink;	/* link ptr in last RX desc */
 	struct tasklet_struct	rxtq;		/* rx intr tasklet */
-	struct ath5k_led	rx_led;		/* rx led */
 
 	struct list_head	txbuf;		/* transmit buffer */
 	spinlock_t		txbuflock;
@@ -204,7 +200,14 @@ struct ath5k_softc {
 	struct ath5k_txq	txqs[AR5K_NUM_TX_QUEUES];	/* tx queues */
 	struct ath5k_txq	*txq;		/* main tx queue */
 	struct tasklet_struct	txtq;		/* tx intr tasklet */
+
+
+#ifdef CONFIG_ATH5K_LEDS
+	unsigned int		led_pin,	/* GPIO pin for driving LED */
+				led_on;		/* pin setting for LED on */
+	struct ath5k_led	rx_led;		/* rx led */
 	struct ath5k_led	tx_led;		/* tx led */
+#endif
 
 	struct ath5k_rfkill	rf_kill;
 
diff --git a/drivers/net/wireless/ath/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c
index 64a27e7..1e8b145 100644
--- a/drivers/net/wireless/ath/ath5k/gpio.c
+++ b/drivers/net/wireless/ath/ath5k/gpio.c
@@ -26,58 +26,6 @@
 #include "base.h"
 
 /*
- * Set led state
- */
-void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
-{
-	u32 led;
-	/*5210 has different led mode handling*/
-	u32 led_5210;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*Reset led status*/
-	if (ah->ah_version != AR5K_AR5210)
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
-			AR5K_PCICFG_LEDMODE |  AR5K_PCICFG_LED);
-	else
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
-
-	/*
-	 * Some blinking values, define at your wish
-	 */
-	switch (state) {
-	case AR5K_LED_SCAN:
-	case AR5K_LED_AUTH:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
-		led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
-		break;
-
-	case AR5K_LED_INIT:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
-		led_5210 = AR5K_PCICFG_LED_PEND;
-		break;
-
-	case AR5K_LED_ASSOC:
-	case AR5K_LED_RUN:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
-		led_5210 = AR5K_PCICFG_LED_ASSOC;
-		break;
-
-	default:
-		led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
-		led_5210 = AR5K_PCICFG_LED_PEND;
-		break;
-	}
-
-	/*Write new status to the register*/
-	if (ah->ah_version != AR5K_AR5210)
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
-	else
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
-}
-
-/*
  * Set GPIO inputs
  */
 int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 67aa52e..9cff1cf 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -41,6 +41,7 @@
 
 #include <linux/pci.h>
 #include "ath5k.h"
+#include "reg.h"
 #include "base.h"
 
 #define ATH_SDEVICE(subv,subd) \
@@ -86,6 +87,58 @@ static const struct pci_device_id ath5k_led_devices[] = {
 	{ }
 };
 
+/*
+ * Set led state
+ */
+void ath5k_hw_set_ledstate(struct ath5k_softc *sc, unsigned int state)
+{
+	u32 led;
+	/*5210 has different led mode handling*/
+	u32 led_5210;
+
+	ATH5K_TRACE(sc);
+
+	/*Reset led status*/
+	if (sc->ah->ah_version != AR5K_AR5210)
+		AR5K_REG_DISABLE_BITS(sc->ah, AR5K_PCICFG,
+			AR5K_PCICFG_LEDMODE |  AR5K_PCICFG_LED);
+	else
+		AR5K_REG_DISABLE_BITS(sc->ah, AR5K_PCICFG, AR5K_PCICFG_LED);
+
+	/*
+	 * Some blinking values, define at your wish
+	 */
+	switch (state) {
+	case AR5K_LED_SCAN:
+	case AR5K_LED_AUTH:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
+		led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
+		break;
+
+	case AR5K_LED_INIT:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
+		led_5210 = AR5K_PCICFG_LED_PEND;
+		break;
+
+	case AR5K_LED_ASSOC:
+	case AR5K_LED_RUN:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
+		led_5210 = AR5K_PCICFG_LED_ASSOC;
+		break;
+
+	default:
+		led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
+		led_5210 = AR5K_PCICFG_LED_PEND;
+		break;
+	}
+
+	/*Write new status to the register*/
+	if (sc->ah->ah_version != AR5K_AR5210)
+		AR5K_REG_ENABLE_BITS(sc->ah, AR5K_PCICFG, led);
+	else
+		AR5K_REG_ENABLE_BITS(sc->ah, AR5K_PCICFG, led_5210);
+}
+
 void ath5k_led_enable(struct ath5k_softc *sc)
 {
 	if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
-- 
1.7.1


             reply	other threads:[~2010-06-09  7:30 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-09  7:31 Dmytro Milinevskyy [this message]
2010-06-09 13:58 ` [ath5k-devel] [PATCH] [ath5k][leds] Ability to disable leds support. If leds support enabled do not force mac802.11 leds layer selection Bob Copeland
2010-06-09 14:43   ` Dmytro Milinevskyy
2010-06-11 17:07     ` Bob Copeland
2010-06-11 19:52       ` Dmytro Milinevskyy
2010-06-11 20:09     ` Johannes Berg
2010-06-11 20:26       ` Dmytro Milinevskyy
2010-06-11 20:29         ` Johannes Berg
2010-06-12  2:02           ` Dmytro Milinevskyy
  -- strict thread matches above, loose matches on Subject: below --
2010-06-04 13:43 Dmytro Milinevskyy
2010-06-04 16:22 ` Pavel Roskin
2010-06-07  7:39   ` Dmytro Milinevskyy
2010-06-03 19:39 Dmytro Milinevskyy
2010-06-04 14:09 ` John W. Linville
2010-04-07 18:58 Dmytro Milinevskyy
2010-06-01 20:34 ` Bob Copeland
2010-06-01 23:01   ` Dmytro Milinevskyy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4c0f4326.0a41df0a.7bde.ffffeef2@mx.google.com \
    --to=milinevskyy@gmail.com \
    --cc=8an@praha12.net \
    --cc=ath5k-devel@lists.ath5k.org \
    --cc=geunsik.lim@samsung.com \
    --cc=gregkh@suse.de \
    --cc=jirislaby@gmail.com \
    --cc=jkosina@suse.cz \
    --cc=kalle.valo@iki.fi \
    --cc=keng-yu.lin@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=lrodriguez@atheros.com \
    --cc=magooz@salug.it \
    --cc=mark@hindley.org.uk \
    --cc=me@bobcopeland.com \
    --cc=mickflemm@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=shahar@shahar-or.co.il \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).