From: <sean.wang@mediatek.com>
To: <nbd@nbd.name>, <lorenzo.bianconi@redhat.com>
Cc: <sean.wang@mediatek.com>, <Soul.Huang@mediatek.com>,
<YN.Chen@mediatek.com>, <robin.chiu@mediatek.com>,
<ch.yeh@mediatek.com>, <posh.sun@mediatek.com>,
<Eric.Liang@mediatek.com>, <ryder.lee@mediatek.com>,
<linux-wireless@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
Lorenzo Bianconi <lorenzo@kernel.org>
Subject: [PATCH -next v4 12/13] mt76: mt7921: introduce beacon_loss mcu event
Date: Thu, 31 Dec 2020 02:06:23 +0800 [thread overview]
Message-ID: <4d75d071a77b2b72bb15751d2ebeb976c10fb0d5.1609347310.git.objelf@gmail.com> (raw)
In-Reply-To: <cover.1609347310.git.objelf@gmail.com>
From: Sean Wang <sean.wang@mediatek.com>
If device has enabled beacon hw filter rx beacons are not reported to
the host. Introduce beacon_loss mcu event to trigger mac80211 mlme
connection state machine in this configuration.
IEEE80211_VIF_BEACON_FILTER has not set in vif flags since hw beacon
filter is not enabled yet
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
.../net/wireless/mediatek/mt76/mt7921/mcu.c | 35 +++++++++++++++++++
.../net/wireless/mediatek/mt76/mt7921/mcu.h | 6 ++++
2 files changed, 41 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index 11550be87402..003424a82ca2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -543,6 +543,40 @@ mt7921_mcu_scan_event(struct mt7921_dev *dev, struct sk_buff *skb)
MT7921_HW_SCAN_TIMEOUT);
}
+static void
+mt7921_mcu_beacon_loss_iter(void *priv, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
+ struct mt7921_beacon_loss_event *event = priv;
+
+ if (mvif->idx != event->bss_idx)
+ return;
+
+ if (!(vif->driver_flags & IEEE80211_VIF_BEACON_FILTER))
+ return;
+
+ ieee80211_beacon_loss(vif);
+}
+
+static void
+mt7921_mcu_beacon_loss_event(struct mt7921_dev *dev, struct sk_buff *skb)
+{
+ struct mt7921_beacon_loss_event *event;
+ struct mt76_phy *mphy;
+ u8 band_idx = 0; /* DBDC support */
+
+ skb_pull(skb, sizeof(struct mt7921_mcu_rxd));
+ event = (struct mt7921_beacon_loss_event *)skb->data;
+ if (band_idx && dev->mt76.phy2)
+ mphy = dev->mt76.phy2;
+ else
+ mphy = &dev->mt76.phy;
+
+ ieee80211_iterate_active_interfaces_atomic(mphy->hw,
+ IEEE80211_IFACE_ITER_RESUME_ALL,
+ mt7921_mcu_beacon_loss_iter, event);
+}
+
static void
mt7921_mcu_bss_event(struct mt7921_dev *dev, struct sk_buff *skb)
{
@@ -593,6 +627,7 @@ mt7921_mcu_rx_unsolicited_event(struct mt7921_dev *dev, struct sk_buff *skb)
switch (rxd->eid) {
case MCU_EVENT_BSS_BEACON_LOSS:
+ mt7921_mcu_beacon_loss_event(dev, skb);
break;
case MCU_EVENT_SCHED_SCAN_DONE:
case MCU_EVENT_SCAN_DONE:
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.h
index 6894b44ff62d..d6cb062619db 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.h
@@ -783,6 +783,12 @@ struct mt7921_bss_qos_tlv {
u8 pad[3];
} __packed;
+struct mt7921_beacon_loss_event {
+ u8 bss_idx;
+ u8 reason;
+ u8 pad[2];
+} __packed;
+
struct mt7921_mcu_scan_ssid {
__le32 ssid_len;
u8 ssid[IEEE80211_MAX_SSID_LEN];
--
2.25.1
next prev parent reply other threads:[~2020-12-30 18:07 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-30 18:06 [PATCH -next v4 00/13] introduce mt7921e support sean.wang
2020-12-30 18:06 ` [PATCH -next v4 01/13] mt76: mt7921: add module support sean.wang
2021-01-03 12:00 ` Felix Fietkau
2020-12-30 18:06 ` [PATCH -next v4 02/13] mt76: mt7921: add MCU support sean.wang
2020-12-31 8:55 ` Ryder Lee
2020-12-30 18:06 ` [PATCH -next v4 03/13] mt76: mt7921: add MAC support sean.wang
2020-12-31 8:09 ` Ryder Lee
2020-12-31 22:58 ` Ryder Lee
2020-12-30 18:06 ` [PATCH -next v4 04/13] mt76: mt7921: add DMA support sean.wang
2020-12-30 18:06 ` [PATCH -next v4 05/13] mt76: mt7921: add EEPROM support sean.wang
2020-12-30 18:06 ` [PATCH -next v4 06/13] mt76: mt7921: add ieee80211_ops sean.wang
2020-12-30 18:06 ` [PATCH -next v4 07/13] mt76: mt7921: introduce mt7921e support sean.wang
2020-12-30 18:06 ` [PATCH -next v4 08/13] mt76: mt7921: add debugfs support sean.wang
2020-12-30 18:06 ` [PATCH -next v4 09/13] mt76: mt7921: introduce schedule scan support sean.wang
2020-12-30 18:06 ` [PATCH -next v4 10/13] mt76: mt7921: introduce 802.11 PS support in sta mode sean.wang
2020-12-30 18:06 ` [PATCH -next v4 11/13] mt76: mt7921: introduce support for hardware beacon filter sean.wang
2020-12-30 18:06 ` sean.wang [this message]
2020-12-30 18:06 ` [PATCH -next v4 13/13] mt76: mt7921: introduce PM support sean.wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4d75d071a77b2b72bb15751d2ebeb976c10fb0d5.1609347310.git.objelf@gmail.com \
--to=sean.wang@mediatek.com \
--cc=Eric.Liang@mediatek.com \
--cc=Soul.Huang@mediatek.com \
--cc=YN.Chen@mediatek.com \
--cc=ch.yeh@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=lorenzo@kernel.org \
--cc=nbd@nbd.name \
--cc=posh.sun@mediatek.com \
--cc=robin.chiu@mediatek.com \
--cc=ryder.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).