[PATCH v2 0/3] ath6kl: regdomain support

[PATCH v2 0/3] ath6kl: regdomain support

[Kalle Valo]

In v2 I splitted the wmi scan refactoring patch to make it easier to
read the changes. Also I rebased this agains latest ath6kl.git master
branch.

---

Kalle Valo (3):
      ath6kl: move ath6kl_wmi_startscan_cmd()
      ath6kl: refactor wmi scan command
      ath6kl: add support for changing contry code


 drivers/net/wireless/ath/ath6kl/Kconfig    |    9 ++
 drivers/net/wireless/ath/ath6kl/cfg80211.c |   78 ++++++++++++------
 drivers/net/wireless/ath/ath6kl/core.h     |    3 +
 drivers/net/wireless/ath/ath6kl/wmi.c      |  124 ++++++++++++++++++----------
 drivers/net/wireless/ath/ath6kl/wmi.h      |   11 +-
 5 files changed, 151 insertions(+), 74 deletions(-)

[PATCH v2 1/3] ath6kl: move ath6kl_wmi_startscan_cmd()

[Kalle Valo]

To make it easier to refactor the scan commands move
ath6kl_wmi_startscan_cmd() before the beginscan function. No functional
changes.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/wmi.c |   88 +++++++++++++++++----------------
 1 files changed, 44 insertions(+), 44 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 4762fa5..a9d7e00 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1895,22 +1895,22 @@ int ath6kl_wmi_disconnect_cmd(struct wmi *wmi, u8 if_idx)
 	return ret;
 }
 
-int ath6kl_wmi_beginscan_cmd(struct wmi *wmi, u8 if_idx,
+/* ath6kl_wmi_start_scan_cmd is to be deprecated. Use
+ * ath6kl_wmi_begin_scan_cmd instead. The new function supports P2P
+ * mgmt operations using station interface.
+ */
+int ath6kl_wmi_startscan_cmd(struct wmi *wmi, u8 if_idx,
 			     enum wmi_scan_type scan_type,
 			     u32 force_fgscan, u32 is_legacy,
 			     u32 home_dwell_time, u32 force_scan_interval,
-			     s8 num_chan, u16 *ch_list, u32 no_cck, u32 *rates)
+			     s8 num_chan, u16 *ch_list)
 {
-	struct ieee80211_supported_band *sband;
 	struct sk_buff *skb;
-	struct wmi_begin_scan_cmd *sc;
-	s8 size, *supp_rates;
-	int i, band, ret;
-	struct ath6kl *ar = wmi->parent_dev;
-	int num_rates;
-	u32 ratemask;
+	struct wmi_start_scan_cmd *sc;
+	s8 size;
+	int i, ret;
 
-	size = sizeof(struct wmi_begin_scan_cmd);
+	size = sizeof(struct wmi_start_scan_cmd);
 
 	if ((scan_type != WMI_LONG_SCAN) && (scan_type != WMI_SHORT_SCAN))
 		return -EINVAL;
@@ -1925,59 +1925,39 @@ int ath6kl_wmi_beginscan_cmd(struct wmi *wmi, u8 if_idx,
 	if (!skb)
 		return -ENOMEM;
 
-	sc = (struct wmi_begin_scan_cmd *) skb->data;
+	sc = (struct wmi_start_scan_cmd *) skb->data;
 	sc->scan_type = scan_type;
 	sc->force_fg_scan = cpu_to_le32(force_fgscan);
 	sc->is_legacy = cpu_to_le32(is_legacy);
 	sc->home_dwell_time = cpu_to_le32(home_dwell_time);
 	sc->force_scan_intvl = cpu_to_le32(force_scan_interval);
-	sc->no_cck = cpu_to_le32(no_cck);
 	sc->num_ch = num_chan;
 
-	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
-		sband = ar->wiphy->bands[band];
-
-		if (!sband)
-			continue;
-
-		ratemask = rates[band];
-		supp_rates = sc->supp_rates[band].rates;
-		num_rates = 0;
-
-		for (i = 0; i < sband->n_bitrates; i++) {
-			if ((BIT(i) & ratemask) == 0)
-				continue; /* skip rate */
-			supp_rates[num_rates++] =
-			    (u8) (sband->bitrates[i].bitrate / 5);
-		}
-		sc->supp_rates[band].nrates = num_rates;
-	}
-
 	for (i = 0; i < num_chan; i++)
 		sc->ch_list[i] = cpu_to_le16(ch_list[i]);
 
-	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb, WMI_BEGIN_SCAN_CMDID,
+	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb, WMI_START_SCAN_CMDID,
 				  NO_SYNC_WMIFLAG);
 
 	return ret;
 }
 
-/* ath6kl_wmi_start_scan_cmd is to be deprecated. Use
- * ath6kl_wmi_begin_scan_cmd instead. The new function supports P2P
- * mgmt operations using station interface.
- */
-int ath6kl_wmi_startscan_cmd(struct wmi *wmi, u8 if_idx,
+int ath6kl_wmi_beginscan_cmd(struct wmi *wmi, u8 if_idx,
 			     enum wmi_scan_type scan_type,
 			     u32 force_fgscan, u32 is_legacy,
 			     u32 home_dwell_time, u32 force_scan_interval,
-			     s8 num_chan, u16 *ch_list)
+			     s8 num_chan, u16 *ch_list, u32 no_cck, u32 *rates)
 {
+	struct ieee80211_supported_band *sband;
 	struct sk_buff *skb;
-	struct wmi_start_scan_cmd *sc;
-	s8 size;
-	int i, ret;
+	struct wmi_begin_scan_cmd *sc;
+	s8 size, *supp_rates;
+	int i, band, ret;
+	struct ath6kl *ar = wmi->parent_dev;
+	int num_rates;
+	u32 ratemask;
 
-	size = sizeof(struct wmi_start_scan_cmd);
+	size = sizeof(struct wmi_begin_scan_cmd);
 
 	if ((scan_type != WMI_LONG_SCAN) && (scan_type != WMI_SHORT_SCAN))
 		return -EINVAL;
@@ -1992,18 +1972,38 @@ int ath6kl_wmi_startscan_cmd(struct wmi *wmi, u8 if_idx,
 	if (!skb)
 		return -ENOMEM;
 
-	sc = (struct wmi_start_scan_cmd *) skb->data;
+	sc = (struct wmi_begin_scan_cmd *) skb->data;
 	sc->scan_type = scan_type;
 	sc->force_fg_scan = cpu_to_le32(force_fgscan);
 	sc->is_legacy = cpu_to_le32(is_legacy);
 	sc->home_dwell_time = cpu_to_le32(home_dwell_time);
 	sc->force_scan_intvl = cpu_to_le32(force_scan_interval);
+	sc->no_cck = cpu_to_le32(no_cck);
 	sc->num_ch = num_chan;
 
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		sband = ar->wiphy->bands[band];
+
+		if (!sband)
+			continue;
+
+		ratemask = rates[band];
+		supp_rates = sc->supp_rates[band].rates;
+		num_rates = 0;
+
+		for (i = 0; i < sband->n_bitrates; i++) {
+			if ((BIT(i) & ratemask) == 0)
+				continue; /* skip rate */
+			supp_rates[num_rates++] =
+			    (u8) (sband->bitrates[i].bitrate / 5);
+		}
+		sc->supp_rates[band].nrates = num_rates;
+	}
+
 	for (i = 0; i < num_chan; i++)
 		sc->ch_list[i] = cpu_to_le16(ch_list[i]);
 
-	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb, WMI_START_SCAN_CMDID,
+	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb, WMI_BEGIN_SCAN_CMDID,
 				  NO_SYNC_WMIFLAG);
 
 	return ret;

[PATCH v2 2/3] ath6kl: refactor wmi scan command

[Kalle Valo]

ATH6KL_FW_CAPABILITY_STA_P2PDEV_DUPLEX was checked in cfg80211.c which is
a bit awkward when adding more callsites to the scan functions. Refactor
the code to wmi.c so that it's transparent to the callers.

Even though the patch looks scary there are no functional changes. I
just had to move ath6kl_wmi_startscan_cmd() before
ath6kl_wmi_beginscan_cmd() which confuses patch.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c |   31 +++++++---------------------
 drivers/net/wireless/ath/ath6kl/wmi.c      |   25 ++++++++++++++++++-----
 drivers/net/wireless/ath/ath6kl/wmi.h      |    5 -----
 3 files changed, 28 insertions(+), 33 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 4eeb066..0c3e65e 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -1031,30 +1031,15 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy,
 
 	vif->scan_req = request;
 
-	if (test_bit(ATH6KL_FW_CAPABILITY_STA_P2PDEV_DUPLEX,
-		     ar->fw_capabilities)) {
-		/*
-		 * If capable of doing P2P mgmt operations using
-		 * station interface, send additional information like
-		 * supported rates to advertise and xmit rates for
-		 * probe requests
-		 */
-		ret = ath6kl_wmi_beginscan_cmd(ar->wmi, vif->fw_vif_idx,
-						WMI_LONG_SCAN, force_fg_scan,
-						false, 0,
-						ATH6KL_FG_SCAN_INTERVAL,
-						n_channels, channels,
-						request->no_cck,
-						request->rates);
-	} else {
-		ret = ath6kl_wmi_startscan_cmd(ar->wmi, vif->fw_vif_idx,
-						WMI_LONG_SCAN, force_fg_scan,
-						false, 0,
-						ATH6KL_FG_SCAN_INTERVAL,
-						n_channels, channels);
-	}
+	ret = ath6kl_wmi_beginscan_cmd(ar->wmi, vif->fw_vif_idx,
+				       WMI_LONG_SCAN, force_fg_scan,
+				       false, 0,
+				       ATH6KL_FG_SCAN_INTERVAL,
+				       n_channels, channels,
+				       request->no_cck,
+				       request->rates);
 	if (ret) {
-		ath6kl_err("wmi_startscan_cmd failed\n");
+		ath6kl_err("failed to start scan: %d\n", ret);
 		vif->scan_req = NULL;
 	}
 
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index a9d7e00..05cc871 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1899,11 +1899,12 @@ int ath6kl_wmi_disconnect_cmd(struct wmi *wmi, u8 if_idx)
  * ath6kl_wmi_begin_scan_cmd instead. The new function supports P2P
  * mgmt operations using station interface.
  */
-int ath6kl_wmi_startscan_cmd(struct wmi *wmi, u8 if_idx,
-			     enum wmi_scan_type scan_type,
-			     u32 force_fgscan, u32 is_legacy,
-			     u32 home_dwell_time, u32 force_scan_interval,
-			     s8 num_chan, u16 *ch_list)
+static int ath6kl_wmi_startscan_cmd(struct wmi *wmi, u8 if_idx,
+				    enum wmi_scan_type scan_type,
+				    u32 force_fgscan, u32 is_legacy,
+				    u32 home_dwell_time,
+				    u32 force_scan_interval,
+				    s8 num_chan, u16 *ch_list)
 {
 	struct sk_buff *skb;
 	struct wmi_start_scan_cmd *sc;
@@ -1942,6 +1943,11 @@ int ath6kl_wmi_startscan_cmd(struct wmi *wmi, u8 if_idx,
 	return ret;
 }
 
+/*
+ * beginscan supports (compared to old startscan) P2P mgmt operations using
+ * station interface, send additional information like supported rates to
+ * advertise and xmit rates for probe requests
+ */
 int ath6kl_wmi_beginscan_cmd(struct wmi *wmi, u8 if_idx,
 			     enum wmi_scan_type scan_type,
 			     u32 force_fgscan, u32 is_legacy,
@@ -1957,6 +1963,15 @@ int ath6kl_wmi_beginscan_cmd(struct wmi *wmi, u8 if_idx,
 	int num_rates;
 	u32 ratemask;
 
+	if (!test_bit(ATH6KL_FW_CAPABILITY_STA_P2PDEV_DUPLEX,
+		      ar->fw_capabilities)) {
+		return ath6kl_wmi_startscan_cmd(wmi, if_idx,
+						scan_type, force_fgscan,
+						is_legacy, home_dwell_time,
+						force_scan_interval,
+						num_chan, ch_list);
+	}
+
 	size = sizeof(struct wmi_begin_scan_cmd);
 
 	if ((scan_type != WMI_LONG_SCAN) && (scan_type != WMI_SHORT_SCAN))
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 8e8846f..5166a8e 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -2547,11 +2547,6 @@ int ath6kl_wmi_connect_cmd(struct wmi *wmi, u8 if_idx,
 int ath6kl_wmi_reconnect_cmd(struct wmi *wmi, u8 if_idx, u8 *bssid,
 			     u16 channel);
 int ath6kl_wmi_disconnect_cmd(struct wmi *wmi, u8 if_idx);
-int ath6kl_wmi_startscan_cmd(struct wmi *wmi, u8 if_idx,
-			     enum wmi_scan_type scan_type,
-			     u32 force_fgscan, u32 is_legacy,
-			     u32 home_dwell_time, u32 force_scan_interval,
-			     s8 num_chan, u16 *ch_list);
 
 int ath6kl_wmi_beginscan_cmd(struct wmi *wmi, u8 if_idx,
 			     enum wmi_scan_type scan_type,

Re: [PATCH v2 2/3] ath6kl: refactor wmi scan command

[Kalle Valo]

On 07/19/2012 04:00 PM, Kalle Valo wrote:
> ATH6KL_FW_CAPABILITY_STA_P2PDEV_DUPLEX was checked in cfg80211.c which is
> a bit awkward when adding more callsites to the scan functions. Refactor
> the code to wmi.c so that it's transparent to the callers.
> 
> Even though the patch looks scary there are no functional changes. I
> just had to move ath6kl_wmi_startscan_cmd() before
> ath6kl_wmi_beginscan_cmd() which confuses patch.
> 
> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

I removed the second paragraph during commit as it wasn't true anymore
after splitting the patch.

Kalle

[PATCH v2 3/3] ath6kl: add support for changing contry code

[Kalle Valo]

To make it possible to change the country code from user space via nl80211
add handler for reg_notifier. The feature is only enabled when built
time option CONFIG_ATH6KL_REGDOMAIN is enabled, which again depends on
CFG80211_CERTIFICATION_ONUS for certication purposes.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/Kconfig    |    9 +++++
 drivers/net/wireless/ath/ath6kl/cfg80211.c |   47 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath6kl/core.h     |    3 ++
 drivers/net/wireless/ath/ath6kl/wmi.c      |   17 ++++++++++
 drivers/net/wireless/ath/ath6kl/wmi.h      |    6 ++++
 5 files changed, 82 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig
index d755a5e..26c4b72 100644
--- a/drivers/net/wireless/ath/ath6kl/Kconfig
+++ b/drivers/net/wireless/ath/ath6kl/Kconfig
@@ -30,3 +30,12 @@ config ATH6KL_DEBUG
 	depends on ATH6KL
 	---help---
 	  Enables debug support
+
+config ATH6KL_REGDOMAIN
+	bool "Atheros ath6kl regdomain support"
+	depends on ATH6KL
+	depends on CFG80211_CERTIFICATION_ONUS
+	---help---
+	  Enabling this makes it possible to change the regdomain in
+	  the firmware. This can be only enabled if regulatory requirements
+	  are taken into account.
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 0c3e65e..f834223 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3458,6 +3458,49 @@ void ath6kl_cfg80211_stop_all(struct ath6kl *ar)
 		ath6kl_cfg80211_stop(vif);
 }
 
+static int ath6kl_cfg80211_reg_notify(struct wiphy *wiphy,
+				      struct regulatory_request *request)
+{
+	struct ath6kl *ar = wiphy_priv(wiphy);
+	u32 rates[IEEE80211_NUM_BANDS];
+	int ret, i;
+
+	ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
+		   "cfg reg_notify %c%c%s%s initiator %d\n",
+		   request->alpha2[0], request->alpha2[1],
+		   request->intersect ? " intersect" : "",
+		   request->processed ? " processed" : "",
+		   request->initiator);
+
+	ret = ath6kl_wmi_set_regdomain_cmd(ar->wmi, request->alpha2);
+	if (ret) {
+		ath6kl_err("failed to set regdomain: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Firmware will apply the regdomain change only after a scan is
+	 * issued and it will send a WMI_REGDOMAIN_EVENTID when it has been
+	 * changed.
+	 */
+
+	for (i = 0; i < IEEE80211_NUM_BANDS; i++)
+		if (wiphy->bands[i])
+			rates[i] = (1 << wiphy->bands[i]->n_bitrates) - 1;
+
+
+	ret = ath6kl_wmi_beginscan_cmd(ar->wmi, 0, WMI_LONG_SCAN, false,
+				       false, 0, ATH6KL_FG_SCAN_INTERVAL,
+				       0, NULL, false, rates);
+	if (ret) {
+		ath6kl_err("failed to start scan for a regdomain change: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int ath6kl_cfg80211_vif_init(struct ath6kl_vif *vif)
 {
 	vif->aggr_cntxt = aggr_init(vif);
@@ -3590,6 +3633,10 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 					  BIT(NL80211_IFTYPE_P2P_CLIENT);
 	}
 
+	if (config_enabled(CONFIG_ATH6KL_REGDOMAIN) &&
+	    test_bit(ATH6KL_FW_CAPABILITY_REGDOMAIN, ar->fw_capabilities))
+		wiphy->reg_notifier = ath6kl_cfg80211_reg_notify;
+
 	/* max num of ssids that can be probed during scanning */
 	wiphy->max_scan_ssids = MAX_PROBED_SSIDS;
 
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index a754a15..eb86b31 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -124,6 +124,9 @@ enum ath6kl_fw_capability {
 	/* Firmware supports TX error rate notification */
 	ATH6KL_FW_CAPABILITY_TX_ERR_NOTIFY,
 
+	/* supports WMI_SET_REGDOMAIN_CMDID command */
+	ATH6KL_FW_CAPABILITY_REGDOMAIN,
+
 	/* this needs to be last */
 	ATH6KL_FW_CAPABILITY_MAX,
 };
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 05cc871..cf91348 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -3216,6 +3216,23 @@ int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enhance)
 	return ret;
 }
 
+int ath6kl_wmi_set_regdomain_cmd(struct wmi *wmi, const char *alpha2)
+{
+	struct sk_buff *skb;
+	struct wmi_set_regdomain_cmd *cmd;
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_set_regdomain_cmd *) skb->data;
+	memcpy(cmd->iso_name, alpha2, 2);
+
+	return ath6kl_wmi_cmd_send(wmi, 0, skb,
+				   WMI_SET_REGDOMAIN_CMDID,
+				   NO_SYNC_WMIFLAG);
+}
+
 s32 ath6kl_wmi_get_rate(s8 rate_index)
 {
 	if (rate_index == RATE_AUTO)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 5166a8e..1d510ba 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -1042,6 +1042,11 @@ struct wmi_sta_bmiss_enhance_cmd {
 	u8 enable;
 } __packed;
 
+struct wmi_set_regdomain_cmd {
+	u8 length;
+	u8 iso_name[2];
+} __packed;
+
 /* WMI_SET_POWER_MODE_CMDID */
 enum wmi_power_mode {
 	REC_POWER = 0x01,
@@ -2640,6 +2645,7 @@ int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx,
 int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enable);
 int ath6kl_wmi_set_txe_notify(struct wmi *wmi, u8 idx,
 			      u32 rate, u32 pkts, u32 intvl);
+int ath6kl_wmi_set_regdomain_cmd(struct wmi *wmi, const char *alpha2);
 
 /* AP mode uAPSD */
 int ath6kl_wmi_ap_set_apsd(struct wmi *wmi, u8 if_idx, u8 enable);

Re: [PATCH v2 3/3] ath6kl: add support for changing contry code

[Luis R. Rodriguez]

On Thu, Jul 19, 2012 at 6:00 AM, Kalle Valo <kvalo@qca.qualcomm.com> wrote:
> To make it possible to change the country code from user space via nl80211
> add handler for reg_notifier. The feature is only enabled when built
> time option CONFIG_ATH6KL_REGDOMAIN is enabled, which again depends on
> CFG80211_CERTIFICATION_ONUS for certication purposes.
>
> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Ah OK so a followup patch would use ath6kl_wmi_set_regdomain_cmd() ?

  Luis

Re: [PATCH v2 3/3] ath6kl: add support for changing contry code

[Kalle Valo]

On 07/19/2012 10:54 PM, Luis R. Rodriguez wrote:
> On Thu, Jul 19, 2012 at 6:00 AM, Kalle Valo <kvalo@qca.qualcomm.com> wrote:
>> To make it possible to change the country code from user space via nl80211
>> add handler for reg_notifier. The feature is only enabled when built
>> time option CONFIG_ATH6KL_REGDOMAIN is enabled, which again depends on
>> CFG80211_CERTIFICATION_ONUS for certication purposes.
>>
>> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
> 
> Ah OK so a followup patch would use ath6kl_wmi_set_regdomain_cmd() ?

The current code already does that. The followup patch would change
ath6kl so that it follows the cellular BTS hints and advertises the
support for that.

Kalle

Re: [PATCH v2 0/3] ath6kl: regdomain support

[Kalle Valo]

On 07/19/2012 04:00 PM, Kalle Valo wrote:
> In v2 I splitted the wmi scan refactoring patch to make it easier to
> read the changes. Also I rebased this agains latest ath6kl.git master
> branch.

Applied to ath6kl.git.

Kalle