From: Jonathan Bagg <jbagg@lenbrook.com>
To: Ben Gray <ben.r.gray@gmail.com>
Cc: linux-wireless@vger.kernel.org, ath6kl-devel@qualcomm.com
Subject: Re: ath6kl ar6004/ar9374 (hw 1.3) WPA/WPA2 supported ?
Date: Wed, 26 Sep 2012 07:49:34 -0400 [thread overview]
Message-ID: <5062EBCE.70700@lenbrook.com> (raw)
In-Reply-To: <5062E0CB.6040308@gmail.com>
I've had the same experience, I can connect with iw, but not with
wpa_supplicant with wpa. I also couldn't get higher than 65Mbps, MCS7
(other devices on the same router will go faster). I'm probably the
other post you mentioned.
Jon
On 12-09-26 07:02 AM, Ben Gray wrote:
> Hi,
>
> I have a bunch of UB134 USB dongles which have a ath6kl chip with
> H/W version 0x31c8088a, I'm trying to get them to work with the ath6kl
> driver from the compat-wireless-3.6-rc5-1 package. I've applied this
> (https://patchwork.kernel.org/patch/1203191/) patch to the source and
> pulled the hw1.3 firmware from the linux-firmware git.
>
> The driver works as far as it can scan AP's and connect to
> unencrypted networks, however WPA/WPA2 doesn't work when I run
> wpa_supplicant. I realise "WPA doesn't work" is a bit vague, and I can
> post the wpa_supplicant and driver logs if that helps, but I've seen
> another post which says they couldn't get WPA to work either, so I'd
> like to know if this is a known issue with the driver and/or firmware?
> Has anyone had any luck getting WPA/WPA2 working with ath6kl hw1.3 ?
>
> If this is a known issue does anyone know when it might be fixed ?
>
>
> Thanks in advance,
> Ben.
>
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-09-26 11:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-26 11:02 ath6kl ar6004/ar9374 (hw 1.3) WPA/WPA2 supported ? Ben Gray
2012-09-26 11:44 ` Mohammed Shafi
2012-09-26 11:49 ` Jonathan Bagg [this message]
2012-09-26 11:57 ` Jouni Malinen
2012-09-26 12:19 ` Mohammed Shafi
2012-09-26 12:35 ` Ben Gray
2012-09-26 14:02 ` Mohammed Shafi
2012-09-26 15:11 ` Ben Gray
2012-09-26 15:14 ` Mohammed Shafi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5062EBCE.70700@lenbrook.com \
--to=jbagg@lenbrook.com \
--cc=ath6kl-devel@qualcomm.com \
--cc=ben.r.gray@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).