From: Larry Finger <Larry.Finger@lwfinger.net>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH] rtlwifi: use %*ph[C] to dump small buffers
Date: Thu, 27 Sep 2012 10:10:08 -0500 [thread overview]
Message-ID: <50646C50.70703@lwfinger.net> (raw)
In-Reply-To: <1348667852-5957-1-git-send-email-andriy.shevchenko@linux.intel.com>
On 09/26/2012 08:57 AM, Andy Shevchenko wrote:
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/net/wireless/rtlwifi/cam.c | 7 ++-----
> drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 6 ++----
> drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 6 ++----
> 3 files changed, 6 insertions(+), 13 deletions(-)
Andy,
Thanks for this. I have only one suggestion. I try to include all the drivers
affected in the subject line. As this one changes rtl8192ce, and rtl8192cu, I
would like to see "rtlwifi: rtl8192ce: rtl8192cu: use ..." as the subject. Other
than that, ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Larry
>
> diff --git a/drivers/net/wireless/rtlwifi/cam.c b/drivers/net/wireless/rtlwifi/cam.c
> index 5b4b4d4..6ba9f80 100644
> --- a/drivers/net/wireless/rtlwifi/cam.c
> +++ b/drivers/net/wireless/rtlwifi/cam.c
> @@ -52,11 +52,8 @@ static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no,
> u32 target_content = 0;
> u8 entry_i;
>
> - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
> - "key_cont_128:\n %x:%x:%x:%x:%x:%x\n",
> - key_cont_128[0], key_cont_128[1],
> - key_cont_128[2], key_cont_128[3],
> - key_cont_128[4], key_cont_128[5]);
> + RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "key_cont_128: %*ph\n",
> + 6, key_cont_128);
>
> for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
> target_command = entry_i + CAM_CONTENT_COUNT * entry_no;
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
> index 86d73b3..932780d 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
> @@ -1918,10 +1918,8 @@ static void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw,
> (ratr_index << 28);
> rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
> RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
> - "Rate_index:%x, ratr_val:%x, %x:%x:%x:%x:%x\n",
> - ratr_index, ratr_bitmap,
> - rate_mask[0], rate_mask[1], rate_mask[2], rate_mask[3],
> - rate_mask[4]);
> + "Rate_index:%x, ratr_val:%x, %*phC\n",
> + ratr_index, ratr_bitmap, 5, rate_mask);
> rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
>
> if (macid != 0)
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
> index 4bbb711..7554501 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
> @@ -2169,10 +2169,8 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
> ratr_index << 28);
> rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
> RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
> - "Rate_index:%x, ratr_val:%x, %x:%x:%x:%x:%x\n",
> - ratr_index, ratr_bitmap,
> - rate_mask[0], rate_mask[1], rate_mask[2], rate_mask[3],
> - rate_mask[4]);
> + "Rate_index:%x, ratr_val:%x, %*phC\n",
> + ratr_index, ratr_bitmap, 5, rate_mask);
> rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
> }
>
>
prev parent reply other threads:[~2012-09-27 15:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-26 13:57 [PATCH] rtlwifi: use %*ph[C] to dump small buffers Andy Shevchenko
2012-09-26 16:45 ` Joe Perches
2012-09-27 15:16 ` Larry Finger
2012-09-27 22:28 ` Larry Finger
2012-09-28 3:13 ` Joe Perches
2012-09-28 9:04 ` David Laight
2012-09-28 16:41 ` Larry Finger
2012-09-28 17:24 ` Joe Perches
2012-09-27 15:10 ` Larry Finger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50646C50.70703@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=andriy.shevchenko@linux.intel.com \
--cc=davem@davemloft.net \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).