[RFC] mac80211: add debugfs file for last ack signal

[RFC] mac80211: add debugfs file for last ack signal

[Saravana]

Add a debugfs file showing the signal strength
of the ack frame that is received for the
currently sent tx packet

Signed-off-by: Saravana <saravanad@posedge.com>
---
 net/mac80211/debugfs_sta.c |    2 ++
 net/mac80211/sta_info.h    |    2 ++
 net/mac80211/status.c      |    2 ++
 3 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 89281d2..1566941 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -53,6 +53,7 @@ static const struct file_operations sta_ ##name## _ops = {		\
 STA_FILE(aid, sta.aid, D);
 STA_FILE(dev, sdata->name, S);
 STA_FILE(last_signal, last_signal, D);
+STA_FILE(last_ack_signal, last_ack_signal, D);
 
 static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
 			      size_t count, loff_t *ppos)
@@ -369,6 +370,7 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta)
 	DEBUGFS_ADD(dev);
 	DEBUGFS_ADD(last_signal);
 	DEBUGFS_ADD(ht_capa);
+	DEBUGFS_ADD(last_ack_signal);
 
 	DEBUGFS_ADD_COUNTER(rx_packets, rx_packets);
 	DEBUGFS_ADD_COUNTER(tx_packets, tx_packets);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 6835cea..dce7693 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -250,6 +250,7 @@ struct sta_ampdu_mlme {
  * @rx_dropped: number of dropped MPDUs from this STA
  * @last_signal: signal of last received frame from this STA
  * @avg_signal: moving average of signal of received frames from this STA
+ * @last_ack_signal: signal of last received Ack frame from this STA
  * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
  * @tx_filtered_count: number of frames the hardware filtered for this STA
  * @tx_retry_failed: number of frames that failed retry
@@ -329,6 +330,7 @@ struct sta_info {
 	unsigned long rx_dropped;
 	int last_signal;
 	struct ewma avg_signal;
+	int last_ack_signal;
 	/* Plus 1 for non-QoS frames */
 	__le16 last_seq_ctrl[IEEE80211_NUM_TIDS + 1];
 
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 2d931ad..64dda41 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -539,6 +539,8 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 				sta->lost_packets = 0;
 			}
 		}
+		if (acked)
+			sta->last_ack_signal = info->status.ack_signal;
 	}
 
 	rcu_read_unlock();

Re: [RFC] mac80211: add debugfs file for last ack signal

[Johannes Berg]

On Wed, 2012-11-28 at 13:53 +0530, Saravana wrote:
> Add a debugfs file showing the signal strength
> of the ack frame that is received for the
> currently sent tx packet
> 
> Signed-off-by: Saravana <saravanad@posedge.com>
> ---
>  net/mac80211/debugfs_sta.c |    2 ++
>  net/mac80211/sta_info.h    |    2 ++
>  net/mac80211/status.c      |    2 ++
>  3 files changed, 6 insertions(+), 0 deletions(-)
> 
> diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
> index 89281d2..1566941 100644
> --- a/net/mac80211/debugfs_sta.c
> +++ b/net/mac80211/debugfs_sta.c
> @@ -53,6 +53,7 @@ static const struct file_operations sta_ ##name## _ops = {		\
>  STA_FILE(aid, sta.aid, D);
>  STA_FILE(dev, sdata->name, S);
>  STA_FILE(last_signal, last_signal, D);
> +STA_FILE(last_ack_signal, last_ack_signal, D);
>  
>  static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
>  			      size_t count, loff_t *ppos)
> @@ -369,6 +370,7 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta)
>  	DEBUGFS_ADD(dev);
>  	DEBUGFS_ADD(last_signal);
>  	DEBUGFS_ADD(ht_capa);
> +	DEBUGFS_ADD(last_ack_signal);
>  
>  	DEBUGFS_ADD_COUNTER(rx_packets, rx_packets);
>  	DEBUGFS_ADD_COUNTER(tx_packets, tx_packets);
> diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
> index 6835cea..dce7693 100644
> --- a/net/mac80211/sta_info.h
> +++ b/net/mac80211/sta_info.h
> @@ -250,6 +250,7 @@ struct sta_ampdu_mlme {
>   * @rx_dropped: number of dropped MPDUs from this STA
>   * @last_signal: signal of last received frame from this STA
>   * @avg_signal: moving average of signal of received frames from this STA
> + * @last_ack_signal: signal of last received Ack frame from this STA
>   * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
>   * @tx_filtered_count: number of frames the hardware filtered for this STA
>   * @tx_retry_failed: number of frames that failed retry
> @@ -329,6 +330,7 @@ struct sta_info {
>  	unsigned long rx_dropped;
>  	int last_signal;
>  	struct ewma avg_signal;
> +	int last_ack_signal;
>  	/* Plus 1 for non-QoS frames */
>  	__le16 last_seq_ctrl[IEEE80211_NUM_TIDS + 1];
>  
> diff --git a/net/mac80211/status.c b/net/mac80211/status.c
> index 2d931ad..64dda41 100644
> --- a/net/mac80211/status.c
> +++ b/net/mac80211/status.c
> @@ -539,6 +539,8 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
>  				sta->lost_packets = 0;
>  			}
>  		}
> +		if (acked)
> +			sta->last_ack_signal = info->status.ack_signal;

I'd prefer a blank line before the if

This patch was sent in a way that I could apply it. :-)

johannes

Re: [RFC] mac80211: add debugfs file for last ack signal

[Saravana]

On 11/28/2012 06:03 PM, Johannes Berg wrote:

>> +		if (acked)
>> +			sta->last_ack_signal = info->status.ack_signal;
> 
> I'd prefer a blank line before the if
> 
> This patch was sent in a way that I could apply it. :-)
> 
will re-submit the patch with the blank line inserted before the if.
> johannes
> 
> 

[RFC] mac80211: add debugfs file for last ack signal

[Saravana]

Add a debugfs file showing the signal strength
of the ack frame that is received for the
currently sent tx packet

Signed-off-by: Saravana <saravanad@posedge.com>
---
 net/mac80211/debugfs_sta.c |    2 ++
 net/mac80211/sta_info.h    |    2 ++
 net/mac80211/status.c      |    3 +++
 3 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 89281d2..1566941 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -53,6 +53,7 @@ static const struct file_operations sta_ ##name## _ops = {		\
 STA_FILE(aid, sta.aid, D);
 STA_FILE(dev, sdata->name, S);
 STA_FILE(last_signal, last_signal, D);
+STA_FILE(last_ack_signal, last_ack_signal, D);
 
 static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
 			      size_t count, loff_t *ppos)
@@ -369,6 +370,7 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta)
 	DEBUGFS_ADD(dev);
 	DEBUGFS_ADD(last_signal);
 	DEBUGFS_ADD(ht_capa);
+	DEBUGFS_ADD(last_ack_signal);
 
 	DEBUGFS_ADD_COUNTER(rx_packets, rx_packets);
 	DEBUGFS_ADD_COUNTER(tx_packets, tx_packets);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 6835cea..dce7693 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -250,6 +250,7 @@ struct sta_ampdu_mlme {
  * @rx_dropped: number of dropped MPDUs from this STA
  * @last_signal: signal of last received frame from this STA
  * @avg_signal: moving average of signal of received frames from this STA
+ * @last_ack_signal: signal of last received Ack frame from this STA
  * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
  * @tx_filtered_count: number of frames the hardware filtered for this STA
  * @tx_retry_failed: number of frames that failed retry
@@ -329,6 +330,7 @@ struct sta_info {
 	unsigned long rx_dropped;
 	int last_signal;
 	struct ewma avg_signal;
+	int last_ack_signal;
 	/* Plus 1 for non-QoS frames */
 	__le16 last_seq_ctrl[IEEE80211_NUM_TIDS + 1];
 
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 2d931ad..6400037 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -539,6 +539,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 				sta->lost_packets = 0;
 			}
 		}
+
+		if (acked)
+			sta->last_ack_signal = info->status.ack_signal;
 	}
 
 	rcu_read_unlock();

Re: [RFC] mac80211: add debugfs file for last ack signal

[Johannes Berg]

If you'd send them as [PATCH] I might even apply your patches ;)

johannes

[RFC] mac80211: add debugfs file for last ack signal

[saravanad]

Add a debugfs file showing the signal strength
of the ack frame that is received for the
currently sent tx packet.

Signed-off-by: Saravana <saravanad@posedge.com>
---
The diff file is generated from wireless-testing git tree.
  net/mac80211/debugfs_sta.c |    2 ++
  net/mac80211/sta_info.h    |    2 ++
  net/mac80211/status.c      |    2 ++
  3 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 89281d2..1566941 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -53,6 +53,7 @@ static const struct file_operations sta_ ##name## 
_ops = {		\
  STA_FILE(aid, sta.aid, D);
  STA_FILE(dev, sdata->name, S);
  STA_FILE(last_signal, last_signal, D);
+STA_FILE(last_ack_signal, last_ack_signal, D);

  static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
  			      size_t count, loff_t *ppos)
@@ -369,6 +370,7 @@ void ieee80211_sta_debugfs_add(struct sta_info 
*sta)
  	DEBUGFS_ADD(dev);
  	DEBUGFS_ADD(last_signal);
  	DEBUGFS_ADD(ht_capa);
+	DEBUGFS_ADD(last_ack_signal);

  	DEBUGFS_ADD_COUNTER(rx_packets, rx_packets);
  	DEBUGFS_ADD_COUNTER(tx_packets, tx_packets);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 776f3d0..e1f1fa2 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -249,6 +249,7 @@ struct sta_ampdu_mlme {
   * @rx_dropped: number of dropped MPDUs from this STA
   * @last_signal: signal of last received frame from this STA
   * @avg_signal: moving average of signal of received frames from this 
STA
+ * @last_ack_signal: signal of last received Ack frame from this STA
   * @last_seq_ctrl: last received seq/frag number from this STA (per RX 
queue)
   * @tx_filtered_count: number of frames the hardware filtered for this 
STA
   * @tx_retry_failed: number of frames that failed retry
@@ -328,6 +329,7 @@ struct sta_info {
  	unsigned long rx_dropped;
  	int last_signal;
  	struct ewma avg_signal;
+	int last_ack_signal;
  	/* Plus 1 for non-QoS frames */
  	__le16 last_seq_ctrl[IEEE80211_NUM_TIDS + 1];

diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index ab63237..c3c133c 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -539,6 +539,8 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, 
struct sk_buff *skb)
  				sta->lost_packets = 0;
  			}
  		}
+		if (acked)
+			sta->last_ack_signal = info->status.ack_signal;
  	}

  	rcu_read_unlock();

Re: [RFC] mac80211: add debugfs file for last ack signal

[Johannes Berg]

On Mon, 2012-11-26 at 05:57 -0800, saravanad@posedge.com wrote:
> Add a debugfs file showing the signal strength
> of the ack frame that is received for the
> currently sent tx packet.

This seems reasonable, but again line-wrapped.

johannes

Re: [RFC] mac80211: add debugfs file for last ack signal

[Saravana]

On 11/26/2012 08:45 PM, Johannes Berg wrote:
> On Mon, 2012-11-26 at 05:57 -0800, saravanad@posedge.com wrote:
>> Add a debugfs file showing the signal strength
>> of the ack frame that is received for the
>> currently sent tx packet.
>
> This seems reasonable, but again line-wrapped.
>
In my e-mail client i found that wrap long line settings was set to 
default value true. I have disabled the same and will re-send the patch.
The patch that i will be sending is based on mac80211-next tree.
> johannes
>
>
>