From: Will Hawkins <hawkinsw@opentechinstitute.org>
To: Antonio Quartulli <antonio@open-mesh.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCHv2 1/2] cfg80211: add the new IBSS_STA event
Date: Tue, 11 Dec 2012 11:37:44 -0500 [thread overview]
Message-ID: <50C76158.1010005@opentechinstitute.org> (raw)
In-Reply-To: <1355138182-11825-1-git-send-email-antonio@open-mesh.com>
Will this give IBSS something equivalent to the 802.11s
NL80211_CMD_NEW_PEER_CANDIDATE?
That's how I am reading it, but I just wanted to get some more context.
If this is what you are adding, it's great! Just exactly what I need.
Thanks for your work Antonio.
Will
On 12/10/2012 06:16 AM, Antonio Quartulli wrote:
> In IBSS mode it could be the case that a station being added
> is not ready for starting higher level routines (e.g. key
> exchange when IBSS/RSN is enabled). In particular, this can
> happen when we are waiting for the AUTH response message.
>
> This IBSS_STA event is triggered after the NEW_STA one and
> only when the upper layer is allowed to assume that the new
> peer is ready
>
> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
> ---
>
> 1/2 v2:
> * untouched
> 2/2 v2:
> * if userspace registered for auth frames, the new station is immediately
> authenticated and the new IBSS_STA event is triggered.
>
> include/net/cfg80211.h | 8 ++++++++
> include/uapi/linux/nl80211.h | 2 ++
> net/wireless/mlme.c | 9 +++++++++
> net/wireless/nl80211.c | 33 +++++++++++++++++++++++++++++++++
> net/wireless/nl80211.h | 3 +++
> 5 files changed, 55 insertions(+)
>
> diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> index 8e6a6b7..3266c03 100644
> --- a/include/net/cfg80211.h
> +++ b/include/net/cfg80211.h
> @@ -3497,6 +3497,14 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
> struct station_info *sinfo, gfp_t gfp);
>
> /**
> + * cfg80211_ibss_sta - notify userspace that the ibss station is ready
> + * @dev: the netdev
> + * @mac_addr: the station's address
> + * @gfp: allocation flags
> + */
> +void cfg80211_ibss_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
> +
> +/**
> * cfg80211_del_sta - notify userspace about deletion of a station
> *
> * @dev: the netdev
> diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
> index e3e19f8..7e0911e 100644
> --- a/include/uapi/linux/nl80211.h
> +++ b/include/uapi/linux/nl80211.h
> @@ -736,6 +736,8 @@ enum nl80211_commands {
>
> NL80211_CMD_SET_MCAST_RATE,
>
> + NL80211_CMD_IBSS_STATION,
> +
> /* add new commands above here */
>
> /* used to define NL80211_CMD_MAX below */
> diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
> index 5e8123e..f9493fc 100644
> --- a/net/wireless/mlme.c
> +++ b/net/wireless/mlme.c
> @@ -612,6 +612,15 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
> }
> EXPORT_SYMBOL(cfg80211_new_sta);
>
> +void cfg80211_ibss_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp)
> +{
> + struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
> + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
> +
> + nl80211_send_ibss_sta_event(rdev, dev, mac_addr, gfp);
> +}
> +EXPORT_SYMBOL(cfg80211_ibss_sta);
> +
> void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp)
> {
> struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index f45706a..2d27911 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -8564,6 +8564,39 @@ void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
> nl80211_mlme_mcgrp.id, gfp);
> }
>
> +void nl80211_send_ibss_sta_event(struct cfg80211_registered_device *rdev,
> + struct net_device *dev, const u8 *mac_addr,
> + gfp_t gfp)
> +{
> + struct sk_buff *msg;
> + void *hdr;
> +
> + msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
> + if (!msg)
> + return;
> +
> + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_IBSS_STATION);
> + if (!hdr) {
> + nlmsg_free(msg);
> + return;
> + }
> +
> + if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
> + nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr))
> + goto nla_put_failure;
> +
> + genlmsg_end(msg, hdr);
> +
> + genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
> + nl80211_mlme_mcgrp.id, gfp);
> + return;
> +
> + nla_put_failure:
> + genlmsg_cancel(msg, hdr);
> + nlmsg_free(msg);
> +}
> +
> +
> void nl80211_send_sta_del_event(struct cfg80211_registered_device *rdev,
> struct net_device *dev, const u8 *mac_addr,
> gfp_t gfp)
> diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
> index 2acba84..429f5d6 100644
> --- a/net/wireless/nl80211.h
> +++ b/net/wireless/nl80211.h
> @@ -85,6 +85,9 @@ void nl80211_send_remain_on_channel_cancel(
> void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
> struct net_device *dev, const u8 *mac_addr,
> struct station_info *sinfo, gfp_t gfp);
> +void nl80211_send_ibss_sta_event(struct cfg80211_registered_device *rdev,
> + struct net_device *dev, const u8 *mac_addr,
> + gfp_t gfp);
> void nl80211_send_sta_del_event(struct cfg80211_registered_device *rdev,
> struct net_device *dev, const u8 *mac_addr,
> gfp_t gfp);
>
next prev parent reply other threads:[~2012-12-11 16:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-10 11:16 [PATCHv2 1/2] cfg80211: add the new IBSS_STA event Antonio Quartulli
2012-12-10 11:16 ` [PATCHv2 2/2] mac80211: in AD-HOC mode wait for the AUTH response Antonio Quartulli
2012-12-11 16:37 ` Will Hawkins [this message]
2012-12-11 16:53 ` [PATCHv2 1/2] cfg80211: add the new IBSS_STA event Antonio Quartulli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50C76158.1010005@opentechinstitute.org \
--to=hawkinsw@opentechinstitute.org \
--cc=antonio@open-mesh.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).