From: Jiri Slaby <jslaby@suse.cz>
To: Nick Kossifidis <mickflemm@gmail.com>, Jiri Slaby <jirislaby@gmail.com>
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org,
ath5k-devel@lists.ath5k.org, linux-kernel@vger.kernel.org,
"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
Subject: Re: [PATCH] NET: ath5k, check ath5k_eeprom_mode_from_channel retval
Date: Tue, 19 Feb 2013 14:36:07 +0100 [thread overview]
Message-ID: <51237FC7.3070509@suse.cz> (raw)
In-Reply-To: <CAFtRNNwUaGFejpGHydDKD1Sn4zLYbmAeyO5zkS7wsHFZ_2yRfA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 712 bytes --]
On 02/18/2013 01:47 AM, Nick Kossifidis wrote:
> int
> ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
> {
> switch (channel->hw_value) {
> case AR5K_MODE_11A:
> return AR5K_EEPROM_MODE_11A;
> case AR5K_MODE_11G:
> return AR5K_EEPROM_MODE_11G;
> case AR5K_MODE_11B:
> return AR5K_EEPROM_MODE_11B;
> default:
> return -1;
> }
> }
>
> I think we should just change that default to return 0 instead and add
> an ATH5K_WARN there.
Something like the attached patch? It needs ah to be propagated to
eeprom. If you are fine with that, I'll send it as patch...
thanks,
--
js
suse labs
[-- Attachment #2: 0001-ath5k-cleanup-channel-to-eprom_mode-function.patch --]
[-- Type: text/x-patch, Size: 4040 bytes --]
>From 0e75c33da1f8b35ff1d25f08650e95fc97c01528 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Tue, 19 Feb 2013 14:31:13 +0100
Subject: [PATCH] ath5k: cleanup channel to eprom_mode function
Stop returning negative values from ath5k_eeprom_mode_from_channel.
Warn about that case instead and return the default/0/A. This cleans
up the callers, but needs to pass ah down to
ath5k_eeprom_mode_from_channel for ATH5K_WARN.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/net/wireless/ath/ath5k/eeprom.c | 6 ++++--
drivers/net/wireless/ath/ath5k/eeprom.h | 5 ++++-
drivers/net/wireless/ath/ath5k/phy.c | 20 +++-----------------
drivers/net/wireless/ath/ath5k/reset.c | 4 +---
4 files changed, 12 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index b7e0258..94d34ee 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1779,7 +1779,8 @@ ath5k_eeprom_detach(struct ath5k_hw *ah)
}
int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
+ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
{
switch (channel->hw_value) {
case AR5K_MODE_11A:
@@ -1789,6 +1790,7 @@ ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
case AR5K_MODE_11B:
return AR5K_EEPROM_MODE_11B;
default:
- return -1;
+ ATH5K_WARN(ah, "channel is not A/B/G!");
+ return AR5K_EEPROM_MODE_11A;
}
}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 94a9bbe..dcc3e40 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -494,5 +494,8 @@ struct ath5k_eeprom_info {
u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
};
+struct ath5k_hw;
+
int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel);
+ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index a78afa9..d6bc7cb 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1612,11 +1612,7 @@ ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
ah->ah_cal_mask |= AR5K_CALIBRATION_NF;
- ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
- if (WARN_ON(ee_mode < 0)) {
- ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF;
- return;
- }
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel);
/* completed NF calibration, test threshold */
nf = ath5k_hw_read_measured_noise_floor(ah);
@@ -2317,12 +2313,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
def_ant = ah->ah_def_ant;
- ee_mode = ath5k_eeprom_mode_from_channel(channel);
- if (ee_mode < 0) {
- ATH5K_ERR(ah,
- "invalid channel: %d\n", channel->center_freq);
- return;
- }
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
switch (ant_mode) {
case AR5K_ANTMODE_DEFAULT:
@@ -3622,12 +3613,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
return -EINVAL;
}
- ee_mode = ath5k_eeprom_mode_from_channel(channel);
- if (ee_mode < 0) {
- ATH5K_ERR(ah,
- "invalid channel: %d\n", channel->center_freq);
- return -EINVAL;
- }
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
/* Initialize TX power table */
switch (ah->ah_radio) {
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index e2d8b2c..a3399c4 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -984,9 +984,7 @@ ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
if (ah->ah_version == AR5K_AR5210)
return;
- ee_mode = ath5k_eeprom_mode_from_channel(channel);
- if (WARN_ON(ee_mode < 0))
- return;
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
/* Adjust power delta for channel 14 */
if (channel->center_freq == 2484)
--
1.8.1.2
next prev parent reply other threads:[~2013-02-19 13:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-07 13:44 [PATCH] NET: ath5k, check ath5k_eeprom_mode_from_channel retval Jiri Slaby
2013-02-18 0:47 ` Nick Kossifidis
2013-02-19 13:36 ` Jiri Slaby [this message]
2013-02-19 14:54 ` Nick Kossifidis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51237FC7.3070509@suse.cz \
--to=jslaby@suse.cz \
--cc=ath5k-devel@lists.ath5k.org \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@qca.qualcomm.com \
--cc=mickflemm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).