Re: a question about marvell sd8686's wmm_config_change event

[fengzeheng <zehengfeng@gmail.com>]

Hi, Holger and dan
    Sorry for my previous wrong message. I go through all the beacon
frames again and found that Ruckus AP update  WMM
IE:wmm_parameter_set_update_counter. But it's strange that other
elements of wmm settings remain unchanged, RUCKUS just update the
update_counter for none of wmm settings updated actually ..........
    thanks

2009/7/8 Holger Schurig <hs4233@mail.mn-solutions.de>:
> On Tuesday 07 July 2009 18:28:47 fengzeheng wrote:
>> hi, dan and all
>>      My wireless card sd8686 reports that wmm_config_change
>> about every 2 seconds though wmm's setting in AP's beacons
>> don't change. seems that driver receive
>> MACREG_INT_CODE_WMM_STATUS_CHANGE event from firmware every 2
>> seconds. And according
>
> Hmm, if the firmware sends you a
> MACREG_INT_CODE_WMM_STATUS_CHANGE but you're sure that the
> beacons don't change, then the firmware seems to be buggy.
>
> Not sure if Marvell got sane and opened up their support for
> no-NDA-holders, but you could try and file a bug there.
>
>
> And we should look into the libertas driver if we always loose a
> packet whenever we get a MACREG :-)
>
> Greetings, Holger
>
> --
> http://www.holgerschurig.de
>



-- 
Best Regards
Feng zeheng