linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: Support for Realtek USB PID 0bda:1724 (rtl8723a?)
@ 2013-03-21 22:42 Xose Vazquez Perez
  2013-03-21 23:23 ` Larry Finger
  0 siblings, 1 reply; 7+ messages in thread
From: Xose Vazquez Perez @ 2013-03-21 22:42 UTC (permalink / raw)
  To: linux-wireless, Larry Finger, dcbw

Larry Finger wrote:

> I was sort of hoping for a detachable device. I have sent a message to Realtek 
> asking them about any drivers and devices with this chip.

os_dep/linux/usb_intf.c:        {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDER_ID_REALTEK, 0x1724,0xff,0xff,0xff)}, //8723AU 1*1

https://github.com/liwei/rpi-rtl8188eu

^ permalink raw reply	[flat|nested] 7+ messages in thread
* Support for Realtek USB PID 0bda:1724 (rtl8723a?)
@ 2013-03-21 18:11 Dan Williams
  2013-03-21 18:27 ` Larry Finger
  0 siblings, 1 reply; 7+ messages in thread
From: Dan Williams @ 2013-03-21 18:11 UTC (permalink / raw)
  To: Larry Finger; +Cc: linux-wireless

Hi,

I've gotten a few questions about this device and wondered if support
for this is feasible; it's not in any of the rtlwifi vid/pid lists yet.

Some Internet Thread says there's a vendor driver here:

http://dl.dropbox.com/u/57056576/DRIVERS/REALTEK/rtl_92ce_92se_92de_8723ae_linux_mac80211_0006.0514.2012.tar.gz

but I failed to find the USB IDs for that device in here.

Dan


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2013-03-21 23:23 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-21 22:42 Support for Realtek USB PID 0bda:1724 (rtl8723a?) Xose Vazquez Perez
2013-03-21 23:23 ` Larry Finger
  -- strict thread matches above, loose matches on Subject: below --
2013-03-21 18:11 Dan Williams
2013-03-21 18:27 ` Larry Finger
2013-03-21 18:42   ` Dan Williams
2013-03-21 19:20     ` Larry Finger
2013-03-21 19:56       ` Dan Williams

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).