From: Vivekananda Holla <vivekanandah@posedge.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: [Patch] mac80211: SMPS for AP Mode
Date: Wed, 10 Apr 2013 14:24:32 +0530 [thread overview]
Message-ID: <516528C8.90509@posedge.com> (raw)
Patch for SMPS mode for AP. This is to define a new ieee80211_tx_info flag to allow a lower AP driver to set RTS/CTS protection for a dynamic SMPS station
Signed-off-by: Vivekananda Holla <vivekanandah@posedge.com>
---
include/net/mac80211.h | 4 ++++
net/mac80211/rc80211_minstrel_ht.c | 3 +++
2 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 64faf01..48a950c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -458,6 +458,9 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it
* would be fragmented by size (this is optional, only used for
* monitor injection).
+ * @IEEE80211_TX_CTL_SMPS_SET_RTS: set the RTS/CTS protection mechanism
+ * for the packet at AP when SMPS mode at the station is
+ * dynamic SMPS.
*
* Note: If you have to add new flags to the enumeration, then don't
* forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
@@ -493,6 +496,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_STATUS_EOSP = BIT(28),
IEEE80211_TX_CTL_USE_MINRATE = BIT(29),
IEEE80211_TX_CTL_DONTFRAG = BIT(30),
+ IEEE80211_TX_CTL_SMPS_SET_RTS = BIT(31),
};
#define IEEE80211_TX_CTL_STBC_SHIFT 23
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index d2b264d..84557e4 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -719,6 +719,9 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
info->flags |= mi->tx_flags;
minstrel_ht_check_cck_shortpreamble(mp, mi, txrc->short_preamble);
+ if (sta->smps_mode == IEEE80211_SMPS_DYNAMIC)
+ info->flags |= IEEE80211_TX_CTL_SMPS_SET_RTS;
+
/* Don't use EAPOL frames for sampling on non-mrr hw */
if (mp->hw->max_rates == 1 &&
txrc->skb->protocol == cpu_to_be16(ETH_P_PAE))
next reply other threads:[~2013-04-10 8:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-10 8:54 Vivekananda Holla [this message]
2013-04-10 8:55 ` [Patch] mac80211: SMPS for AP Mode Johannes Berg
2013-04-10 9:35 ` Vivekananda Holla
2013-04-10 9:46 ` Johannes Berg
2013-04-10 9:47 ` Johannes Berg
2013-04-10 9:55 ` Vivekananda Holla
-- strict thread matches above, loose matches on Subject: below --
2013-04-10 10:42 Vivekananda Holla
2013-04-10 11:18 ` Johannes Berg
2013-04-11 5:21 ` vivekanandah
2013-04-11 8:22 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=516528C8.90509@posedge.com \
--to=vivekanandah@posedge.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).