Re: Fwd: Realtek 8192CU not working

[Larry Finger <Larry.Finger@lwfinger.net>]

On 04/24/2013 12:27 PM, Michael Stahn wrote:
> okay now it gets a little awkward: un/reloading the driver seems to
> fix the authentication-problem (ip gets assigned), but no ping
> succeeds..
> http://bpaste.net/show/93913/
>
> 2013/4/24 Michael Stahn <michael.stahn.42@gmail.com>:
>> I'm using a i686 Architecture on AMD E2-1800 APU with Radeon(tm) HD
>> Graphics AuthenticAMD GNU/Linux with linux 3.7.10. CONFIG_USB_DEBUG
>> was allready set. I've used an USB 3.0 port previously and now
>> rechecked everything with a USB2.0 port. The result is nearly the
>> same: first connection succeeds (ping response), doing a manual
>> reconnect to the AP leads to the same error. I've done several
>> ifconfig down/ups at the end with no change.
>> dmesg gives: http://bpaste.net/show/93912/

To be able to work on the error messages from ehci-hcd, it is likely that we 
will need all the messages associated with the initialization of the hub. That 
is the reason that I asked that you post the entire dmesg output, starting at 
time 0.

What encryption are you using?

Larry