From: Larry Finger <Larry.Finger@lwfinger.net>
To: Michael Stahn <michael.stahn.42@gmail.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: Re: Fwd: Realtek 8192CU not working
Date: Thu, 25 Apr 2013 18:08:53 -0500 [thread overview]
Message-ID: <5179B785.7050704@lwfinger.net> (raw)
In-Reply-To: <CALvqYaQ_z7w6yLeNb=Q7Sm=Et3Rxj+TP6vi=KcyhDpT4AmY4kA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 423 bytes --]
On 04/24/2013 06:08 PM, Michael Stahn wrote:
> This kind of error doesn't seem to show up on the USB 2.0 interface. I
> just configured the AP for WPA+TKIP but no change. Now the Adapter
> won't connect anymore even I reload the module..pretty random error.
> I'll try some other ideas in the next days...
I found some problems today. With the attached patched, my device connects to
WEP, WPA and WPA2 networks.
Larry
[-- Attachment #2: rtl8192cu_fix_WPA_WEP --]
[-- Type: text/plain, Size: 11539 bytes --]
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
@@ -289,14 +289,30 @@ void rtl92c_set_key(struct ieee80211_hw
macaddr = cam_const_broad;
entry_id = key_index;
} else {
+ if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT) {
+ entry_id = rtl_cam_get_free_entry(hw,
+ p_macaddr);
+ if (entry_id >= TOTAL_CAM_ENTRY) {
+ RT_TRACE(rtlpriv, COMP_SEC,
+ DBG_EMERG,
+ "Can not find free hw security cam entry\n");
+ return;
+ }
+ } else {
+ entry_id = CAM_PAIRWISE_KEY_POSITION;
+ }
+
key_index = PAIRWISE_KEYIDX;
- entry_id = CAM_PAIRWISE_KEY_POSITION;
is_pairwise = true;
}
}
if (rtlpriv->sec.key_len[key_index] == 0) {
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"delete one entry\n");
+ if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT)
+ rtl_cam_del_entry(hw, p_macaddr);
rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
} else {
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -896,7 +896,7 @@ void rtl92cu_enable_hw_security_config(s
u8 sec_reg_value = 0x0;
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
"PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
rtlpriv->sec.pairwise_enc_algorithm,
rtlpriv->sec.group_enc_algorithm);
@@ -913,7 +913,7 @@ void rtl92cu_enable_hw_security_config(s
if (IS_NORMAL_CHIP(rtlhal->version))
sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
- RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "The SECR-value %x\n",
+ RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "The SECR-value %x\n",
sec_reg_value);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
}
@@ -1973,26 +1973,35 @@ void rtl92cu_set_hw_reg(struct ieee80211
}
}
-void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta,
- u8 rssi_level)
+static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 ratr_value = (u32) mac->basic_rates;
- u8 *mcsrate = mac->mcs;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u32 ratr_value;
u8 ratr_index = 0;
u8 nmode = mac->ht_enable;
- u8 mimo_ps = 1;
- u16 shortgi_rate = 0;
- u32 tmp_ratr_value = 0;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+ u16 shortgi_rate;
+ u32 tmp_ratr_value;
u8 curtxbw_40mhz = mac->bw_40;
- u8 curshortgi_40mhz = mac->sgi_40;
- u8 curshortgi_20mhz = mac->sgi_20;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
enum wireless_mode wirelessmode = mac->mode;
- ratr_value |= ((*(u16 *) (mcsrate))) << 12;
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_value = sta->supp_rates[1] << 4;
+ else
+ ratr_value = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_value = 0xfff;
+
+ ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
if (ratr_value & 0x0000000c)
@@ -2006,7 +2015,7 @@ void rtl92cu_update_hal_rate_table(struc
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
nmode = 1;
- if (mimo_ps == 0) {
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
ratr_value &= 0x0007F005;
} else {
u32 ratr_mask;
@@ -2016,8 +2025,7 @@ void rtl92cu_update_hal_rate_table(struc
ratr_mask = 0x000ff005;
else
ratr_mask = 0x0f0ff005;
- if (curtxbw_40mhz)
- ratr_mask |= 0x00000010;
+
ratr_value &= ratr_mask;
}
break;
@@ -2026,41 +2034,74 @@ void rtl92cu_update_hal_rate_table(struc
ratr_value &= 0x000ff0ff;
else
ratr_value &= 0x0f0ff0ff;
+
break;
}
+
ratr_value &= 0x0FFFFFFF;
- if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
- (!curtxbw_40mhz && curshortgi_20mhz))) {
+
+ if (nmode && ((curtxbw_40mhz &&
+ curshortgi_40mhz) || (!curtxbw_40mhz &&
+ curshortgi_20mhz))) {
+
ratr_value |= 0x10000000;
tmp_ratr_value = (ratr_value >> 12);
+
for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
if ((1 << shortgi_rate) & tmp_ratr_value)
break;
}
+
shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
- (shortgi_rate << 4) | (shortgi_rate);
+ (shortgi_rate << 4) | (shortgi_rate);
}
+
rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
+ rtl_read_dword(rtlpriv, REG_ARFR0));
}
-void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
+static void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 ratr_bitmap = (u32) mac->basic_rates;
- u8 *p_mcsrate = mac->mcs;
- u8 ratr_index = 0;
- u8 curtxbw_40mhz = mac->bw_40;
- u8 curshortgi_40mhz = mac->sgi_40;
- u8 curshortgi_20mhz = mac->sgi_20;
- enum wireless_mode wirelessmode = mac->mode;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u32 ratr_bitmap;
+ u8 ratr_index;
+ u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0;
+ u8 curshortgi_40mhz = curtxbw_40mhz &&
+ (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = 0;
bool shortgi = false;
u8 rate_mask[5];
u8 macid = 0;
- u8 mimops = 1;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
- ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12);
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ wirelessmode = sta_entry->wireless_mode;
+ if (mac->opmode == NL80211_IFTYPE_STATION ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT)
+ curtxbw_40mhz = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ macid = sta->aid + 1;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_bitmap = sta->supp_rates[1] << 4;
+ else
+ ratr_bitmap = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_bitmap = 0xfff;
+ ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
ratr_index = RATR_INX_WIRELESS_B;
@@ -2071,6 +2112,7 @@ void rtl92cu_update_hal_rate_mask(struct
break;
case WIRELESS_MODE_G:
ratr_index = RATR_INX_WIRELESS_GB;
+
if (rssi_level == 1)
ratr_bitmap &= 0x00000f00;
else if (rssi_level == 2)
@@ -2085,7 +2127,8 @@ void rtl92cu_update_hal_rate_mask(struct
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
ratr_index = RATR_INX_WIRELESS_NGB;
- if (mimops == 0) {
+
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
if (rssi_level == 1)
ratr_bitmap &= 0x00070000;
else if (rssi_level == 2)
@@ -2128,8 +2171,10 @@ void rtl92cu_update_hal_rate_mask(struct
}
}
}
+
if ((curtxbw_40mhz && curshortgi_40mhz) ||
(!curtxbw_40mhz && curshortgi_20mhz)) {
+
if (macid == 0)
shortgi = true;
else if (macid == 1)
@@ -2138,21 +2183,39 @@ void rtl92cu_update_hal_rate_mask(struct
break;
default:
ratr_index = RATR_INX_WIRELESS_NGB;
+
if (rtlphy->rf_type == RF_1T2R)
ratr_bitmap &= 0x000ff0ff;
else
ratr_bitmap &= 0x0f0ff0ff;
break;
}
- RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "ratr_bitmap :%x\n",
- ratr_bitmap);
- *(u32 *)&rate_mask = ((ratr_bitmap & 0x0fffffff) |
- ratr_index << 28);
+ sta_entry->ratr_index = ratr_index;
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+ "ratr_bitmap :%x\n", ratr_bitmap);
+ *(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) |
+ (ratr_index << 28);
rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
"Rate_index:%x, ratr_val:%x, %5phC\n",
ratr_index, ratr_bitmap, rate_mask);
rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
+
+ if (macid != 0)
+ sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->dm.useramask)
+ rtl92cu_update_hal_rate_mask(hw, sta, rssi_level);
+ else
+ rtl92cu_update_hal_rate_table(hw, sta);
}
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw)
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
@@ -98,10 +98,6 @@ void rtl92cu_update_interrupt_mask(struc
u32 add_msr, u32 rm_msr);
void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
-void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta,
- u8 rssi_level);
-void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level);
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw);
bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid);
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -106,8 +106,7 @@ static struct rtl_hal_ops rtl8192cu_hal_
.update_interrupt_mask = rtl92cu_update_interrupt_mask,
.get_hw_reg = rtl92cu_get_hw_reg,
.set_hw_reg = rtl92cu_set_hw_reg,
- .update_rate_tbl = rtl92cu_update_hal_rate_table,
- .update_rate_mask = rtl92cu_update_hal_rate_mask,
+ .update_rate_tbl = rtl92cu_update_hal_rate_tbl,
.fill_tx_desc = rtl92cu_tx_fill_desc,
.fill_fake_txdesc = rtl92cu_fill_fake_txdesc,
.fill_tx_cmddesc = rtl92cu_tx_fill_cmddesc,
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
@@ -49,5 +49,8 @@ bool rtl92cu_phy_set_rf_power_state(stru
u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 regaddr, u32 bitmask);
void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level);
#endif
next prev parent reply other threads:[~2013-04-25 23:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CALvqYaTZrtSsP9GQzH4B988KjPg+LRCcyREKZ1zkjoaEDKPHNA@mail.gmail.com>
2013-04-24 14:16 ` Fwd: Realtek 8192CU not working Michael Stahn
2013-04-24 14:49 ` Larry Finger
[not found] ` <CALvqYaQt+nL-PxSeEUNpsG9SWV+--S64ksr1UR+8TPg5dVPKXA@mail.gmail.com>
2013-04-24 16:47 ` Larry Finger
2013-04-24 17:19 ` Michael Stahn
2013-04-24 17:27 ` Michael Stahn
2013-04-24 17:42 ` Larry Finger
[not found] ` <CALvqYaQTQ5=ER=F1-bxnJQKkFjrg6UH+1JWLexUPVZ3cFBG5UQ@mail.gmail.com>
[not found] ` <51786303.3070107@lwfinger.net>
2013-04-24 23:08 ` Michael Stahn
2013-04-24 23:18 ` Larry Finger
2013-04-25 23:08 ` Larry Finger [this message]
2013-04-26 10:42 ` Michael Stahn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5179B785.7050704@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
--cc=michael.stahn.42@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).