[RFT 00/13] brcmsmac: bcm4313 iPA related patches

[RFT 00/13] brcmsmac: bcm4313 iPA related patches

[Arend van Spriel]

This series replaces the patch "[PATCH 12/12] brcmsmac: support 4313iPA"
with Message-ID: <1376130450-29746-13-git-send-email-arend@broadcom.com>.

It has been split up into individual patches. Please test this series
especially if you had issues with the original commit b6fc28a that was
reverted.

Cc: Jonas Gorski <jogo@openwrt.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>

Arend van Spriel (13):
  brcmsmac: cosmetic change in phy_lcn.c
  brcmsmac: change pa_gain for bcm4313 iPA
  brcmsmac: use ARRAY_SIZE in phytbl_lcn.c
  brcmsmac: add switch control table for BCM4313 iPA BT-combo cards
  brcmsmac: add debug info message providing phy and radio info
  brcmsmac: update transmit gain table for lcn phy
  brcmsmac: change lcnphy receive i/q calibration routine
  brcmsmac: fix TSSI idle estimation
  brcmsmac: avoid calling set_txpwr_by_index() twice
  brcmsmac: rework switch control table init including iPA BT-combo
  brcmsmac: correct phy registers for TSSI-based power control
  brcmsmac: reinitialize TSSI power control upon channel switch
  brcmsmac: add support for BCM4313 iPA variant

 drivers/net/wireless/brcm80211/brcmsmac/main.c     |    4 +-
 .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |  397 +++++++++++--------
 .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c   |  405 +++++++++++---------
 .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h   |    1 +
 4 files changed, 475 insertions(+), 332 deletions(-)

-- 
1.7.10.4

[RFT V2 01/13] brcmsmac: cosmetic change in phy_lcn.c

[Arend van Spriel]

Cleaning up some code fragments reducing indentation and uncluttering
some lines. Apart from whitespace there are no actual code changes
made.

Cc: Jonas Gorski <jogo@openwrt.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |  213 ++++++++++----------
 1 file changed, 106 insertions(+), 107 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 3d6b16c..e646ba0 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -1137,8 +1137,9 @@ wlc_lcnphy_set_rx_gain_by_distribution(struct brcms_phy *pi,
 	gain0_15 = ((biq1 & 0xf) << 12) |
 		   ((tia & 0xf) << 8) |
 		   ((lna2 & 0x3) << 6) |
-		   ((lna2 &
-		     0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0);
+		   ((lna2 & 0x3) << 4) |
+		   ((lna1 & 0x3) << 2) |
+		   ((lna1 & 0x3) << 0);
 
 	mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0);
 	mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0);
@@ -1368,126 +1369,124 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
 		goto cal_done;
 	}
 
-	if (module == 1) {
+	WARN_ON(module != 1);
+	tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
+	wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
 
-		tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
-		wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
+	for (i = 0; i < 11; i++)
+		values_to_save[i] =
+			read_radio_reg(pi, rxiq_cal_rf_reg[i]);
+	Core1TxControl_old = read_phy_reg(pi, 0x631);
+
+	or_phy_reg(pi, 0x631, 0x0015);
+
+	RFOverride0_old = read_phy_reg(pi, 0x44c);
+	RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
+	rfoverride2_old = read_phy_reg(pi, 0x4b0);
+	rfoverride2val_old = read_phy_reg(pi, 0x4b1);
+	rfoverride3_old = read_phy_reg(pi, 0x4f9);
+	rfoverride3val_old = read_phy_reg(pi, 0x4fa);
+	rfoverride4_old = read_phy_reg(pi, 0x938);
+	rfoverride4val_old = read_phy_reg(pi, 0x939);
+	afectrlovr_old = read_phy_reg(pi, 0x43b);
+	afectrlovrval_old = read_phy_reg(pi, 0x43c);
+	old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
+	old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
 
-		for (i = 0; i < 11; i++)
-			values_to_save[i] =
-				read_radio_reg(pi, rxiq_cal_rf_reg[i]);
-		Core1TxControl_old = read_phy_reg(pi, 0x631);
-
-		or_phy_reg(pi, 0x631, 0x0015);
-
-		RFOverride0_old = read_phy_reg(pi, 0x44c);
-		RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
-		rfoverride2_old = read_phy_reg(pi, 0x4b0);
-		rfoverride2val_old = read_phy_reg(pi, 0x4b1);
-		rfoverride3_old = read_phy_reg(pi, 0x4f9);
-		rfoverride3val_old = read_phy_reg(pi, 0x4fa);
-		rfoverride4_old = read_phy_reg(pi, 0x938);
-		rfoverride4val_old = read_phy_reg(pi, 0x939);
-		afectrlovr_old = read_phy_reg(pi, 0x43b);
-		afectrlovrval_old = read_phy_reg(pi, 0x43c);
-		old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
-		old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
-
-		tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
-		if (tx_gain_override_old) {
-			wlc_lcnphy_get_tx_gain(pi, &old_gains);
-			tx_gain_index_old = pi_lcn->lcnphy_current_index;
-		}
+	tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
+	if (tx_gain_override_old) {
+		wlc_lcnphy_get_tx_gain(pi, &old_gains);
+		tx_gain_index_old = pi_lcn->lcnphy_current_index;
+	}
 
-		wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
+	wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
 
-		mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
-		mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
+	mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
+	mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
 
-		mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
-		mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
+	mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
+	mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
 
-		write_radio_reg(pi, RADIO_2064_REG116, 0x06);
-		write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
-		write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
-		write_radio_reg(pi, RADIO_2064_REG098, 0x03);
-		write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
-		mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
-		write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
-		write_radio_reg(pi, RADIO_2064_REG114, 0x01);
-		write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
-		write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
-
-		mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
-		mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
-		mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
-		mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
-		mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
-		mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
-		mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
-		mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
-		mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
-		mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
-
-		mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
-		mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
-
-		wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0);
-		write_phy_reg(pi, 0x6da, 0xffff);
-		or_phy_reg(pi, 0x6db, 0x3);
-		wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
-		wlc_lcnphy_rx_gain_override_enable(pi, true);
-
-		tia_gain = 8;
-		rx_pwr_threshold = 950;
-		while (tia_gain > 0) {
-			tia_gain -= 1;
-			wlc_lcnphy_set_rx_gain_by_distribution(pi,
-							       0, 0, 2, 2,
-							       (u16)
-							       tia_gain, 1, 0);
-			udelay(500);
+	write_radio_reg(pi, RADIO_2064_REG116, 0x06);
+	write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
+	write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
+	write_radio_reg(pi, RADIO_2064_REG098, 0x03);
+	write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
+	mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
+	write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
+	write_radio_reg(pi, RADIO_2064_REG114, 0x01);
+	write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
+	write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
+
+	mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
+	mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
+	mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
+	mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
+	mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
+	mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
+	mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
+	mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
+	mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
+	mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
 
-			received_power =
-				wlc_lcnphy_measure_digital_power(pi, 2000);
-			if (received_power < rx_pwr_threshold)
-				break;
-		}
-		result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff);
+	mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
+	mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
 
-		wlc_lcnphy_stop_tx_tone(pi);
+	wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0);
+	write_phy_reg(pi, 0x6da, 0xffff);
+	or_phy_reg(pi, 0x6db, 0x3);
+	wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
+	wlc_lcnphy_rx_gain_override_enable(pi, true);
 
-		write_phy_reg(pi, 0x631, Core1TxControl_old);
+	tia_gain = 8;
+	rx_pwr_threshold = 950;
+	while (tia_gain > 0) {
+		tia_gain -= 1;
+		wlc_lcnphy_set_rx_gain_by_distribution(pi,
+						       0, 0, 2, 2,
+						       (u16)
+						       tia_gain, 1, 0);
+		udelay(500);
 
-		write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
-		write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
-		write_phy_reg(pi, 0x4b0, rfoverride2_old);
-		write_phy_reg(pi, 0x4b1, rfoverride2val_old);
-		write_phy_reg(pi, 0x4f9, rfoverride3_old);
-		write_phy_reg(pi, 0x4fa, rfoverride3val_old);
-		write_phy_reg(pi, 0x938, rfoverride4_old);
-		write_phy_reg(pi, 0x939, rfoverride4val_old);
-		write_phy_reg(pi, 0x43b, afectrlovr_old);
-		write_phy_reg(pi, 0x43c, afectrlovrval_old);
-		write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
-		write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
+		received_power =
+			wlc_lcnphy_measure_digital_power(pi, 2000);
+		if (received_power < rx_pwr_threshold)
+			break;
+	}
+	result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff);
 
-		wlc_lcnphy_clear_trsw_override(pi);
+	wlc_lcnphy_stop_tx_tone(pi);
 
-		mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
+	write_phy_reg(pi, 0x631, Core1TxControl_old);
+
+	write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
+	write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
+	write_phy_reg(pi, 0x4b0, rfoverride2_old);
+	write_phy_reg(pi, 0x4b1, rfoverride2val_old);
+	write_phy_reg(pi, 0x4f9, rfoverride3_old);
+	write_phy_reg(pi, 0x4fa, rfoverride3val_old);
+	write_phy_reg(pi, 0x938, rfoverride4_old);
+	write_phy_reg(pi, 0x939, rfoverride4val_old);
+	write_phy_reg(pi, 0x43b, afectrlovr_old);
+	write_phy_reg(pi, 0x43c, afectrlovrval_old);
+	write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
+	write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
 
-		for (i = 0; i < 11; i++)
-			write_radio_reg(pi, rxiq_cal_rf_reg[i],
-					values_to_save[i]);
+	wlc_lcnphy_clear_trsw_override(pi);
 
-		if (tx_gain_override_old)
-			wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
-		else
-			wlc_lcnphy_disable_tx_gain_override(pi);
+	mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
 
-		wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
-		wlc_lcnphy_rx_gain_override_enable(pi, false);
-	}
+	for (i = 0; i < 11; i++)
+		write_radio_reg(pi, rxiq_cal_rf_reg[i],
+				values_to_save[i]);
+
+	if (tx_gain_override_old)
+		wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
+	else
+		wlc_lcnphy_disable_tx_gain_override(pi);
+
+	wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
+	wlc_lcnphy_rx_gain_override_enable(pi, false);
 
 cal_done:
 	kfree(ptr);
-- 
1.7.10.4

[RFT V2 02/13] brcmsmac: change pa_gain for bcm4313 iPA

[Arend van Spriel]

The function wlc_lcnphy_load_tx_gain_table() has a target PA
gain specified for the iPA variant of the bcm4313. This gain
value is reduced to avoid PA distortion. The if-statement is
removed because it was rather redundant in the first place.
Please not that this patch does not provide full iPA support.

Cc: Jonas Gorski <jogo@openwrt.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index e646ba0..8dc5d0f 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -4282,13 +4282,10 @@ wlc_lcnphy_load_tx_gain_table(struct brcms_phy *pi,
 	u16 pa_gain;
 	u16 gm_gain;
 
-	if (CHSPEC_IS5G(pi->radio_chanspec))
-		pa_gain = 0x70;
-	else
-		pa_gain = 0x70;
-
 	if (pi->sh->boardflags & BFL_FEM)
 		pa_gain = 0x10;
+	else
+		pa_gain = 0x60;
 	tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
 	tab.tbl_width = 32;
 	tab.tbl_len = 1;
-- 
1.7.10.4

[RFT V2 03/13] brcmsmac: use ARRAY_SIZE in phytbl_lcn.c

[Arend van Spriel]

This patch converts all sizeof(x)/sizeof(x[0]) instances to
ARRAY_SIZE macro in phytbl_lcn.c. The patch was made using
spatch with ARRAY_SIZE.cocci (see [1]).

[1] https://github.com/coccinelle/coccinelle/tree/master/demos/janitorings

Cc: Jonas Gorski <jogo@openwrt.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c   |  117 ++++++++------------
 1 file changed, 44 insertions(+), 73 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
index 622c01c..deae3a7 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
@@ -1507,117 +1507,103 @@ static const u32 dot11lcn_gain_tbl_5G[] = {
 
 const struct phytbl_info dot11lcnphytbl_rx_gain_info_rev0[] = {
 	{&dot11lcn_gain_tbl_rev0,
-	 sizeof(dot11lcn_gain_tbl_rev0) / sizeof(dot11lcn_gain_tbl_rev0[0]), 18,
+	 ARRAY_SIZE(dot11lcn_gain_tbl_rev0), 18,
 	 0, 32}
 	,
 	{&dot11lcn_aux_gain_idx_tbl_rev0,
-	 sizeof(dot11lcn_aux_gain_idx_tbl_rev0) /
-	 sizeof(dot11lcn_aux_gain_idx_tbl_rev0[0]), 14, 0, 16}
+	 ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_rev0), 14, 0, 16}
 	,
 	{&dot11lcn_gain_idx_tbl_rev0,
-	 sizeof(dot11lcn_gain_idx_tbl_rev0) /
-	 sizeof(dot11lcn_gain_idx_tbl_rev0[0]), 13, 0, 32}
+	 ARRAY_SIZE(dot11lcn_gain_idx_tbl_rev0), 13, 0, 32}
 	,
 };
 
 static const struct phytbl_info dot11lcnphytbl_rx_gain_info_rev1[] = {
 	{&dot11lcn_gain_tbl_rev1,
-	 sizeof(dot11lcn_gain_tbl_rev1) / sizeof(dot11lcn_gain_tbl_rev1[0]), 18,
+	 ARRAY_SIZE(dot11lcn_gain_tbl_rev1), 18,
 	 0, 32}
 	,
 	{&dot11lcn_aux_gain_idx_tbl_rev0,
-	 sizeof(dot11lcn_aux_gain_idx_tbl_rev0) /
-	 sizeof(dot11lcn_aux_gain_idx_tbl_rev0[0]), 14, 0, 16}
+	 ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_rev0), 14, 0, 16}
 	,
 	{&dot11lcn_gain_idx_tbl_rev0,
-	 sizeof(dot11lcn_gain_idx_tbl_rev0) /
-	 sizeof(dot11lcn_gain_idx_tbl_rev0[0]), 13, 0, 32}
+	 ARRAY_SIZE(dot11lcn_gain_idx_tbl_rev0), 13, 0, 32}
 	,
 };
 
 const struct phytbl_info dot11lcnphytbl_rx_gain_info_2G_rev2[] = {
 	{&dot11lcn_gain_tbl_2G,
-	 sizeof(dot11lcn_gain_tbl_2G) / sizeof(dot11lcn_gain_tbl_2G[0]), 18, 0,
+	 ARRAY_SIZE(dot11lcn_gain_tbl_2G), 18, 0,
 	 32}
 	,
 	{&dot11lcn_aux_gain_idx_tbl_2G,
-	 sizeof(dot11lcn_aux_gain_idx_tbl_2G) /
-	 sizeof(dot11lcn_aux_gain_idx_tbl_2G[0]), 14, 0, 16}
+	 ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_2G), 14, 0, 16}
 	,
 	{&dot11lcn_gain_idx_tbl_2G,
-	 sizeof(dot11lcn_gain_idx_tbl_2G) / sizeof(dot11lcn_gain_idx_tbl_2G[0]),
+	 ARRAY_SIZE(dot11lcn_gain_idx_tbl_2G),
 	 13, 0, 32}
 	,
 	{&dot11lcn_gain_val_tbl_2G,
-	 sizeof(dot11lcn_gain_val_tbl_2G) / sizeof(dot11lcn_gain_val_tbl_2G[0]),
+	 ARRAY_SIZE(dot11lcn_gain_val_tbl_2G),
 	 17, 0, 8}
 };
 
 const struct phytbl_info dot11lcnphytbl_rx_gain_info_5G_rev2[] = {
 	{&dot11lcn_gain_tbl_5G,
-	 sizeof(dot11lcn_gain_tbl_5G) / sizeof(dot11lcn_gain_tbl_5G[0]), 18, 0,
+	 ARRAY_SIZE(dot11lcn_gain_tbl_5G), 18, 0,
 	 32}
 	,
 	{&dot11lcn_aux_gain_idx_tbl_5G,
-	 sizeof(dot11lcn_aux_gain_idx_tbl_5G) /
-	 sizeof(dot11lcn_aux_gain_idx_tbl_5G[0]), 14, 0, 16}
+	 ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_5G), 14, 0, 16}
 	,
 	{&dot11lcn_gain_idx_tbl_5G,
-	 sizeof(dot11lcn_gain_idx_tbl_5G) / sizeof(dot11lcn_gain_idx_tbl_5G[0]),
+	 ARRAY_SIZE(dot11lcn_gain_idx_tbl_5G),
 	 13, 0, 32}
 	,
 	{&dot11lcn_gain_val_tbl_5G,
-	 sizeof(dot11lcn_gain_val_tbl_5G) / sizeof(dot11lcn_gain_val_tbl_5G[0]),
+	 ARRAY_SIZE(dot11lcn_gain_val_tbl_5G),
 	 17, 0, 8}
 };
 
 const struct phytbl_info dot11lcnphytbl_rx_gain_info_extlna_2G_rev2[] = {
 	{&dot11lcn_gain_tbl_extlna_2G,
-	 sizeof(dot11lcn_gain_tbl_extlna_2G) /
-	 sizeof(dot11lcn_gain_tbl_extlna_2G[0]), 18, 0, 32}
+	 ARRAY_SIZE(dot11lcn_gain_tbl_extlna_2G), 18, 0, 32}
 	,
 	{&dot11lcn_aux_gain_idx_tbl_extlna_2G,
-	 sizeof(dot11lcn_aux_gain_idx_tbl_extlna_2G) /
-	 sizeof(dot11lcn_aux_gain_idx_tbl_extlna_2G[0]), 14, 0, 16}
+	 ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_extlna_2G), 14, 0, 16}
 	,
 	{&dot11lcn_gain_idx_tbl_extlna_2G,
-	 sizeof(dot11lcn_gain_idx_tbl_extlna_2G) /
-	 sizeof(dot11lcn_gain_idx_tbl_extlna_2G[0]), 13, 0, 32}
+	 ARRAY_SIZE(dot11lcn_gain_idx_tbl_extlna_2G), 13, 0, 32}
 	,
 	{&dot11lcn_gain_val_tbl_extlna_2G,
-	 sizeof(dot11lcn_gain_val_tbl_extlna_2G) /
-	 sizeof(dot11lcn_gain_val_tbl_extlna_2G[0]), 17, 0, 8}
+	 ARRAY_SIZE(dot11lcn_gain_val_tbl_extlna_2G), 17, 0, 8}
 };
 
 const struct phytbl_info dot11lcnphytbl_rx_gain_info_extlna_5G_rev2[] = {
 	{&dot11lcn_gain_tbl_5G,
-	 sizeof(dot11lcn_gain_tbl_5G) / sizeof(dot11lcn_gain_tbl_5G[0]), 18, 0,
+	 ARRAY_SIZE(dot11lcn_gain_tbl_5G), 18, 0,
 	 32}
 	,
 	{&dot11lcn_aux_gain_idx_tbl_5G,
-	 sizeof(dot11lcn_aux_gain_idx_tbl_5G) /
-	 sizeof(dot11lcn_aux_gain_idx_tbl_5G[0]), 14, 0, 16}
+	 ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_5G), 14, 0, 16}
 	,
 	{&dot11lcn_gain_idx_tbl_5G,
-	 sizeof(dot11lcn_gain_idx_tbl_5G) / sizeof(dot11lcn_gain_idx_tbl_5G[0]),
+	 ARRAY_SIZE(dot11lcn_gain_idx_tbl_5G),
 	 13, 0, 32}
 	,
 	{&dot11lcn_gain_val_tbl_5G,
-	 sizeof(dot11lcn_gain_val_tbl_5G) / sizeof(dot11lcn_gain_val_tbl_5G[0]),
+	 ARRAY_SIZE(dot11lcn_gain_val_tbl_5G),
 	 17, 0, 8}
 };
 
 const u32 dot11lcnphytbl_rx_gain_info_sz_rev0 =
-	sizeof(dot11lcnphytbl_rx_gain_info_rev0) /
-	sizeof(dot11lcnphytbl_rx_gain_info_rev0[0]);
+	ARRAY_SIZE(dot11lcnphytbl_rx_gain_info_rev0);
 
 const u32 dot11lcnphytbl_rx_gain_info_2G_rev2_sz =
-	sizeof(dot11lcnphytbl_rx_gain_info_2G_rev2) /
-	sizeof(dot11lcnphytbl_rx_gain_info_2G_rev2[0]);
+	ARRAY_SIZE(dot11lcnphytbl_rx_gain_info_2G_rev2);
 
 const u32 dot11lcnphytbl_rx_gain_info_5G_rev2_sz =
-	sizeof(dot11lcnphytbl_rx_gain_info_5G_rev2) /
-	sizeof(dot11lcnphytbl_rx_gain_info_5G_rev2[0]);
+	ARRAY_SIZE(dot11lcnphytbl_rx_gain_info_5G_rev2);
 
 static const u16 dot11lcn_min_sig_sq_tbl_rev0[] = {
 	0x014d,
@@ -2771,89 +2757,74 @@ static const u32 dot11lcn_papd_compdelta_tbl_rev0[] = {
 
 const struct phytbl_info dot11lcnphytbl_info_rev0[] = {
 	{&dot11lcn_min_sig_sq_tbl_rev0,
-	 sizeof(dot11lcn_min_sig_sq_tbl_rev0) /
-	 sizeof(dot11lcn_min_sig_sq_tbl_rev0[0]), 2, 0, 16}
+	 ARRAY_SIZE(dot11lcn_min_sig_sq_tbl_rev0), 2, 0, 16}
 	,
 	{&dot11lcn_noise_scale_tbl_rev0,
-	 sizeof(dot11lcn_noise_scale_tbl_rev0) /
-	 sizeof(dot11lcn_noise_scale_tbl_rev0[0]), 1, 0, 16}
+	 ARRAY_SIZE(dot11lcn_noise_scale_tbl_rev0), 1, 0, 16}
 	,
 	{&dot11lcn_fltr_ctrl_tbl_rev0,
-	 sizeof(dot11lcn_fltr_ctrl_tbl_rev0) /
-	 sizeof(dot11lcn_fltr_ctrl_tbl_rev0[0]), 11, 0, 32}
+	 ARRAY_SIZE(dot11lcn_fltr_ctrl_tbl_rev0), 11, 0, 32}
 	,
 	{&dot11lcn_ps_ctrl_tbl_rev0,
-	 sizeof(dot11lcn_ps_ctrl_tbl_rev0) /
-	 sizeof(dot11lcn_ps_ctrl_tbl_rev0[0]), 12, 0, 32}
+	 ARRAY_SIZE(dot11lcn_ps_ctrl_tbl_rev0), 12, 0, 32}
 	,
 	{&dot11lcn_gain_idx_tbl_rev0,
-	 sizeof(dot11lcn_gain_idx_tbl_rev0) /
-	 sizeof(dot11lcn_gain_idx_tbl_rev0[0]), 13, 0, 32}
+	 ARRAY_SIZE(dot11lcn_gain_idx_tbl_rev0), 13, 0, 32}
 	,
 	{&dot11lcn_aux_gain_idx_tbl_rev0,
-	 sizeof(dot11lcn_aux_gain_idx_tbl_rev0) /
-	 sizeof(dot11lcn_aux_gain_idx_tbl_rev0[0]), 14, 0, 16}
+	 ARRAY_SIZE(dot11lcn_aux_gain_idx_tbl_rev0), 14, 0, 16}
 	,
 	{&dot11lcn_sw_ctrl_tbl_rev0,
-	 sizeof(dot11lcn_sw_ctrl_tbl_rev0) /
-	 sizeof(dot11lcn_sw_ctrl_tbl_rev0[0]), 15, 0, 16}
+	 ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_rev0), 15, 0, 16}
 	,
 	{&dot11lcn_nf_table_rev0,
-	 sizeof(dot11lcn_nf_table_rev0) / sizeof(dot11lcn_nf_table_rev0[0]), 16,
+	 ARRAY_SIZE(dot11lcn_nf_table_rev0), 16,
 	 0, 8}
 	,
 	{&dot11lcn_gain_val_tbl_rev0,
-	 sizeof(dot11lcn_gain_val_tbl_rev0) /
-	 sizeof(dot11lcn_gain_val_tbl_rev0[0]), 17, 0, 8}
+	 ARRAY_SIZE(dot11lcn_gain_val_tbl_rev0), 17, 0, 8}
 	,
 	{&dot11lcn_gain_tbl_rev0,
-	 sizeof(dot11lcn_gain_tbl_rev0) / sizeof(dot11lcn_gain_tbl_rev0[0]), 18,
+	 ARRAY_SIZE(dot11lcn_gain_tbl_rev0), 18,
 	 0, 32}
 	,
 	{&dot11lcn_spur_tbl_rev0,
-	 sizeof(dot11lcn_spur_tbl_rev0) / sizeof(dot11lcn_spur_tbl_rev0[0]), 20,
+	 ARRAY_SIZE(dot11lcn_spur_tbl_rev0), 20,
 	 0, 8}
 	,
 	{&dot11lcn_unsup_mcs_tbl_rev0,
-	 sizeof(dot11lcn_unsup_mcs_tbl_rev0) /
-	 sizeof(dot11lcn_unsup_mcs_tbl_rev0[0]), 23, 0, 16}
+	 ARRAY_SIZE(dot11lcn_unsup_mcs_tbl_rev0), 23, 0, 16}
 	,
 	{&dot11lcn_iq_local_tbl_rev0,
-	 sizeof(dot11lcn_iq_local_tbl_rev0) /
-	 sizeof(dot11lcn_iq_local_tbl_rev0[0]), 0, 0, 16}
+	 ARRAY_SIZE(dot11lcn_iq_local_tbl_rev0), 0, 0, 16}
 	,
 	{&dot11lcn_papd_compdelta_tbl_rev0,
-	 sizeof(dot11lcn_papd_compdelta_tbl_rev0) /
-	 sizeof(dot11lcn_papd_compdelta_tbl_rev0[0]), 24, 0, 32}
+	 ARRAY_SIZE(dot11lcn_papd_compdelta_tbl_rev0), 24, 0, 32}
 	,
 };
 
 const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313 = {
 	&dot11lcn_sw_ctrl_tbl_4313_rev0,
-	sizeof(dot11lcn_sw_ctrl_tbl_4313_rev0) /
-	sizeof(dot11lcn_sw_ctrl_tbl_4313_rev0[0]), 15, 0, 16
+	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_rev0), 15, 0, 16
 };
 
 const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa = {
 	&dot11lcn_sw_ctrl_tbl_4313_epa_rev0,
-	sizeof(dot11lcn_sw_ctrl_tbl_4313_epa_rev0) /
-	sizeof(dot11lcn_sw_ctrl_tbl_4313_epa_rev0[0]), 15, 0, 16
+	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_epa_rev0), 15, 0, 16
 };
 
 const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa = {
 	&dot11lcn_sw_ctrl_tbl_4313_epa_rev0_combo,
-	sizeof(dot11lcn_sw_ctrl_tbl_4313_epa_rev0_combo) /
-	sizeof(dot11lcn_sw_ctrl_tbl_4313_epa_rev0_combo[0]), 15, 0, 16
+	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_epa_rev0_combo), 15, 0, 16
 };
 
 const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250 = {
 	&dot11lcn_sw_ctrl_tbl_4313_bt_epa_p250_rev0,
-	sizeof(dot11lcn_sw_ctrl_tbl_4313_bt_epa_p250_rev0) /
-	sizeof(dot11lcn_sw_ctrl_tbl_4313_bt_epa_p250_rev0[0]), 15, 0, 16
+	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_bt_epa_p250_rev0), 15, 0, 16
 };
 
 const u32 dot11lcnphytbl_info_sz_rev0 =
-	sizeof(dot11lcnphytbl_info_rev0) / sizeof(dot11lcnphytbl_info_rev0[0]);
+	ARRAY_SIZE(dot11lcnphytbl_info_rev0);
 
 const struct lcnphy_tx_gain_tbl_entry
 dot11lcnphy_2GHz_extPA_gaintable_rev0[128] = {
-- 
1.7.10.4

[RFT V2 04/13] brcmsmac: add switch control table for BCM4313 iPA BT-combo cards

[Arend van Spriel]

The bcm4313 iPA BT-WLAN combo cards need to be initialized with
a different switch control table. This patch adds that table.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c   |   72 ++++++++++++++++++++
 .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h   |    1 +
 2 files changed, 73 insertions(+)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
index deae3a7..36c41df 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
@@ -2044,6 +2044,73 @@ static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = {
 	0x0005,
 };
 
+static const u16 dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo[] = {
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+};
+
 static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = {
 	0x0004,
 	0x0004,
@@ -2808,6 +2875,11 @@ const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313 = {
 	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_rev0), 15, 0, 16
 };
 
+const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa = {
+	&dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo,
+	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo), 15, 0, 16
+};
+
 const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa = {
 	&dot11lcn_sw_ctrl_tbl_4313_epa_rev0,
 	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_epa_rev0), 15, 0, 16
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h
index 5f75e16..489422a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h
@@ -20,6 +20,7 @@
 extern const struct phytbl_info dot11lcnphytbl_rx_gain_info_rev0[];
 extern const u32 dot11lcnphytbl_rx_gain_info_sz_rev0;
 extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313;
+extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa;
 extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa;
 extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa_combo;
 extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa;
-- 
1.7.10.4

[RFT V2 05/13] brcmsmac: add debug info message providing phy and radio info

[Arend van Spriel]

For debug purposes it is good to have the phy and radio information
available in the log. Only logged when driver is build when BRCMDBG
or BRCM_TRACING kconfig are set.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/main.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 7ca10bf..c3c6123 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -4652,7 +4652,9 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core,
 		wlc->band->phyrev = wlc_hw->band->phyrev;
 		wlc->band->radioid = wlc_hw->band->radioid;
 		wlc->band->radiorev = wlc_hw->band->radiorev;
-
+		brcms_dbg_info(core, "wl%d: phy %u/%u radio %x/%u\n", unit,
+			       wlc->band->phytype, wlc->band->phyrev,
+			       wlc->band->radioid, wlc->band->radiorev);
 		/* default contention windows size limits */
 		wlc_hw->band->CWmin = APHY_CWMIN;
 		wlc_hw->band->CWmax = PHY_CWMAX;
-- 
1.7.10.4

[RFT V2 06/13] brcmsmac: update transmit gain table for lcn phy

[Arend van Spriel]

Update the transmit gain table for bcm4313 chip family.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c   |  216 ++++++++++----------
 1 file changed, 108 insertions(+), 108 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
index 36c41df..d7fa312 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
@@ -3031,134 +3031,134 @@ dot11lcnphy_2GHz_extPA_gaintable_rev0[128] = {
 };
 
 const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_2GHz_gaintable_rev0[128] = {
-	{7, 0, 31, 0, 72},
-	{7, 0, 31, 0, 70},
-	{7, 0, 31, 0, 68},
-	{7, 0, 30, 0, 67},
-	{7, 0, 29, 0, 68},
-	{7, 0, 28, 0, 68},
-	{7, 0, 27, 0, 69},
-	{7, 0, 26, 0, 70},
-	{7, 0, 25, 0, 70},
-	{7, 0, 24, 0, 71},
-	{7, 0, 23, 0, 72},
-	{7, 0, 23, 0, 70},
-	{7, 0, 22, 0, 71},
-	{7, 0, 21, 0, 72},
-	{7, 0, 21, 0, 70},
-	{7, 0, 21, 0, 68},
-	{7, 0, 21, 0, 66},
-	{7, 0, 21, 0, 64},
-	{7, 0, 21, 0, 63},
-	{7, 0, 20, 0, 64},
-	{7, 0, 19, 0, 65},
-	{7, 0, 19, 0, 64},
-	{7, 0, 18, 0, 65},
-	{7, 0, 18, 0, 64},
-	{7, 0, 17, 0, 65},
-	{7, 0, 17, 0, 64},
-	{7, 0, 16, 0, 65},
-	{7, 0, 16, 0, 64},
-	{7, 0, 16, 0, 62},
-	{7, 0, 16, 0, 60},
-	{7, 0, 16, 0, 58},
-	{7, 0, 15, 0, 61},
-	{7, 0, 15, 0, 59},
-	{7, 0, 14, 0, 61},
-	{7, 0, 14, 0, 60},
-	{7, 0, 14, 0, 58},
-	{7, 0, 13, 0, 60},
-	{7, 0, 13, 0, 59},
-	{7, 0, 12, 0, 62},
-	{7, 0, 12, 0, 60},
-	{7, 0, 12, 0, 58},
-	{7, 0, 11, 0, 62},
-	{7, 0, 11, 0, 60},
-	{7, 0, 11, 0, 59},
-	{7, 0, 11, 0, 57},
-	{7, 0, 10, 0, 61},
-	{7, 0, 10, 0, 59},
-	{7, 0, 10, 0, 57},
-	{7, 0, 9, 0, 62},
-	{7, 0, 9, 0, 60},
-	{7, 0, 9, 0, 58},
-	{7, 0, 9, 0, 57},
-	{7, 0, 8, 0, 62},
-	{7, 0, 8, 0, 60},
-	{7, 0, 8, 0, 58},
-	{7, 0, 8, 0, 57},
-	{7, 0, 8, 0, 55},
-	{7, 0, 7, 0, 61},
+	{15, 0, 31, 0, 72},
+	{15, 0, 31, 0, 70},
+	{15, 0, 31, 0, 68},
+	{15, 0, 30, 0, 68},
+	{15, 0, 29, 0, 69},
+	{15, 0, 28, 0, 69},
+	{15, 0, 27, 0, 70},
+	{15, 0, 26, 0, 70},
+	{15, 0, 25, 0, 71},
+	{15, 0, 24, 0, 72},
+	{15, 0, 23, 0, 73},
+	{15, 0, 23, 0, 71},
+	{15, 0, 22, 0, 72},
+	{15, 0, 21, 0, 73},
+	{15, 0, 21, 0, 71},
+	{15, 0, 21, 0, 69},
+	{15, 0, 21, 0, 67},
+	{15, 0, 21, 0, 65},
+	{15, 0, 21, 0, 63},
+	{15, 0, 20, 0, 65},
+	{15, 0, 19, 0, 66},
+	{15, 0, 19, 0, 64},
+	{15, 0, 18, 0, 66},
+	{15, 0, 18, 0, 64},
+	{15, 0, 17, 0, 66},
+	{15, 0, 17, 0, 64},
+	{15, 0, 16, 0, 66},
+	{15, 0, 16, 0, 64},
+	{15, 0, 16, 0, 62},
+	{15, 0, 16, 0, 61},
+	{15, 0, 16, 0, 59},
+	{15, 0, 15, 0, 61},
+	{15, 0, 15, 0, 59},
+	{15, 0, 14, 0, 62},
+	{15, 0, 14, 0, 60},
+	{15, 0, 14, 0, 58},
+	{15, 0, 13, 0, 61},
+	{15, 0, 13, 0, 59},
+	{15, 0, 12, 0, 62},
+	{15, 0, 12, 0, 61},
+	{15, 0, 12, 0, 59},
+	{15, 0, 11, 0, 62},
+	{15, 0, 11, 0, 61},
+	{15, 0, 11, 0, 59},
+	{15, 0, 11, 0, 57},
+	{15, 0, 10, 0, 61},
+	{15, 0, 10, 0, 59},
+	{15, 0, 10, 0, 58},
+	{15, 0, 9, 0, 62},
+	{15, 0, 9, 0, 61},
+	{15, 0, 9, 0, 59},
+	{15, 0, 9, 0, 57},
+	{15, 0, 8, 0, 62},
+	{15, 0, 8, 0, 61},
+	{15, 0, 8, 0, 59},
+	{15, 0, 8, 0, 57},
+	{15, 0, 8, 0, 56},
+	{15, 0, 8, 0, 54},
+	{15, 0, 8, 0, 53},
+	{15, 0, 8, 0, 51},
+	{15, 0, 8, 0, 50},
+	{7, 0, 7, 0, 69},
+	{7, 0, 7, 0, 67},
+	{7, 0, 7, 0, 65},
+	{7, 0, 7, 0, 64},
+	{7, 0, 7, 0, 62},
 	{7, 0, 7, 0, 60},
 	{7, 0, 7, 0, 58},
-	{7, 0, 7, 0, 56},
+	{7, 0, 7, 0, 57},
 	{7, 0, 7, 0, 55},
 	{7, 0, 6, 0, 62},
-	{7, 0, 6, 0, 60},
-	{7, 0, 6, 0, 58},
+	{7, 0, 6, 0, 61},
+	{7, 0, 6, 0, 59},
 	{7, 0, 6, 0, 57},
-	{7, 0, 6, 0, 55},
+	{7, 0, 6, 0, 56},
 	{7, 0, 6, 0, 54},
-	{7, 0, 6, 0, 52},
+	{7, 0, 6, 0, 53},
 	{7, 0, 5, 0, 61},
-	{7, 0, 5, 0, 59},
-	{7, 0, 5, 0, 57},
+	{7, 0, 5, 0, 60},
+	{7, 0, 5, 0, 58},
 	{7, 0, 5, 0, 56},
-	{7, 0, 5, 0, 54},
+	{7, 0, 5, 0, 55},
 	{7, 0, 5, 0, 53},
-	{7, 0, 5, 0, 51},
-	{7, 0, 4, 0, 62},
-	{7, 0, 4, 0, 60},
-	{7, 0, 4, 0, 58},
+	{7, 0, 5, 0, 52},
+	{7, 0, 5, 0, 50},
+	{7, 0, 5, 0, 49},
+	{7, 0, 5, 0, 47},
 	{7, 0, 4, 0, 57},
-	{7, 0, 4, 0, 55},
+	{7, 0, 4, 0, 56},
 	{7, 0, 4, 0, 54},
-	{7, 0, 4, 0, 52},
+	{7, 0, 4, 0, 53},
 	{7, 0, 4, 0, 51},
-	{7, 0, 4, 0, 49},
+	{7, 0, 4, 0, 50},
 	{7, 0, 4, 0, 48},
+	{7, 0, 4, 0, 47},
 	{7, 0, 4, 0, 46},
-	{7, 0, 3, 0, 60},
-	{7, 0, 3, 0, 58},
-	{7, 0, 3, 0, 57},
-	{7, 0, 3, 0, 55},
-	{7, 0, 3, 0, 54},
-	{7, 0, 3, 0, 52},
+	{7, 0, 4, 0, 44},
+	{7, 0, 4, 0, 43},
+	{7, 0, 4, 0, 42},
+	{7, 0, 4, 0, 41},
+	{7, 0, 4, 0, 40},
 	{7, 0, 3, 0, 51},
-	{7, 0, 3, 0, 49},
+	{7, 0, 3, 0, 50},
 	{7, 0, 3, 0, 48},
+	{7, 0, 3, 0, 47},
 	{7, 0, 3, 0, 46},
-	{7, 0, 3, 0, 45},
 	{7, 0, 3, 0, 44},
 	{7, 0, 3, 0, 43},
+	{7, 0, 3, 0, 42},
 	{7, 0, 3, 0, 41},
-	{7, 0, 2, 0, 61},
-	{7, 0, 2, 0, 59},
-	{7, 0, 2, 0, 57},
-	{7, 0, 2, 0, 56},
-	{7, 0, 2, 0, 54},
-	{7, 0, 2, 0, 53},
-	{7, 0, 2, 0, 51},
-	{7, 0, 2, 0, 50},
-	{7, 0, 2, 0, 48},
-	{7, 0, 2, 0, 47},
-	{7, 0, 2, 0, 46},
-	{7, 0, 2, 0, 44},
-	{7, 0, 2, 0, 43},
-	{7, 0, 2, 0, 42},
-	{7, 0, 2, 0, 41},
-	{7, 0, 2, 0, 39},
-	{7, 0, 2, 0, 38},
-	{7, 0, 2, 0, 37},
-	{7, 0, 2, 0, 36},
-	{7, 0, 2, 0, 35},
-	{7, 0, 2, 0, 34},
-	{7, 0, 2, 0, 33},
-	{7, 0, 2, 0, 32},
-	{7, 0, 1, 0, 63},
-	{7, 0, 1, 0, 61},
-	{7, 0, 1, 0, 59},
-	{7, 0, 1, 0, 57},
+	{3, 0, 3, 0, 56},
+	{3, 0, 3, 0, 54},
+	{3, 0, 3, 0, 53},
+	{3, 0, 3, 0, 51},
+	{3, 0, 3, 0, 50},
+	{3, 0, 3, 0, 48},
+	{3, 0, 3, 0, 47},
+	{3, 0, 3, 0, 46},
+	{3, 0, 3, 0, 44},
+	{3, 0, 3, 0, 43},
+	{3, 0, 3, 0, 42},
+	{3, 0, 3, 0, 41},
+	{3, 0, 3, 0, 39},
+	{3, 0, 3, 0, 38},
+	{3, 0, 3, 0, 37},
+	{3, 0, 3, 0, 36},
+	{3, 0, 3, 0, 35},
+	{3, 0, 3, 0, 34},
 };
 
 const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_5GHz_gaintable_rev0[128] = {
-- 
1.7.10.4

[RFT V2 07/13] brcmsmac: change lcnphy receive i/q calibration routine

[Arend van Spriel]

The gain setting for the test tone of the i/q calibration is
controlled has changed. This gain level needs to be set correctly
before the i/q compensation can be determined.

Cc: Jonas Gorski <jogo@openwrt.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |   78 +++++++++++++++-----
 1 file changed, 58 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 8dc5d0f..8099d74 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -1329,6 +1329,43 @@ static u32 wlc_lcnphy_measure_digital_power(struct brcms_phy *pi, u16 nsamples)
 	return (iq_est.i_pwr + iq_est.q_pwr) / nsamples;
 }
 
+static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain,
+				      u16 tia_gain, u16 lna2_gain)
+{
+	u32 i_thresh_l, q_thresh_l;
+	u32 i_thresh_h, q_thresh_h;
+	struct lcnphy_iq_est iq_est_h, iq_est_l;
+
+	wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain,
+					       lna2_gain, 0);
+
+	wlc_lcnphy_rx_gain_override_enable(pi, true);
+	wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0);
+	udelay(500);
+	write_radio_reg(pi, RADIO_2064_REG112, 0);
+	if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l))
+		return false;
+
+	wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0);
+	udelay(500);
+	write_radio_reg(pi, RADIO_2064_REG112, 0);
+	if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h))
+		return false;
+
+	i_thresh_l = (iq_est_l.i_pwr << 1);
+	i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr;
+
+	q_thresh_l = (iq_est_l.q_pwr << 1);
+	q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr;
+	if ((iq_est_h.i_pwr > i_thresh_l) &&
+	    (iq_est_h.i_pwr < i_thresh_h) &&
+	    (iq_est_h.q_pwr > q_thresh_l) &&
+	    (iq_est_h.q_pwr < q_thresh_h))
+		return true;
+
+	return false;
+}
+
 static bool
 wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
 		     const struct lcnphy_rx_iqcomp *iqcomp,
@@ -1343,8 +1380,8 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
 	    RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old,
 	    rfoverride3_old, rfoverride3val_old, rfoverride4_old,
 	    rfoverride4val_old, afectrlovr_old, afectrlovrval_old;
-	int tia_gain;
-	u32 received_power, rx_pwr_threshold;
+	int tia_gain, lna2_gain, biq1_gain;
+	bool set_gain;
 	u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl;
 	u16 values_to_save[11];
 	s16 *ptr;
@@ -1432,29 +1469,30 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
 	mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
 	mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
 
-	wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0);
 	write_phy_reg(pi, 0x6da, 0xffff);
 	or_phy_reg(pi, 0x6db, 0x3);
-	wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
-	wlc_lcnphy_rx_gain_override_enable(pi, true);
-
-	tia_gain = 8;
-	rx_pwr_threshold = 950;
-	while (tia_gain > 0) {
-		tia_gain -= 1;
-		wlc_lcnphy_set_rx_gain_by_distribution(pi,
-						       0, 0, 2, 2,
-						       (u16)
-						       tia_gain, 1, 0);
-		udelay(500);
 
-		received_power =
-			wlc_lcnphy_measure_digital_power(pi, 2000);
-		if (received_power < rx_pwr_threshold)
-			break;
+	wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
+	for (lna2_gain = 3; lna2_gain >= 0; lna2_gain--) {
+		for (tia_gain = 4; tia_gain >= 0; tia_gain--) {
+			for (biq1_gain = 6; biq1_gain >= 0; biq1_gain--) {
+				set_gain = wlc_lcnphy_rx_iq_cal_gain(pi,
+								     (u16)
+								     biq1_gain,
+								     (u16)
+								     tia_gain,
+								     (u16)
+								     lna2_gain);
+				if (set_gain) {
+					result = wlc_lcnphy_calc_rx_iq_comp(pi,
+									    1024);
+					goto stop_tone;
+				}
+			}
+		}
 	}
-	result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff);
 
+stop_tone:
 	wlc_lcnphy_stop_tx_tone(pi);
 
 	write_phy_reg(pi, 0x631, Core1TxControl_old);
-- 
1.7.10.4

[RFT V2 08/13] brcmsmac: fix TSSI idle estimation

[Arend van Spriel]

The baseband multiplier must be zero during TSSI idle estimation
and restored afterwards.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 8099d74..96be1ba 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -2836,6 +2836,8 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
 		read_radio_reg(pi, RADIO_2064_REG007) & 1;
 	u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10;
 	u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4;
+	u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi);
+
 	idleTssi = read_phy_reg(pi, 0x4ab);
 	suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) &
 			 MCTL_EN_MAC));
@@ -2853,6 +2855,12 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
 	mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4);
 	mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2);
 	wlc_lcnphy_tssi_setup(pi);
+
+	mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0));
+	mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6));
+
+	wlc_lcnphy_set_bbmult(pi, 0x0);
+
 	wlc_phy_do_dummy_tx(pi, true, OFF);
 	idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0))
 		    >> 0);
@@ -2874,6 +2882,7 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
 
 	mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12);
 
+	wlc_lcnphy_set_bbmult(pi, SAVE_bbmult);
 	wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old);
 	wlc_lcnphy_set_tx_gain(pi, &old_gains);
 	wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl);
-- 
1.7.10.4

[RFT V2 09/13] brcmsmac: avoid calling set_txpwr_by_index() twice

[Arend van Spriel]

For lcnphy revision 1 or when hardware supports i/q calibration the
function wlc_lcnphy_set_txpwr_by_index() was called twice.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 96be1ba..e02729d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -3897,7 +3897,6 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi)
 	target_gains.pad_gain = 21;
 	target_gains.dac_gain = 0;
 	wlc_lcnphy_set_tx_gain(pi, &target_gains);
-	wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
 
 	if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) {
 
@@ -3908,6 +3907,7 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi)
 					lcnphy_recal ? LCNPHY_CAL_RECAL :
 					LCNPHY_CAL_FULL), false);
 	} else {
+		wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
 		wlc_lcnphy_tx_iqlo_soft_cal_full(pi);
 	}
 
-- 
1.7.10.4

[RFT V2 10/13] brcmsmac: rework switch control table init including iPA BT-combo

[Arend van Spriel]

Rework the code path in lcnphy tbl_init() for switch control
table programming. This also takes the iPA BT-combo card into
account.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |   31 ++++++++++----------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index e02729d..732371c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -4573,6 +4573,7 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi)
 	uint idx;
 	u8 phybw40;
 	struct phytbl_info tab;
+	const struct phytbl_info *tb;
 	u32 val;
 
 	phybw40 = CHSPEC_IS40(pi->radio_chanspec);
@@ -4619,7 +4620,6 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi)
 	}
 
 	if (LCNREV_IS(pi->pubpi.phy_rev, 2)) {
-		const struct phytbl_info *tb;
 		int l;
 
 		if (CHSPEC_IS2G(pi->radio_chanspec)) {
@@ -4640,21 +4640,22 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi)
 			wlc_lcnphy_write_table(pi, &tb[idx]);
 	}
 
-	if ((pi->sh->boardflags & BFL_FEM)
-	    && !(pi->sh->boardflags & BFL_FEM_BT))
-		wlc_lcnphy_write_table(pi, &dot11lcn_sw_ctrl_tbl_info_4313_epa);
-	else if (pi->sh->boardflags & BFL_FEM_BT) {
-		if (pi->sh->boardrev < 0x1250)
-			wlc_lcnphy_write_table(
-				pi,
-				&dot11lcn_sw_ctrl_tbl_info_4313_bt_epa);
+	if (pi->sh->boardflags & BFL_FEM) {
+		if (pi->sh->boardflags & BFL_FEM_BT) {
+			if (pi->sh->boardrev < 0x1250)
+				tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_epa;
+			else
+				tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250;
+		} else {
+			tb = &dot11lcn_sw_ctrl_tbl_info_4313_epa;
+		}
+	} else {
+		if (pi->sh->boardflags & BFL_FEM_BT)
+			tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa;
 		else
-			wlc_lcnphy_write_table(
-				pi,
-				&dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250);
-	} else
-		wlc_lcnphy_write_table(pi, &dot11lcn_sw_ctrl_tbl_info_4313);
-
+			tb = &dot11lcn_sw_ctrl_tbl_info_4313;
+	}
+	wlc_lcnphy_write_table(pi, tb);
 	wlc_lcnphy_load_rfpower(pi);
 
 	wlc_lcnphy_clear_papd_comptable(pi);
-- 
1.7.10.4

[RFT V2 11/13] brcmsmac: correct phy registers for TSSI-based power control

[Arend van Spriel]

A number of additional phy registers needs to be programmed when
using TSSI-based power control.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 732371c..a0a268d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -2020,6 +2020,16 @@ wlc_lcnphy_set_tssi_mux(struct brcms_phy *pi, enum lcnphy_tssi_mode pos)
 		} else {
 			mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1);
 			mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
+			mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0);
+			mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2);
+			mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0);
+			mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4);
+			mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
+			mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77);
+			mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1);
+			mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7);
+			mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1);
+			mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4);
 		}
 	} else {
 		mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2);
@@ -2106,6 +2116,7 @@ static void wlc_lcnphy_pwrctrl_rssiparams(struct brcms_phy *pi)
 		    (auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12));
 
 	mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5));
+	mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0));
 }
 
 static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
@@ -2218,6 +2229,10 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
 
 	mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8);
 
+	mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0);
+	mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
+	mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
+
 	wlc_lcnphy_pwrctrl_rssiparams(pi);
 }
 
@@ -3096,6 +3111,11 @@ static void wlc_lcnphy_tx_pwr_ctrl_init(struct brcms_phy_pub *ppi)
 			wlc_lcnphy_write_table(pi, &tab);
 			tab.tbl_offset++;
 		}
+		mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0);
+		mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0);
+		mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8);
+		mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4);
+		mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2);
 
 		mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7);
 
-- 
1.7.10.4

[RFT V2 12/13] brcmsmac: reinitialize TSSI power control upon channel switch

[Arend van Spriel]

When changing channels the TSSI based power control needs to be
reinitialized.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index a0a268d..6e6bc28 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -5019,6 +5019,8 @@ void wlc_phy_chanspec_set_lcnphy(struct brcms_phy *pi, u16 chanspec)
 		wlc_lcnphy_load_tx_iir_filter(pi, true, 3);
 
 	mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3);
+	if (wlc_lcnphy_tssi_based_pwr_ctrl_enabled(pi))
+		wlc_lcnphy_tssi_setup(pi);
 }
 
 void wlc_phy_detach_lcnphy(struct brcms_phy *pi)
-- 
1.7.10.4

[RFT V2 13/13] brcmsmac: add support for BCM4313 iPA variant

[Arend van Spriel]

This patch completes the changes needed for supporting the
iPA variant cards of the BCM4313 wireless chipset.

Cc: Jonas Gorski <jogo@openwrt.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maximilian Engelhardt <maxi@daemonizer.de>
Cc: David Costa <david@zarel.net>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
 .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |   71 ++++++++++++++------
 1 file changed, 51 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 6e6bc28..4ba5d62 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -1826,6 +1826,17 @@ wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel)
 		write_radio_reg(pi, RADIO_2064_REG038, 3);
 		write_radio_reg(pi, RADIO_2064_REG091, 7);
 	}
+
+	if (!(pi->sh->boardflags & BFL_FEM)) {
+		u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc,
+			0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0};
+
+		write_radio_reg(pi, RADIO_2064_REG02A, 0xf);
+		write_radio_reg(pi, RADIO_2064_REG091, 0x3);
+		write_radio_reg(pi, RADIO_2064_REG038, 0x3);
+
+		write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]);
+	}
 }
 
 static int
@@ -2123,7 +2134,16 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
 {
 	struct phytbl_info tab;
 	u32 rfseq, ind;
+	enum lcnphy_tssi_mode mode;
+	u8 tssi_sel;
 
+	if (pi->sh->boardflags & BFL_FEM) {
+		tssi_sel = 0x1;
+		mode = LCNPHY_TSSI_EXT;
+	} else {
+		tssi_sel = 0xe;
+		mode = LCNPHY_TSSI_POST_PA;
+	}
 	tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
 	tab.tbl_width = 32;
 	tab.tbl_ptr = &ind;
@@ -2144,7 +2164,7 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
 
 	mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4);
 
-	wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
+	wlc_lcnphy_set_tssi_mux(pi, mode);
 	mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14);
 
 	mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15);
@@ -2180,9 +2200,10 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
 	mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0);
 
 	if (LCNREV_IS(pi->pubpi.phy_rev, 2)) {
-		mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe);
+		mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel);
 		mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4);
 	} else {
+		mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1);
 		mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1);
 		mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3);
 	}
@@ -4358,8 +4379,11 @@ wlc_lcnphy_load_tx_gain_table(struct brcms_phy *pi,
 	tab.tbl_len = 1;
 	tab.tbl_ptr = &val;
 
+	/* fixed gm_gain value for iPA */
+	gm_gain = 15;
 	for (j = 0; j < 128; j++) {
-		gm_gain = gain_table[j].gm;
+		if (pi->sh->boardflags & BFL_FEM)
+			gm_gain = gain_table[j].gm;
 		val = (((u32) pa_gain << 24) |
 		       (gain_table[j].pad << 16) |
 		       (gain_table[j].pga << 8) | gm_gain);
@@ -4570,7 +4594,10 @@ static void wlc_radio_2064_init(struct brcms_phy *pi)
 
 	write_phy_reg(pi, 0x4ea, 0x4688);
 
-	mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
+	if (pi->sh->boardflags & BFL_FEM)
+		mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
+	else
+		mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0);
 
 	mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6);
 
@@ -4581,6 +4608,13 @@ static void wlc_radio_2064_init(struct brcms_phy *pi)
 	wlc_lcnphy_rcal(pi);
 
 	wlc_lcnphy_rc_cal(pi);
+
+	if (!(pi->sh->boardflags & BFL_FEM)) {
+		write_radio_reg(pi, RADIO_2064_REG032, 0x6f);
+		write_radio_reg(pi, RADIO_2064_REG033, 0x19);
+		write_radio_reg(pi, RADIO_2064_REG039, 0xe);
+	}
+
 }
 
 static void wlc_lcnphy_radio_init(struct brcms_phy *pi)
@@ -4611,22 +4645,20 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi)
 		wlc_lcnphy_write_table(pi, &tab);
 	}
 
-	tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
-	tab.tbl_width = 16;
-	tab.tbl_ptr = &val;
-	tab.tbl_len = 1;
-
-	val = 114;
-	tab.tbl_offset = 0;
-	wlc_lcnphy_write_table(pi, &tab);
+	if (!(pi->sh->boardflags & BFL_FEM)) {
+		tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
+		tab.tbl_width = 16;
+		tab.tbl_ptr = &val;
+		tab.tbl_len = 1;
 
-	val = 130;
-	tab.tbl_offset = 1;
-	wlc_lcnphy_write_table(pi, &tab);
+		val = 150;
+		tab.tbl_offset = 0;
+		wlc_lcnphy_write_table(pi, &tab);
 
-	val = 6;
-	tab.tbl_offset = 8;
-	wlc_lcnphy_write_table(pi, &tab);
+		val = 220;
+		tab.tbl_offset = 1;
+		wlc_lcnphy_write_table(pi, &tab);
+	}
 
 	if (CHSPEC_IS2G(pi->radio_chanspec)) {
 		if (pi->sh->boardflags & BFL_FEM)
@@ -5059,8 +5091,7 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi)
 	if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
 		return false;
 
-	if ((pi->sh->boardflags & BFL_FEM) &&
-	    (LCNREV_IS(pi->pubpi.phy_rev, 1))) {
+	if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
 		if (pi_lcn->lcnphy_tempsense_option == 3) {
 			pi->hwpwrctrl = true;
 			pi->hwpwrctrl_capable = true;
-- 
1.7.10.4

Re: [RFT 00/13] brcmsmac: bcm4313 iPA related patches

[David Herrmann]

Hi

On Tue, Aug 13, 2013 at 10:03 PM, Arend van Spriel <arend@broadcom.com> wrote:
> This series replaces the patch "[PATCH 12/12] brcmsmac: support 4313iPA"
> with Message-ID: <1376130450-29746-13-git-send-email-arend@broadcom.com>.
>
> It has been split up into individual patches. Please test this series
> especially if you had issues with the original commit b6fc28a that was
> reverted.
>
> Cc: Jonas Gorski <jogo@openwrt.org>
> Cc: David Herrmann <dh.herrmann@gmail.com>
> Cc: Maximilian Engelhardt <maxi@daemonizer.de>
> Cc: David Costa <david@zarel.net>

Is this available in a public branch that I can merge? And what should
be used as base? 3.11-rc5? linux-next?

Cheers
David

> Arend van Spriel (13):
>   brcmsmac: cosmetic change in phy_lcn.c
>   brcmsmac: change pa_gain for bcm4313 iPA
>   brcmsmac: use ARRAY_SIZE in phytbl_lcn.c
>   brcmsmac: add switch control table for BCM4313 iPA BT-combo cards
>   brcmsmac: add debug info message providing phy and radio info
>   brcmsmac: update transmit gain table for lcn phy
>   brcmsmac: change lcnphy receive i/q calibration routine
>   brcmsmac: fix TSSI idle estimation
>   brcmsmac: avoid calling set_txpwr_by_index() twice
>   brcmsmac: rework switch control table init including iPA BT-combo
>   brcmsmac: correct phy registers for TSSI-based power control
>   brcmsmac: reinitialize TSSI power control upon channel switch
>   brcmsmac: add support for BCM4313 iPA variant
>
>  drivers/net/wireless/brcm80211/brcmsmac/main.c     |    4 +-
>  .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |  397 +++++++++++--------
>  .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c   |  405 +++++++++++---------
>  .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h   |    1 +
>  4 files changed, 475 insertions(+), 332 deletions(-)
>
> --
> 1.7.10.4
>
>

Re: [RFT 00/13] brcmsmac: bcm4313 iPA related patches

[Arend van Spriel]

On 08/13/2013 10:09 PM, David Herrmann wrote:
> Hi
>
> On Tue, Aug 13, 2013 at 10:03 PM, Arend van Spriel <arend@broadcom.com> wrote:
>> This series replaces the patch "[PATCH 12/12] brcmsmac: support 4313iPA"
>> with Message-ID: <1376130450-29746-13-git-send-email-arend@broadcom.com>.
>>
>> It has been split up into individual patches. Please test this series
>> especially if you had issues with the original commit b6fc28a that was
>> reverted.
>>
>> Cc: Jonas Gorski <jogo@openwrt.org>
>> Cc: David Herrmann <dh.herrmann@gmail.com>
>> Cc: Maximilian Engelhardt <maxi@daemonizer.de>
>> Cc: David Costa <david@zarel.net>
>
> Is this available in a public branch that I can merge? And what should
> be used as base? 3.11-rc5? linux-next?

Indeed I should have mentioned. It applies on v3.11-rc5 for sure. Did 
not try linux-next.

Regards,
Arend

> Cheers
> David
>
>> Arend van Spriel (13):
>>    brcmsmac: cosmetic change in phy_lcn.c
>>    brcmsmac: change pa_gain for bcm4313 iPA
>>    brcmsmac: use ARRAY_SIZE in phytbl_lcn.c
>>    brcmsmac: add switch control table for BCM4313 iPA BT-combo cards
>>    brcmsmac: add debug info message providing phy and radio info
>>    brcmsmac: update transmit gain table for lcn phy
>>    brcmsmac: change lcnphy receive i/q calibration routine
>>    brcmsmac: fix TSSI idle estimation
>>    brcmsmac: avoid calling set_txpwr_by_index() twice
>>    brcmsmac: rework switch control table init including iPA BT-combo
>>    brcmsmac: correct phy registers for TSSI-based power control
>>    brcmsmac: reinitialize TSSI power control upon channel switch
>>    brcmsmac: add support for BCM4313 iPA variant
>>
>>   drivers/net/wireless/brcm80211/brcmsmac/main.c     |    4 +-
>>   .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |  397 +++++++++++--------
>>   .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c   |  405 +++++++++++---------
>>   .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h   |    1 +
>>   4 files changed, 475 insertions(+), 332 deletions(-)
>>
>> --
>> 1.7.10.4
>>
>>
>

Re: [RFT 00/13] brcmsmac: bcm4313 iPA related patches

[David Herrmann]

Hi

On Tue, Aug 13, 2013 at 10:46 PM, Arend van Spriel <arend@broadcom.com> wrote:
> On 08/13/2013 10:09 PM, David Herrmann wrote:
>>
>> Hi
>>
>> On Tue, Aug 13, 2013 at 10:03 PM, Arend van Spriel <arend@broadcom.com>
>> wrote:
>>>
>>> This series replaces the patch "[PATCH 12/12] brcmsmac: support 4313iPA"
>>> with Message-ID: <1376130450-29746-13-git-send-email-arend@broadcom.com>.
>>>
>>> It has been split up into individual patches. Please test this series
>>> especially if you had issues with the original commit b6fc28a that was
>>> reverted.
>>>
>>> Cc: Jonas Gorski <jogo@openwrt.org>
>>> Cc: David Herrmann <dh.herrmann@gmail.com>
>>> Cc: Maximilian Engelhardt <maxi@daemonizer.de>
>>> Cc: David Costa <david@zarel.net>
>>
>>
>> Is this available in a public branch that I can merge? And what should
>> be used as base? 3.11-rc5? linux-next?
>
>
> Indeed I should have mentioned. It applies on v3.11-rc5 for sure. Did not
> try linux-next.

All 13 patches applied cleanly on top of 3.11-rc5, everything works
fine even after a dozen of reconnects to different networks. No
additional delays.

Consider this whole series:
Tested-by: David Herrmann <dh.herrmann@gmail.com>

card info: Broadcom Corporation BCM4313 802.11b/g/n (0a5c:219c)
(builtin into my old Intel Atom N450 board)
I tested with 802.11g networks. I have only a/g networks here. I don't
know whether that matters.

Cheers
David

Re: [RFT 00/13] brcmsmac: bcm4313 iPA related patches

[Arend van Spriel]

On 08/14/2013 12:33 PM, David Herrmann wrote:
> Hi
>
> On Tue, Aug 13, 2013 at 10:46 PM, Arend van Spriel <arend@broadcom.com> wrote:
>> On 08/13/2013 10:09 PM, David Herrmann wrote:
>>>
>>> Hi
>>>
>>> On Tue, Aug 13, 2013 at 10:03 PM, Arend van Spriel <arend@broadcom.com>
>>> wrote:
>>>>
>>>> This series replaces the patch "[PATCH 12/12] brcmsmac: support 4313iPA"
>>>> with Message-ID: <1376130450-29746-13-git-send-email-arend@broadcom.com>.
>>>>
>>>> It has been split up into individual patches. Please test this series
>>>> especially if you had issues with the original commit b6fc28a that was
>>>> reverted.
>>>>
>>>> Cc: Jonas Gorski <jogo@openwrt.org>
>>>> Cc: David Herrmann <dh.herrmann@gmail.com>
>>>> Cc: Maximilian Engelhardt <maxi@daemonizer.de>
>>>> Cc: David Costa <david@zarel.net>
>>>
>>>
>>> Is this available in a public branch that I can merge? And what should
>>> be used as base? 3.11-rc5? linux-next?
>>
>>
>> Indeed I should have mentioned. It applies on v3.11-rc5 for sure. Did not
>> try linux-next.
>
> All 13 patches applied cleanly on top of 3.11-rc5, everything works
> fine even after a dozen of reconnects to different networks. No
> additional delays.
>
> Consider this whole series:
> Tested-by: David Herrmann <dh.herrmann@gmail.com>
>
> card info: Broadcom Corporation BCM4313 802.11b/g/n (0a5c:219c)
> (builtin into my old Intel Atom N450 board)
> I tested with 802.11g networks. I have only a/g networks here. I don't
> know whether that matters.

As this series modifies the phy code, I would say no.

Thanks for verifying this works for you.

Regards,
Arend

Re: [RFT 00/13] brcmsmac: bcm4313 iPA related patches

[Maximilian Engelhardt]

[-- Attachment #1: Type: text/plain, Size: 1965 bytes --]

On Tuesday 13 August 2013 22:03:27 Arend van Spriel wrote:
> This series replaces the patch "[PATCH 12/12] brcmsmac: support 4313iPA"
> with Message-ID: <1376130450-29746-13-git-send-email-arend@broadcom.com>.
> 
> It has been split up into individual patches. Please test this series
> especially if you had issues with the original commit b6fc28a that was
> reverted.
> 
> Cc: Jonas Gorski <jogo@openwrt.org>
> Cc: David Herrmann <dh.herrmann@gmail.com>
> Cc: Maximilian Engelhardt <maxi@daemonizer.de>
> Cc: David Costa <david@zarel.net>
> 
> Arend van Spriel (13):
>   brcmsmac: cosmetic change in phy_lcn.c
>   brcmsmac: change pa_gain for bcm4313 iPA
>   brcmsmac: use ARRAY_SIZE in phytbl_lcn.c
>   brcmsmac: add switch control table for BCM4313 iPA BT-combo cards
>   brcmsmac: add debug info message providing phy and radio info
>   brcmsmac: update transmit gain table for lcn phy
>   brcmsmac: change lcnphy receive i/q calibration routine
>   brcmsmac: fix TSSI idle estimation
>   brcmsmac: avoid calling set_txpwr_by_index() twice
>   brcmsmac: rework switch control table init including iPA BT-combo
>   brcmsmac: correct phy registers for TSSI-based power control
>   brcmsmac: reinitialize TSSI power control upon channel switch
>   brcmsmac: add support for BCM4313 iPA variant
> 
>  drivers/net/wireless/brcm80211/brcmsmac/main.c     |    4 +-
>  .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |  397
> +++++++++++-------- .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c   | 
> 405 +++++++++++--------- .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h  
> |    1 +
>  4 files changed, 475 insertions(+), 332 deletions(-)

Hello Arend,

I finally had some time to test your patches.

On my hardware I couldn't find any regressions with these patches. I also 
verified that the reception problems I had with my card are fixed by these 
patches.

I did test the patches on top of 3.10.5 as they did apply without any 
problems.

Greetings,
Maxi

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFT 00/13] brcmsmac: bcm4313 iPA related patches

[Arend van Spriel]

On 08/21/13 18:17, Maximilian Engelhardt wrote:
> On Tuesday 13 August 2013 22:03:27 Arend van Spriel wrote:
>> This series replaces the patch "[PATCH 12/12] brcmsmac: support 4313iPA"
>> with Message-ID:<1376130450-29746-13-git-send-email-arend@broadcom.com>.
>>
>> It has been split up into individual patches. Please test this series
>> especially if you had issues with the original commit b6fc28a that was
>> reverted.
>>
>> Cc: Jonas Gorski<jogo@openwrt.org>
>> Cc: David Herrmann<dh.herrmann@gmail.com>
>> Cc: Maximilian Engelhardt<maxi@daemonizer.de>
>> Cc: David Costa<david@zarel.net>
>>
>> Arend van Spriel (13):
>>    brcmsmac: cosmetic change in phy_lcn.c
>>    brcmsmac: change pa_gain for bcm4313 iPA
>>    brcmsmac: use ARRAY_SIZE in phytbl_lcn.c
>>    brcmsmac: add switch control table for BCM4313 iPA BT-combo cards
>>    brcmsmac: add debug info message providing phy and radio info
>>    brcmsmac: update transmit gain table for lcn phy
>>    brcmsmac: change lcnphy receive i/q calibration routine
>>    brcmsmac: fix TSSI idle estimation
>>    brcmsmac: avoid calling set_txpwr_by_index() twice
>>    brcmsmac: rework switch control table init including iPA BT-combo
>>    brcmsmac: correct phy registers for TSSI-based power control
>>    brcmsmac: reinitialize TSSI power control upon channel switch
>>    brcmsmac: add support for BCM4313 iPA variant
>>
>>   drivers/net/wireless/brcm80211/brcmsmac/main.c     |    4 +-
>>   .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |  397
>> +++++++++++-------- .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c   |
>> 405 +++++++++++--------- .../wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h
>> |    1 +
>>   4 files changed, 475 insertions(+), 332 deletions(-)
>
> Hello Arend,
>
> I finally had some time to test your patches.
>
> On my hardware I couldn't find any regressions with these patches. I also
> verified that the reception problems I had with my card are fixed by these
> patches.
>
> I did test the patches on top of 3.10.5 as they did apply without any
> problems.

Appreciated. I did send the patches for wireless-next already, ie. for 
v3.12 kernel. Good to know that they apply to 3.10 as is.

Regards,
Arend

Re: [RFT V2 02/13] brcmsmac: change pa_gain for bcm4313 iPA

[Hauke Mehrtens]

Hi Arend,

when you send a new patch please fix this typo.

Hauke

On 08/13/2013 10:03 PM, Arend van Spriel wrote:
> The function wlc_lcnphy_load_tx_gain_table() has a target PA
> gain specified for the iPA variant of the bcm4313. This gain
> value is reduced to avoid PA distortion. The if-statement is
> removed because it was rather redundant in the first place.
> Please not that this patch does not provide full iPA support.
         ^^^
         note

Re: [RFT V2 02/13] brcmsmac: change pa_gain for bcm4313 iPA

[Arend van Spriel]

On 08/21/2013 09:18 PM, Hauke Mehrtens wrote:
> Hi Arend,
>
> when you send a new patch please fix this typo.

Got it covered already:

http://mid.gmane.org/1377007246-9957-3-git-send-email-arend@broadcom.com

Regards,
Arend

> Hauke
>
> On 08/13/2013 10:03 PM, Arend van Spriel wrote:
>> The function wlc_lcnphy_load_tx_gain_table() has a target PA
>> gain specified for the iPA variant of the bcm4313. This gain
>> value is reduced to avoid PA distortion. The if-statement is
>> removed because it was rather redundant in the first place.
>> Please not that this patch does not provide full iPA support.
>           ^^^
>           note
>
>
>