* Error:ACS not working even after the Makefile and the configuration options are set.
@ 2013-09-05 11:33 Abbas Chunawala
2013-09-05 14:01 ` Jonathan Bither
0 siblings, 1 reply; 2+ messages in thread
From: Abbas Chunawala @ 2013-09-05 11:33 UTC (permalink / raw)
To: linux-wireless
Hi,
Greetings.
No ACS prints.
Instead an error
ath0 : IEEE 802.11 : Fetching channel rate/frequency not supported
The channel variable is set right in the configuration file.
How to get the acs prints.
The command for the hostapd invocation is a s follows:-
hostapd -B /tmp/secath0 -dd -e /etc/wpa2/entropy.
Thanks
Regards
Abbas Chunawala
(System Level Solutions (I) Pvt. Ltd. )
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Error:ACS not working even after the Makefile and the configuration options are set.
2013-09-05 11:33 Error:ACS not working even after the Makefile and the configuration options are set Abbas Chunawala
@ 2013-09-05 14:01 ` Jonathan Bither
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Bither @ 2013-09-05 14:01 UTC (permalink / raw)
To: abbas.chunawala; +Cc: linux-wireless
On 09/05/2013 07:33 AM, Abbas Chunawala wrote:
> Hi,
> Greetings.
>
> No ACS prints.
> Instead an error
> ath0 : IEEE 802.11 : Fetching channel rate/frequency not supported
^ You seem to be using the driver MadWiFi instead of Ath5k based upon
the interface name. MadWiFi is deprecated in support of the Ath5k driver.
You need to blacklist MadWiFi first before loading Ath5k.
> The channel variable is set right in the configuration file.
> How to get the acs prints.
> The command for the hostapd invocation is a s follows:-
> hostapd -B /tmp/secath0 -dd -e /etc/wpa2/entropy.
>
> Thanks
> Regards
> Abbas Chunawala
> (System Level Solutions (I) Pvt. Ltd. )
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-09-05 14:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-05 11:33 Error:ACS not working even after the Makefile and the configuration options are set Abbas Chunawala
2013-09-05 14:01 ` Jonathan Bither
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).