WIFI P2P ping doesn't work.

WIFI P2P ping doesn't work.

[Matt Chen]

Hi list,

I am running the v3.12-rc3 and using Atheros AR9485 with ath9k. My
wpa_supplicant is from git://w1.fi/srv/git/hostap.git in master branch
with most recent commit.

The my_p2p_supplicant.conf for my wpa_supplicant is :
=======================================
ctrl=/var/run/wpa_supplicant
update_config=1

device_name=HP GO
device_type=1-0050F204-2

p2p_go_ht40=1

=========================================

I run "wpa_supplicant -i wlan0 -f my_p2p_supplicant.conf -Dnl80211
-ddt -f /var/log/wpa_supplicant -B

I use wpa_cli to work on P2P. So here goes my case:

M#1
p2p_find
p2p_stop
p2p_peers
p2p_connect [M#2 MAC ADDRESS] pbc go_intent=7

M#2
p2p_find
p2p_stop
p2p_peers
p2p_connect [M#1 MAC ADDRESS] pbc


Then I can find the M#1 become the P0 GO mode and M#2 become station
mode. And each status is completed. But after that, I set each machine
with a static IP such as 192.168.5.10 and 192.168.5.11 manually. I am
not able to ping each IP.

Is there anything I am doing wrong ?

Thank you.

Re: WIFI P2P ping doesn't work.

[Matt Chen]

No one has any suggestion and comment ?

2013/10/8 Matt Chen <machen@suse.com>:
> Hi list,
>
> I am running the v3.12-rc3 and using Atheros AR9485 with ath9k. My
> wpa_supplicant is from git://w1.fi/srv/git/hostap.git in master branch
> with most recent commit.
>
> The my_p2p_supplicant.conf for my wpa_supplicant is :
> =======================================
> ctrl=/var/run/wpa_supplicant
> update_config=1
>
> device_name=HP GO
> device_type=1-0050F204-2
>
> p2p_go_ht40=1
>
> =========================================
>
> I run "wpa_supplicant -i wlan0 -f my_p2p_supplicant.conf -Dnl80211
> -ddt -f /var/log/wpa_supplicant -B
>
> I use wpa_cli to work on P2P. So here goes my case:
>
> M#1
> p2p_find
> p2p_stop
> p2p_peers
> p2p_connect [M#2 MAC ADDRESS] pbc go_intent=7
>
> M#2
> p2p_find
> p2p_stop
> p2p_peers
> p2p_connect [M#1 MAC ADDRESS] pbc
>
>
> Then I can find the M#1 become the P0 GO mode and M#2 become station
> mode. And each status is completed. But after that, I set each machine
> with a static IP such as 192.168.5.10 and 192.168.5.11 manually. I am
> not able to ping each IP.
>
> Is there anything I am doing wrong ?
>
> Thank you.

Re: WIFI P2P ping doesn't work.

[Oleksij Rempel]

Hi Matt,

no suggestions. I was able to reproduce same issue yesterday on
ath9k_htc. But currently no time to digg in it.


Am 08.10.2013 17:41, schrieb Matt Chen:
> No one has any suggestion and comment ?
> 
> 2013/10/8 Matt Chen <machen@suse.com>:
>> Hi list,
>>
>> I am running the v3.12-rc3 and using Atheros AR9485 with ath9k. My
>> wpa_supplicant is from git://w1.fi/srv/git/hostap.git in master branch
>> with most recent commit.
>>
>> The my_p2p_supplicant.conf for my wpa_supplicant is :
>> =======================================
>> ctrl=/var/run/wpa_supplicant
>> update_config=1
>>
>> device_name=HP GO
>> device_type=1-0050F204-2
>>
>> p2p_go_ht40=1
>>
>> =========================================
>>
>> I run "wpa_supplicant -i wlan0 -f my_p2p_supplicant.conf -Dnl80211
>> -ddt -f /var/log/wpa_supplicant -B
>>
>> I use wpa_cli to work on P2P. So here goes my case:
>>
>> M#1
>> p2p_find
>> p2p_stop
>> p2p_peers
>> p2p_connect [M#2 MAC ADDRESS] pbc go_intent=7
>>
>> M#2
>> p2p_find
>> p2p_stop
>> p2p_peers
>> p2p_connect [M#1 MAC ADDRESS] pbc
>>
>>
>> Then I can find the M#1 become the P0 GO mode and M#2 become station
>> mode. And each status is completed. But after that, I set each machine
>> with a static IP such as 192.168.5.10 and 192.168.5.11 manually. I am
>> not able to ping each IP.
>>
>> Is there anything I am doing wrong ?
>>
>> Thank you.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


-- 
Regards,
Oleksij

Re: WIFI P2P ping doesn't work.

[Matt Chen]

Hi Oleksij,

Thanks for the info anyway. :)

2013/10/8 Oleksij Rempel <linux@rempel-privat.de>:
> Hi Matt,
>
> no suggestions. I was able to reproduce same issue yesterday on
> ath9k_htc. But currently no time to digg in it.
>
>
> Am 08.10.2013 17:41, schrieb Matt Chen:
>> No one has any suggestion and comment ?
>>
>> 2013/10/8 Matt Chen <machen@suse.com>:
>>> Hi list,
>>>
>>> I am running the v3.12-rc3 and using Atheros AR9485 with ath9k. My
>>> wpa_supplicant is from git://w1.fi/srv/git/hostap.git in master branch
>>> with most recent commit.
>>>
>>> The my_p2p_supplicant.conf for my wpa_supplicant is :
>>> =======================================
>>> ctrl=/var/run/wpa_supplicant
>>> update_config=1
>>>
>>> device_name=HP GO
>>> device_type=1-0050F204-2
>>>
>>> p2p_go_ht40=1
>>>
>>> =========================================
>>>
>>> I run "wpa_supplicant -i wlan0 -f my_p2p_supplicant.conf -Dnl80211
>>> -ddt -f /var/log/wpa_supplicant -B
>>>
>>> I use wpa_cli to work on P2P. So here goes my case:
>>>
>>> M#1
>>> p2p_find
>>> p2p_stop
>>> p2p_peers
>>> p2p_connect [M#2 MAC ADDRESS] pbc go_intent=7
>>>
>>> M#2
>>> p2p_find
>>> p2p_stop
>>> p2p_peers
>>> p2p_connect [M#1 MAC ADDRESS] pbc
>>>
>>>
>>> Then I can find the M#1 become the P0 GO mode and M#2 become station
>>> mode. And each status is completed. But after that, I set each machine
>>> with a static IP such as 192.168.5.10 and 192.168.5.11 manually. I am
>>> not able to ping each IP.
>>>
>>> Is there anything I am doing wrong ?
>>>
>>> Thank you.
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
>
> --
> Regards,
> Oleksij
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>