linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Yannik Völker" <yannikv@yahoo.de>
To: Oleksij Rempel <linux@rempel-privat.de>
Cc: Pontus Fuchs <pontus.fuchs@gmail.com>, linux-wireless@vger.kernel.org
Subject: Re: ar5523 Gigaset USB Adapter 108 issue
Date: Fri, 18 Oct 2013 18:33:49 +0200	[thread overview]
Message-ID: <526162ED.8030901@yahoo.de> (raw)
In-Reply-To: <52615EFA.80902@rempel-privat.de>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am 18.10.2013 18:16, schrieb Oleksij Rempel:
> Am 18.10.2013 17:38, schrieb Yannik Völker:
>> Am 18.10.2013 17:07, schrieb Oleksij Rempel:
>>> Am 18.10.2013 16:49, schrieb Alan Stern:
>>>> Yannik, you should always use Reply-To-All so that your
>>>> messages get sent to the mailing list and not just to me.
>>>> 
>>>> On Thu, 17 Oct 2013, Yannik Völker wrote:
>>>> 
>>>>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>>>>> Please post two usbmon traces, one showing the failure
>>>>>> on your current system and the other showing the adapter
>>>>>> running correctly under a 32-bit kernel.  Instructions
>>>>>> for usbmon are in the kernel source file
>>>>>> Documentation/usb/usbmon.txt.
>>>>> I never got it to work under a 32-bit kernel, i was just
>>>>> able to utilize a windows32 driver using ndiswrapper.
>>>>> 
>>>>> Now i got it to "work". I randomly found out that the
>>>>> ar5523 driver actually works when you load it after you
>>>>> unload ndiswrapper so the following steps make it work: 1.
>>>>> modprobe ndiswrapper 2. plug in device 3. connect to wlan
>>>>> using ndiswrapper and disconnect again (might be optional)
>>>>> 4. modprobe -r ndiswrapper 5. modprobe ar5523 6. connect to
>>>>> wlan log for that is attatched as wlanthennative2.log
>> 
>> 
>>> It sounds like linux driver didn't recognised usb id and
>>> didn't uploaded firmware, or there was no firmware to upload.
>> there is firmware (/lib/firmware/ar5523.bin exists) but it does
>> not even get touched (i renamed the file and the error did not
>> change at all)
> 
> find first usbid of your adapter (it will be changed after
> firmware upload). And try to force driver to use this id: modprobe
> -v ar5523 echo 07d1 3a0d > /sys/bus/usb/drivers/ar5523/new_id
> 
> instead of "07d1 3a0d" use your id.
> 

# lsusb
…
Bus 003 Device 011: ID 129b:160c CyberTAN Technology Siemens
S30853-S1038-R351 802.11g Wireless Adapter [Atheros AR5523]
…

# modprobe ar5523
# echo 129b 160c > /sys/bus/usb/drivers/ar5523/new_id
<plugging device in>
syslog:
Oct 18 18:27:47 yannik-desktop kernel: [ 8751.447784] usbcore:
registered new interface driver ar5523
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.036912] usb 3-14: new
high-speed USB device number 12 using xhci_hcd
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.053995] usb 3-14: New
USB device found, idVendor=129b, idProduct=160c
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054005] usb 3-14: New
USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054010] usb 3-14:
Product: AR5523
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054015] usb 3-14:
Manufacturer: Atheros Communications Inc
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054019] usb 3-14:
SerialNumber: 1.0
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052313] usb 3-14:
timeout waiting for command 01 reply
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052323] usb 3-14: could
not initialize adapter
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052359] usb 3-14: RX USB
error -2.
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052378] usb 3-14: error
- -1 when submitting rx urb
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052504] ar5523: probe of
3-14:1.0 failed with error -110

> Besidy, what kernel version are you using? May be it is too old..
> 
3.11.0-12-generic
it is my understanding that the ar5523 driver was included from 3.8 on.
- -- 
Yannik Völker
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
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=pzyI
-----END PGP SIGNATURE-----

  reply	other threads:[~2013-10-18 16:33 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <526020B6.7080601@yahoo.de>
2013-10-18 14:49 ` ar5523 Gigaset USB Adapter 108 issue Alan Stern
2013-10-18 15:07   ` Oleksij Rempel
2013-10-18 15:38     ` Yannik Völker
2013-10-18 16:16       ` Oleksij Rempel
2013-10-18 16:33         ` Yannik Völker [this message]
2013-10-18 17:16           ` Oleksij Rempel
2013-10-19 12:18             ` Yannik Völker
2013-10-19 15:30               ` Oleksij Rempel
2013-10-19 23:53               ` Stefan Lippers-Hollmann
     [not found]               ` <5262BA7A.2050803@rempel-privat.de>
     [not found]                 ` <5266C4C1.80408@yahoo.de>
2013-10-22 18:45                   ` Oleksij Rempel
2013-10-24 12:46                     ` Yannik Völker
2013-10-25 10:31                       ` Pontus Fuchs

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=526162ED.8030901@yahoo.de \
    --to=yannikv@yahoo.de \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=pontus.fuchs@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).