From: Emmanuel Grumbach <egrumbach@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: pull request: iwlwifi 2013-11-19
Date: Mon, 25 Nov 2013 23:05:57 +0200 [thread overview]
Message-ID: <5293BBB5.80302@gmail.com> (raw)
In-Reply-To: <20131125204113.GC8228@tuxdriver.com>
[-- Attachment #1: Type: text/plain, Size: 3810 bytes --]
On 11/25/2013 10:41 PM, John W. Linville wrote:
> On Sun, Nov 24, 2013 at 07:04:36PM +0200, Emmanuel Grumbach wrote:
>>
>>
>> On 11/19/2013 10:49 PM, Emmanuel Grumbach wrote:
>>> Hi John,
>>>
>>> This is a pull request for 3.13.
>>>
>>> I have here a few fixes for BT Coex. One of them is a NULL pointer
>>> dereference. Another one avoids to enable a feature that can make the
>>> firmware unhappy since the firmware isn't ready for it yet. WE also
>>> avoid a WARNING that can be triggered upon association in not-so-bad
>>> cases even if the association succeeded. We add support for new NICs
>>> (not yet on the market) and bump the API so that 3.13 will be able to
>>> work with the new firmware that will be out soon hopefully.
>>> I also have a boundary check from Johannes.
>>>
>>> I reset my tree to wireless/master as the time of this writing. I did
>>> that mainly because I needed the changes that were in -next before 3.12
>>> went out even if 3.13-rc1 isn't out yet. I plan to rebase my tree on
>>> 3.13-rc2 (or 3.13-rc1 if this pull request makes it to 3.13-rc1 but that
>>> seems unlikely).
>>> Tell me if you have any issues.
>>>
>>>
>>
>> FWIW - since 3.13-rc1 is already out and you haven't pulled yet, I
>> rebased this pull request --onto v3.13-rc1.
>
> 3.13-rc1 is not in the wireless tree (because it isn't in the net
> tree). If it is in your tree, then I can't pull from you -- sorry!
>
Sure - sorry... still starting with all this...
Anyway - I rebased my tree on yours - so here is a new pull request.
Can you please make sure you pull -no-ff?
It makes it easier for people to see when you pull from others rather
than apply patches.
Thanks!
The following changes since commit 9d8506cc2d7ea1f911c72c100193a3677f6668c3:
gso: handle new frag_list of frags GRO packets (2013-11-21 14:11:50 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes.git
master
for you to fetch changes up to 3c5da7eefce5835acfc73ebd0a4f961cdae4ae67:
iwlwifi: mvm: use a cast to calculate the last seqno from the next one
(2013-11-25 23:00:21 +0200)
----------------------------------------------------------------
Alexander Bondar (1):
iwlwifi: pcie: stop sending commands to dead firmware
Emmanuel Grumbach (5):
iwlwifi: pcie: fix interrupt coalescing for 7260 / 3160
iwlwifi: mvm: BT Coex - don't enable MULTI_PRIO_LUT
iwlwifi: mvm: BT Coex fix another NULL pointer dereference
iwlwifi: mvm: don't WARN about unsuccessful time event
iwlwifi: bump required firmware API version for 3160/7260
Johannes Berg (1):
iwlwifi: mvm: check sta_id/drain values in debugfs
Luciano Coelho (2):
iwlwifi: mvm: set seqno also when no keys are set
iwlwifi: mvm: use a cast to calculate the last seqno from the next one
Oren Givon (1):
iwlwifi: add new HW - 7265 series
drivers/net/wireless/iwlwifi/iwl-7000.c | 29
+++++++++++++++++++++++--
drivers/net/wireless/iwlwifi/iwl-config.h | 5 +++++
drivers/net/wireless/iwlwifi/iwl-csr.h | 5 +----
drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 6 ++++-
drivers/net/wireless/iwlwifi/mvm/d3.c | 5 +++--
drivers/net/wireless/iwlwifi/mvm/debugfs.c | 4 ++++
drivers/net/wireless/iwlwifi/mvm/time-event.c | 7 ++++--
drivers/net/wireless/iwlwifi/pcie/drv.c | 21 ++++++++++++++++++
drivers/net/wireless/iwlwifi/pcie/internal.h | 8 +++++++
drivers/net/wireless/iwlwifi/pcie/rx.c | 7 +++++-
drivers/net/wireless/iwlwifi/pcie/trans.c | 3 ---
drivers/net/wireless/iwlwifi/pcie/tx.c | 6 ++---
12 files changed, 88 insertions(+), 18 deletions(-)
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-11-25 21:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-19 20:49 pull request: iwlwifi 2013-11-19 Emmanuel Grumbach
2013-11-19 20:52 ` [PATCH 1/7] iwlwifi: mvm: check sta_id/drain values in debugfs Emmanuel Grumbach
2013-11-19 20:52 ` [PATCH 2/7] iwlwifi: pcie: refactor a bit the interrupt coalescing Emmanuel Grumbach
2013-11-19 20:52 ` [PATCH 3/7] iwlwifi: add new HW - 7265 series Emmanuel Grumbach
2013-11-19 20:52 ` [PATCH 4/7] iwlwifi: mvm: BT Coex - don't enable MULTI_PRIO_LUT Emmanuel Grumbach
2013-11-19 20:52 ` [PATCH 5/7] iwlwifi: mvm: BT Coex fix another NULL pointer dereference Emmanuel Grumbach
2013-11-19 20:52 ` [PATCH 6/7] iwlwifi: mvm: don't WARN about unsuccessful time event Emmanuel Grumbach
2013-11-19 20:52 ` [PATCH 7/7] iwlwifi: bump required firmware API version for 3160/7260 Emmanuel Grumbach
2013-11-24 17:04 ` pull request: iwlwifi 2013-11-19 Emmanuel Grumbach
2013-11-25 20:41 ` John W. Linville
2013-11-25 21:05 ` Emmanuel Grumbach [this message]
2013-12-02 17:58 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5293BBB5.80302@gmail.com \
--to=egrumbach@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).