From: zhuyj <zyjzyj2000@gmail.com>
To: Krishna Chaitanya <chaitanya.mgit@gmail.com>,
"Liu, Bopeng" <Bopeng.Liu@windriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: Re: 802.11a is supported in AP mode or not?
Date: Thu, 23 Jan 2014 14:44:16 +0800 [thread overview]
Message-ID: <52E0BA40.7090203@gmail.com> (raw)
In-Reply-To: <CABPxzY+URNQRYTteZjbEKAD45Y5QBvtYqx20dM8MqFsaueHSPw@mail.gmail.com>
On 01/23/2014 02:15 PM, Krishna Chaitanya wrote:
> hostapd -dd -B /etc/hostapd.conf
root@wind-desktop:~# hostapd -dd -B /etc/hostapd.conf
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd.conf
ctrl_interface_group=0
nl80211: interface wlan0 in phy phy0
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
nl80211: Using driver-based off-channel TX
nl80211: Register frame command failed (type=208): ret=-114 (Operation
already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Failed to register Action frame processing - ignore for now
nl80211: Add own interface ifindex 3
nl80211: Set mode ifindex 3 iftype 3 (AP)
nl80211: Create interface iftype 6 (MONITOR)
nl80211: New interface mon.wlan0 created: ifindex=4
nl80211: Add own interface ifindex 4
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz
nl80211: 2457-2482 @ 40 MHz
nl80211: 2474-2494 @ 20 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=15 dBm
wlan0: IEEE 802.11 Configured channel (1) not found from the channel
list of current mode (2) IEEE 802.11a
wlan0: IEEE 802.11 Hardware does not support configured channel
Could not select hw_mode and channel. (-4)
wlan0: Unable to setup interface.
Flushing old station entries
Deauthenticate all stations
rmdir[ctrl_interface]: No such file or directory
nl80211: Remove interface ifindex=4
netlink: Operstate: linkmode=0, operstate=6
nl80211: Set mode ifindex 3 iftype 2 (STATION)
root@wind-desktop:~#
root@wind-desktop:~# hostapd -v
hostapd v1.0
User space daemon for IEEE 802.11 AP management,
IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
Copyright (c) 2002-2012, Jouni Malinen <j@w1.fi> and contributors
next prev parent reply other threads:[~2014-01-23 6:44 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-22 9:50 802.11a is supported in AP mode or not? zhuyj
2014-01-22 10:33 ` zhuyj
2014-01-22 10:47 ` Liu, Bopeng
2014-01-22 14:51 ` Pat Erley
2014-01-22 21:20 ` Krishna Chaitanya
2014-01-23 2:00 ` Liu, Bopeng
2014-01-23 6:15 ` Krishna Chaitanya
2014-01-23 6:37 ` Liu, Bopeng
2014-01-23 6:44 ` zhuyj [this message]
2014-01-23 8:23 ` Emmanuel Grumbach
2014-01-23 8:36 ` Liu, Bopeng
2014-01-23 8:41 ` Liu, Bopeng
2014-01-23 8:50 ` zhuyj
2014-01-23 8:57 ` Krishna Chaitanya
2014-01-23 8:59 ` Liu, Bopeng
2014-01-23 9:04 ` Krishna Chaitanya
2014-01-23 9:07 ` Liu, Bopeng
2014-01-23 9:20 ` Liu, Bopeng
2014-01-23 9:21 ` Liu, Bopeng
2014-01-23 9:27 ` Emmanuel Grumbach
2014-01-23 9:29 ` Krishna Chaitanya
2014-01-23 9:34 ` Liu, Bopeng
2014-01-23 9:36 ` Liu, Bopeng
2014-01-23 9:49 ` Emmanuel Grumbach
2014-01-24 5:27 ` Liu, Bopeng
2014-01-27 21:21 ` Anand Moon
2014-01-27 21:59 ` Anand Moon
2014-01-24 6:26 ` Liu, Bopeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E0BA40.7090203@gmail.com \
--to=zyjzyj2000@gmail.com \
--cc=Bopeng.Liu@windriver.com \
--cc=chaitanya.mgit@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).