From: Zhao Hongjiang <zhaohongjiang@huawei.com>
To: <linux-wireless@vger.kernel.org>
Cc: <zhousiyi@huawei.com>
Subject: Get multiple ip addresses by dhcp for wireless card
Date: Thu, 23 Jan 2014 17:48:54 +0800 [thread overview]
Message-ID: <52E0E586.7050806@huawei.com> (raw)
Hello,
Is it possible for one station to get multiple ip addresses from AP/Wireless
router by dhcp? I had tried to add one or more virtual interface for
phy0 (wlan0, wlan1, wlan2,etc), but only wlan0 can get ip address from AP.
the following is the steps:
/bin/wpa_supplicant -ddd -iwlan0 -Dnl80211 -c/wifi/wpa_supplicant.conf -B
/bin/wpa_cli -i wlan0 -p /wlan0
>add_network
>set_network 0 ssid "APabc"
>set_network 0 psk "1111111"
>enable_network 0
iw wlan0 interface add wlan1 type station 4addr on
ip link set wlan1 up
dhcpcd -ABKL wlan0 #works, can get ip
dhcpcd -ABKL wlan1 #cannot work
next reply other threads:[~2014-01-23 9:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-23 9:48 Zhao Hongjiang [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-02-10 3:56 Get multiple ip addresses by dhcp for wireless card Zhao Hongjiang
2014-02-10 6:47 ` Ben Greear
2014-02-10 8:38 ` Zhao Hongjiang
2014-02-10 19:20 ` Ben Greear
2014-02-11 3:53 ` Zhao Hongjiang
2014-02-11 3:57 ` Ben Greear
2014-02-11 12:51 ` Arend van Spriel
2014-02-12 3:22 ` Zhao Hongjiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E0E586.7050806@huawei.com \
--to=zhaohongjiang@huawei.com \
--cc=linux-wireless@vger.kernel.org \
--cc=zhousiyi@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).