* Ath10k throughput report with up to 32 stations.
@ 2014-02-27 20:18 Ben Greear
0 siblings, 0 replies; only message in thread
From: Ben Greear @ 2014-02-27 20:18 UTC (permalink / raw)
To: ath10k, linux-wireless@vger.kernel.org
With the msdu chaining patch I just posted, I am finally getting
decent throughput when using up to 32 station vifs.
I'm hoping I can optimize things better, and I need to get things like tx/rx
train rate reporting working for the station vifs, but I figure these graphs
might be interesting to people.
Basically, the AP is stock firmware and kernel, clients are my modified
firmware and ath10k is patched a bit as well. All 32 stations are running
on a single NIC in the station machine. NICs are WLE900VX.
Single station throughput is not on this graph, but it is around 375-400Mbps.
http://www.candelatech.com/examples/wifi-capacity-32-ath10k-tcp-open-ota/
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-02-27 20:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-27 20:18 Ath10k throughput report with up to 32 stations Ben Greear
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).