Question on regulatory settings.

[Ben Greear <greearb@candelatech.com>]

Hello!

I'm having issues where when we add several ath10k NICs to a system,
the regulatory domain goes quite restricted..  There is an ath9k NIC
with eeprom over-ride hack, and user-space sets regdomain to 'US'.

Later, when registering ath10k, at least one of those NICs registeres
as 'TW'.  The ending domain looks like this:

[root@lf1011-13060017 ~]# iw reg get
country 98: DFS-UNSET
	(2402 - 2472 @ 40), (N/A, 30)
	(5270 - 5330 @ 40), (N/A, 17), DFS
	(5735 - 5835 @ 80), (N/A, 30)


I tried adding a hack to ath10k to zero out the ar->ath_common.regulatory.current_rd,
but in fact it seems to be reported as zero to begin with.

I am obviously missing something.  Either my hacks to ath10k are not
sufficient, or possibly the system is getting regulatory info from
somewhere else?

Any ideas where else it might be getting the idea it should be in TW
domain?  Can it get this from beacons from other systems?

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com