From: "André Valentin" <avalentin@marcant.net>
To: linux-wireless@vger.kernel.org
Subject: Re: ath10k OTP loading issues
Date: Fri, 27 Jun 2014 13:01:43 +0200 [thread overview]
Message-ID: <53AD4F17.6070604@marcant.net> (raw)
In-Reply-To: <53AD2EEE.4040704@marcant.net>
Hi Again!
I just saw the old thread about the same point. So I'm trying to look in the flash of my router if the OTP is stored there.
Does this OTP have some kind of magic so I can identify it?
André
On 27.06.2014 10:44, André Valentin wrote:
> Hi!
>
> I got problems initializing my ath10k PCI card in my Zyxel NBG 6716. It worked until some weeks, now, the driver does not load. I debugged a bit and this is what I got:
> Fri Jun 27 08:03:42 2014 kern.info kernel: [62908.290000] ath10k_pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
> Fri Jun 27 08:03:43 2014 kern.info kernel: [62908.610000] ath10k: pci irq legacy irq_mode 0 reset_mode 0
> Fri Jun 27 08:03:43 2014 kern.err kernel: [62908.620000] ath10k: boot upload otp to 0x1234 len 6917
> Fri Jun 27 08:03:43 2014 kern.err kernel: [62908.780000] ath10k: otp calibration failed: 2
> Fri Jun 27 08:03:43 2014 kern.err kernel: [62908.790000] ath10k: failed to run otp: -22
> Fri Jun 27 08:03:43 2014 kern.err kernel: [62908.790000] ath10k: could not init core (-22)
> Fri Jun 27 08:03:43 2014 kern.err kernel: [62909.060000] ath10k: could not probe fw (-22)
> Fri Jun 27 08:03:43 2014 kern.err kernel: [62909.060000] ath10k: failed to register driver core: -22
> Fri Jun 27 08:03:43 2014 kern.warn kernel: [62909.060000] ath10k_pci: probe of 0000:01:00.0 failed with error -22
>
>
> If I remove OTP loading the card initializes fine, but I think I will not have a good performance. So bad idea.
> Currently I use compat-wireless-2014-05-22, with some patches form openwrt.
> The firmware-2.bin has been checked, it is the same as offered here:
> https://github.com/kvalo/ath10k-firmware
>
> Perhaps somebody has a hint for me?
>
> Kind regards,
>
> André
>
next prev parent reply other threads:[~2014-06-27 11:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-27 8:44 ath10k OTP loading issues André Valentin
2014-06-27 11:01 ` André Valentin [this message]
2014-07-02 8:13 ` Kalle Valo
2014-07-02 8:34 ` André Valentin
2014-07-02 8:56 ` Kalle Valo
2014-07-02 8:10 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53AD4F17.6070604@marcant.net \
--to=avalentin@marcant.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).