##### hostapd configuration file, generated by rdb-manager ####################
# This is derrived from the hostapd.conf file under gnu_apps/hostapd, which
# contains extensive documentation which was stripped out for this file.

interface=wlan0

bridge=br0

driver=nl80211

logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2

ctrl_interface=/var/run/hostapd
ctrl_interface_group=0

ssid2="NetComm 2938"
country_code=AU
hw_mode=g
channel=1
ap_max_inactivity=300
beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
auth_algs=1
ignore_broadcast_ssid=0

wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0


disassoc_low_ack=0
max_listen_interval=500

ap_isolate=0

ieee80211n=1
# ht_capab=[HT40+][HT40-][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC12]
# adding HT40+ or HT40- limits the number of available channels to either 1-9 or 5-13
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC12]
# Feature requires a patch (gnu_apps/hostapd/patches)
noscan=1

eapol_key_index_workaround=0

eap_server=0

own_ip_addr=127.0.0.1

wpa=2
wpa_passphrase=abcdefgh
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
wpa_group_rekey=600
rsn_preauth=0

bss=wlan2
bridge=br0
bssid=00:60:64:E0:20:4B
ssid=Sourav2
auth_algs=1
driver=nl80211
ignore_broadcast_ssid=0
auth_server_addr=0.0.0.0
auth_server_port=1812
auth_server_shared_secret=NetComm
rsn_preauth=0
wpa_passphrase=a1b2c3d4e5
wpa=2
wpa_pairwise=CCMP
wpa_group_rekey=600
wpa_key_mgmt=WPA-PSK
eapol_key_index_workaround=0

eap_server=0

own_ip_addr=127.0.0.1

bss=wlan3
bridge=br0
bssid=00:60:64:E0:20:4C
ssid=Sourav3
auth_algs=1
driver=nl80211
ignore_broadcast_ssid=0
auth_server_addr=0.0.0.0
auth_server_port=1812
auth_server_shared_secret=NetComm
rsn_preauth=0
wpa_passphrase=a1b2c3d4e5
wpa=2
wpa_pairwise=CCMP
wpa_group_rekey=600
wpa_key_mgmt=WPA-PSK
eapol_key_index_workaround=0

eap_server=0

own_ip_addr=127.0.0.1

bss=wlan4
bridge=br0
bssid=00:60:64:E0:20:4D
ssid=Sourav4
auth_algs=1
driver=nl80211
ignore_broadcast_ssid=0
auth_server_addr=0.0.0.0
auth_server_port=1812
auth_server_shared_secret=NetComm
rsn_preauth=0
wpa_passphrase=a1b2c3d4e5
wpa=2
wpa_pairwise=CCMP
wpa_group_rekey=600
wpa_key_mgmt=WPA-PSK
eapol_key_index_workaround=0

eap_server=0

own_ip_addr=127.0.0.1