From: Ben Greear <greearb@candelatech.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: What does it take to enable channel 100?
Date: Wed, 24 Sep 2014 10:45:36 -0700 [thread overview]
Message-ID: <54230340.8090604@candelatech.com> (raw)
My system should be doing DFS properly, but channel 100 (5500 Mhz) and nearby are still not
enabled. What extra do I need to do?
I have some hacks to enable DFS-FCC, which fixes at least some of the DFS
problems in upstream kernels, and regulatory.bin is only a few months old.
[root@ath10k-2220 wifi]# iw reg get
country US: DFS-FCC
(2402 - 2472 @ 40), (N/A, 30)
(5170 - 5250 @ 80), (N/A, 17)
(5250 - 5330 @ 80), (N/A, 23), DFS
(5735 - 5835 @ 80), (N/A, 30)
(57240 - 63720 @ 2160), (N/A, 40)
Sep 24 09:19:35 localhost kernel: cfg80211: set-regdom, lr->initiator: 0 domain: 00
Sep 24 09:19:35 localhost kernel: cfg80211: Regulatory domain (set-regdom): 00 DFS: unset
Sep 24 09:19:35 localhost kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sep 24 09:19:35 localhost kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sep 24 09:19:35 localhost kernel: cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sep 24 09:19:35 localhost kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: Done with reg domain
Sep 24 09:19:35 localhost kernel:
Sep 24 09:19:35 localhost kernel: cfg80211: World regulatory domain updated:
Sep 24 09:19:35 localhost kernel: cfg80211: DFS Master region: unset
Sep 24 09:19:35 localhost kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sep 24 09:19:35 localhost kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sep 24 09:19:35 localhost kernel: cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sep 24 09:19:35 localhost kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sep 24 09:19:35 localhost kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
....
Sep 24 09:19:36 localhost kernel: cfg80211: Calling CRDA for country: US
Sep 24 09:19:36 localhost kernel: cfg80211: set-regdom, lr->initiator: 2 domain: US
Sep 24 09:19:36 localhost kernel: cfg80211: Forcing US to DFS-FCC (was: unset).
Sep 24 09:19:36 localhost kernel: cfg80211: Regulatory domain (set-regdom): US DFS: FCC
Sep 24 09:19:36 localhost kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sep 24 09:19:36 localhost kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Sep 24 09:19:36 localhost kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Sep 24 09:19:36 localhost kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Sep 24 09:19:36 localhost kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Sep 24 09:19:36 localhost kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Sep 24 09:19:36 localhost kernel: cfg80211: Done with reg domain
Sep 24 09:19:36 localhost kernel:
Sep 24 09:19:36 localhost kernel: cfg80211: set-rd-driver, no intersect requested.
Sep 24 09:19:36 localhost kernel: cfg80211: Setting DFS Master region in update_regulatory, was: unset, new: FCC lr: ffff880037913000 regdom: ffff8800c72a6300
Sep 24 09:19:36 localhost kernel: cfg80211: Regulatory domain changed to country: US
Sep 24 09:19:36 localhost kernel: cfg80211: DFS Master region: FCC
Sep 24 09:19:36 localhost kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sep 24 09:19:36 localhost kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Sep 24 09:19:36 localhost kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Sep 24 09:19:36 localhost kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Sep 24 09:19:36 localhost kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Sep 24 09:19:36 localhost kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Sep 24 09:19:37 localhost kernel: cfg80211: Setting DFS Master region in update_regulatory, was: FCC, new: FCC lr: ffff880037913000 regdom: ffff8800c72a6300
Sep 24 09:19:37 localhost kernel: cfg80211: Setting DFS Master region in update_regulatory, was: unset, new: FCC lr: ffff8802208ba280 regdom: ffff8800c72a6300
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
reply other threads:[~2014-09-24 17:45 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54230340.8090604@candelatech.com \
--to=greearb@candelatech.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).