Re: [PATCH] ath10k: Fix tx status flag setting for management frames

[Rakesh Pillai <pillair@codeaurora.org>]

Hi All,

Please ignore this patchset. I have added the Tested HW/FW info and sent 
the v2 version for this patchset.

Thanks,
Rakesh Pillai.

On 2018-09-06 18:50, Rakesh Pillai wrote:
> The tx_status for management frames is being filled
> incorrectly in the flags of skb_cb. This incorrect
> flag setting causes the upper layers to consider that
> the particular frame was not transmitted properly,
> leading to improper behavior.
> 
> Set the IEEE80211_TX_STAT_ACK flag in the info flags
> of skb_cb, to indicate the successful transmission of
> the management frame.
> 
> Fixes: dc405152bb64d4ae01c9ac669de25b2d1fb6fc2d
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
>  drivers/net/wireless/ath/ath10k/wmi.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/ath/ath10k/wmi.c
> b/drivers/net/wireless/ath/ath10k/wmi.c
> index fd612d2..1dced0d 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi.c
> +++ b/drivers/net/wireless/ath/ath10k/wmi.c
> @@ -2336,7 +2336,12 @@ static int wmi_process_mgmt_tx_comp(struct
> ath10k *ar, u32 desc_id,
>  	dma_unmap_single(ar->dev, pkt_addr->paddr,
>  			 msdu->len, DMA_FROM_DEVICE);
>  	info = IEEE80211_SKB_CB(msdu);
> -	info->flags |= status;
> +
> +	if (status)
> +		info->flags &= ~IEEE80211_TX_STAT_ACK;
> +	else
> +		info->flags |= IEEE80211_TX_STAT_ACK;
> +
>  	ieee80211_tx_status_irqsafe(ar->hw, msdu);
> 
>  	ret = 0;