From: poma <pomidorabelisima@gmail.com>
To: Dan Williams <dcbw@redhat.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>,
Joshua Roys <Joshua.Roys@gtri.gatech.edu>,
Network Manager <networkmanager-list@gnome.org>,
Larry Finger <Larry.Finger@lwfinger.net>,
lizhaoming <chaoming_li@realsil.com.cn>,
Realtek WlanFAE <wlanfae@realtek.com>,
linux-wireless@vger.kernel.org
Subject: Re: RTL8188SU(rtl8192su) & rtl8192sufw-ap.bin
Date: Wed, 15 Oct 2014 04:20:48 +0200 [thread overview]
Message-ID: <543DDA00.9090709@gmail.com> (raw)
In-Reply-To: <1413318147.22440.39.camel@dcbw.local>
On 14.10.2014 22:22, Dan Williams wrote:
> On Tue, 2014-10-14 at 02:59 +0200, poma wrote:
>> Realtek RTL8188SU/RTL8191SU/RTL8192SU driver
>> https://github.com/chunkeey/rtl8192su
>> &
>> RTL8188SU
>>
>
> It looks like everything worked correctly here for AP mode, at least
> from the NM logs. Is that correct?
>
> Dan
>
If you don't hit something like this
[ 19.021232] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
[ 19.304159] rtl8192s_common: Chip version 0x3
[ 19.472156] rtl_usb: rx_max_size 9100, rx_urb_num 8, in_ep 3
[ 19.472765] BUG: unable to handle kernel paging request at ffff8800c8f3a3cc
[ 19.473348] IP: [<ffffffffa0501d5e>] rtl_usb_probe+0x64e/0x8f0 [rtl_usb]
[ 19.473937] PGD 202e067 PUD 12ffff067 PMD c8f65063 PTE 80000000c8f3a161
[ 19.474516] Oops: 0003 [#1] SMP
[ 19.475083] Modules linked in: rtl8192su(OE+) rtl8192s_common(OE) rtl_usb(OE) rtlwifi(OE) mac80211 cfg80211 rfkill ...
[ 19.478188] CPU: 0 PID: 470 Comm: systemd-udevd Tainted: G OE 3.17.0-301.fc21.x86_64 #1
[ 19.479373] task: ffff8800c9313ae0 ti: ffff8800c9828000 task.ti: ffff8800c9828000
[ 19.479962] RIP: 0010:[<ffffffffa0501d5e>] [<ffffffffa0501d5e>] rtl_usb_probe+0x64e/0x8f0 [rtl_usb]
[ 19.480558] RSP: 0018:ffff8800c982bb38 EFLAGS: 00010246
[ 19.481146] RAX: ffff8800c8f31a80 RBX: ffff8800c8f31a80 RCX: 0000000000000000
[ 19.481735] RDX: ffffffffa05032e0 RSI: ffffffffa05020c8 RDI: ffff8800c8f30680
[ 19.482317] RBP: ffff8800c982bb80 R08: ffff8800c8f36050 R09: ffff8800c8f35f18
[ 19.482897] R10: ffff8800c8f36058 R11: 00000000000003f6 R12: ffff8800c8f31a80
[ 19.483476] R13: ffff8800c8f30680 R14: ffff88007f53f800 R15: 0000000000000000
[ 19.484066] FS: 00007fe3393cb880(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000
[ 19.484662] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 19.485253] CR2: ffff8800c8f3a3cc CR3: 00000000c9ed2000 CR4: 00000000000007f0
[ 19.485843] Stack:
[ 19.486431] ffff8800c8f35f18 ffff8800c8f36050 ffff8800c8f36058 0000000000000000
[ 19.487032] ffff88007f53f890 ffff88007f53f800 ffffffffa050a068 ffff8801297d3c30
[ 19.487633] ffffffffa050a100 ffff8800c982bb90 ffffffffa0507b55 ffff8800c982bbd8
[ 19.488233] Call Trace:
[ 19.488835] [<ffffffffa0507b55>] rtl8192su_probe+0x15/0x20 [rtl8192su]
[ 19.489433] [<ffffffff81524a0b>] usb_probe_interface+0x1cb/0x340
[ 19.490022] [<ffffffff81498233>] driver_probe_device+0xa3/0x400
[ 19.490596] [<ffffffff8149865b>] __driver_attach+0x8b/0x90
[ 19.491171] [<ffffffff814985d0>] ? __device_attach+0x40/0x40
[ 19.491746] [<ffffffff81495fd3>] bus_for_each_dev+0x73/0xc0
[ 19.492303] [<ffffffff81497cce>] driver_attach+0x1e/0x20
[ 19.492859] [<ffffffff814978a0>] bus_add_driver+0x180/0x250
[ 19.493418] [<ffffffff81498e24>] driver_register+0x64/0xf0
[ 19.493971] [<ffffffff81522fd2>] usb_register_driver+0x82/0x160
[ 19.494523] [<ffffffffa036b000>] ? 0xffffffffa036b000
[ 19.495081] [<ffffffffa036b01e>] rtl92su_driver_init+0x1e/0x1000 [rtl8192su]
[ 19.495638] [<ffffffff81002148>] do_one_initcall+0xd8/0x210
[ 19.496201] [<ffffffff811d1f52>] ? __vunmap+0xa2/0x100
[ 19.496760] [<ffffffff81116c4f>] load_module+0x1ebf/0x2640
[ 19.497320] [<ffffffff81112670>] ? store_uevent+0x70/0x70
[ 19.497877] [<ffffffff81211f37>] ? kernel_read+0x57/0x90
[ 19.498433] [<ffffffff81117596>] SyS_finit_module+0xa6/0xe0
[ 19.498982] [<ffffffff81743469>] system_call_fastpath+0x16/0x1b
[ 19.499523] Code: af 39 00 00 03 c7 80 b0 08 00 00 64 00 00 00 c6 80 b4 08 00 00 00 c6 80 b5 08 00 00 00 c6 80 b7 08 00 00 07 c6 80 b6 08 00 00 03 <c7> 80 4c 89 00 00 02 00 00 00 c7 80 50 89 00 00 ff ff ff ff c7
[ 19.500890] RIP [<ffffffffa0501d5e>] rtl_usb_probe+0x64e/0x8f0 [rtl_usb]
[ 19.501483] RSP <ffff8800c982bb38>
[ 19.502064] CR2: ffff8800c8f3a3cc
[ 19.502651] ---[ end trace a2f95d6ce906062b ]---
and if you don't take into account the measured bandwidth is relatively low comparing the actual possible speed,
see http://goo.gl/3O3Tz4 (speedof.me/m),
you can say it is good to go.
>> - lsusb
>>
>> Bus 002 Device 003: ID 0bda:8171 Realtek Semiconductor Corp. RTL8188SU 802.11n WLAN Adapter
>>
>> ~~~~~~~~~~
>>
>> - lsusb -t
>>
>> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
>> ...
>> |__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=rtl8192su, 480M
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~
>>
>> - ethtool -i wlp0s4f1u3
>>
>> driver: rtl8192su
>> ...
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> - /usr/lib/firmware/rtlwifi/rtl8192sufw.bin
>> eq
>> https://github.com/chunkeey/rtl8192su/raw/master/firmwares/rtl8192sufw-ap.bin
>>
>> ~~~~~~~~~~~~~~~~~~~~~
>>
>> - iwconfig wlp0s4f1u3
>>
>> wlp0s4f1u3 IEEE 802.11bgn Mode:Master Tx-Power=20 dBm
>> Retry short limit:7 RTS thr=2347 B Fragment thr:off
>> Power Management:off
>>
>> ~~~~~~~~~~~~~~~~~~~~~
>>
>> - ifconfig wlp0s4f1u3
>>
>> wlp0s4f1u3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>> inet 10.42.0.1 netmask 255.255.255.0 broadcast 10.42.0.255
>> inet6 fe80::201:2ff:fe03:405 prefixlen 64 scopeid 0x20<link>
>> ether 00:01:02:03:04:05 txqueuelen 1000 (Ethernet)
>> RX packets 77 bytes 7421 (7.2 KiB)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 126 bytes 27469 (26.8 KiB)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> ~~~~~~~~~~~~~~~~~~~~
>>
>> - iw wlp0s4f1u3 info
>>
>> Interface wlp0s4f1u3
>> ifindex 5
>> wdev 0x100000001
>> addr 00:01:02:03:04:05
>> ssid RTL8188SU(rtl8192su)
>> type AP
>> wiphy 1
>> channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz
>>
>> ~~~~~~~~~
>>
>> - iw list
>>
>> Wiphy phy1
>> max # scan SSIDs: 4
>> max scan IEs length: 2257 bytes
>> RTS threshold: 2347
>> Coverage class: 0 (up to 0m)
>> Device supports RSN-IBSS.
>> Supported Ciphers:
>> * WEP40 (00-0f-ac:1)
>> * WEP104 (00-0f-ac:5)
>> * TKIP (00-0f-ac:2)
>> * CCMP (00-0f-ac:4)
>> * CMAC (00-0f-ac:6)
>> Available Antennas: TX 0 RX 0
>> Supported interface modes:
>> * IBSS
>> * managed
>> * AP
>> * AP/VLAN
>> * monitor
>> * mesh point
>> * P2P-client
>> * P2P-GO
>> Band 1:
>> Capabilities: 0x1862
>> HT20/HT40
>> Static SM Power Save
>> RX HT20 SGI
>> RX HT40 SGI
>> No RX STBC
>> Max AMSDU length: 7935 bytes
>> DSSS/CCK HT40
>> Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>> Minimum RX AMPDU time spacing: 16 usec (0x07)
>> HT TX/RX MCS rate indexes supported: 0-7, 32
>> Bitrates (non-HT):
>> * 1.0 Mbps
>> * 2.0 Mbps
>> * 5.5 Mbps
>> * 11.0 Mbps
>> * 6.0 Mbps
>> * 9.0 Mbps
>> * 12.0 Mbps
>> * 18.0 Mbps
>> * 24.0 Mbps
>> * 36.0 Mbps
>> * 48.0 Mbps
>> * 54.0 Mbps
>> Frequencies:
>> * 2412 MHz [1] (20.0 dBm)
>> * 2417 MHz [2] (20.0 dBm)
>> * 2422 MHz [3] (20.0 dBm)
>> * 2427 MHz [4] (20.0 dBm)
>> * 2432 MHz [5] (20.0 dBm)
>> * 2437 MHz [6] (20.0 dBm)
>> * 2442 MHz [7] (20.0 dBm)
>> * 2447 MHz [8] (20.0 dBm)
>> * 2452 MHz [9] (20.0 dBm)
>> * 2457 MHz [10] (20.0 dBm)
>> * 2462 MHz [11] (20.0 dBm)
>> * 2467 MHz [12] (20.0 dBm)
>> * 2472 MHz [13] (20.0 dBm)
>> * 2484 MHz [14] (disabled)
>> Supported commands:
>> * new_interface
>> * set_interface
>> * new_key
>> * start_ap
>> * new_station
>> * new_mpath
>> * set_mesh_config
>> * set_bss
>> * authenticate
>> * associate
>> * deauthenticate
>> * disassociate
>> * join_ibss
>> * join_mesh
>> * set_tx_bitrate_mask
>> * frame
>> * frame_wait_cancel
>> * set_wiphy_netns
>> * set_channel
>> * set_wds_peer
>> * probe_client
>> * set_noack_map
>> * register_beacons
>> * start_p2p_device
>> * set_mcast_rate
>> * Unknown command (104)
>> * connect
>> * disconnect
>> Supported TX frame types:
>> * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>> * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>> * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>> * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>> * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>> * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>> * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>> * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>> Supported RX frame types:
>> * IBSS: 0x40 0xb0 0xc0 0xd0
>> * managed: 0x40 0xd0
>> * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>> * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>> * mesh point: 0xb0 0xc0 0xd0
>> * P2P-client: 0x40 0xd0
>> * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>> * P2P-device: 0x40 0xd0
>> software interface modes (can always be added):
>> * AP/VLAN
>> * monitor
>> interface combinations are not supported
>> HT Capability overrides:
>> * MCS: ff ff ff ff ff ff ff ff ff ff
>> * maximum A-MSDU length
>> * supported channel width
>> * short GI for 40 MHz
>> * max A-MPDU length exponent
>> * min MPDU start spacing
>> Device supports TX status socket option.
>> Device supports HT-IBSS.
>> Device supports low priority scan.
>> Device supports scan flush.
>> Device supports AP scan.
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> - iw wlp0s4f1u3 station dump
>>
>> Station 00:22:44:66:88:aa (on wlp0s4f1u3)
>> inactive time: 15052 ms
>> rx bytes: 36692
>> rx packets: 349
>> tx bytes: 67232
>> tx packets: 282
>> tx retries: 0
>> tx failed: 0
>> signal: -30 dBm
>> signal avg: -30 dBm
>> tx bitrate: 72.2 MBit/s MCS 7 short GI
>> rx bitrate: 6.0 MBit/s
>> authorized: yes
>> authenticated: yes
>> preamble: long
>> WMM/WME: yes
>> MFP: no
>> TDLS peer: no
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> - /etc/NetworkManager/system-connections/AP
>>
>> [connection]
>> id=AP
>> uuid=12345678-1234-5678-9abc-123456789abc
>> type=wifi
>> autoconnect=true
>>
>> [wifi]
>> ssid=RTL8188SU(rtl8192su)
>> mode=ap
>> mac-address=00:01:02:03:04:05
>> security=802-11-wireless-security
>>
>> [wifi-security]
>> key-mgmt=wpa-psk
>> proto=rsn
>> pairwise=ccmp
>> psk=passphrase
>>
>> [ipv4]
>> method=shared
>>
>> [ipv6]
>> method=ignore
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> - journalctl NetworkManager
>>
>> [ 25.277724] systemd[1]: Starting Network Manager...
>> [ 25.616088] NM[820]: <info> NetworkManager (version 0.9.10.0-5.git20140704.fc21) is starting...
>> [ 25.616296] NM[820]: <info> Read config: /etc/NetworkManager/NetworkManager.conf and conf.d: keyfile-plugin.conf
>> [ 25.616468] NM[820]: <info> WEXT support is enabled
>> [ 26.111881] NM[820]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
>> [ 26.137541] NM[820]: <info> new connection /etc/NetworkManager/system-connections/enp3s0
>> [ 26.271517] NM[820]: <info> new connection /etc/NetworkManager/system-connections/AP
>> [ 26.281099] NM[820]: <info> new connection /etc/NetworkManager/system-connections/MBB
>> [ 26.296694] NM[820]: <info> monitoring kernel firmware directory '/lib/firmware'.
>> [ 26.298418] NM[820]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:04.1/usb2/2-3/2-3:1.0/ieee80211/phy0/rfkill0) (driver rtl8192su)
>> [ 26.298898] NM[820]: <info> WiFi hardware radio set enabled
>> [ 26.299359] NM[820]: <info> WWAN hardware radio set enabled
>> [ 26.301854] NM[820]: <info> Loaded device plugin: /usr/lib64/NetworkManager/libnm-device-plugin-wwan.so
>> [ 26.302361] NM[820]: <info> Loaded device plugin: /usr/lib64/NetworkManager/libnm-device-plugin-wifi.so
>> [ 26.302818] NM[820]: <info> WiFi enabled by radio killswitch; enabled by state file
>> [ 26.303284] NM[820]: <info> WWAN enabled by radio killswitch; enabled by state file
>> [ 26.303754] NM[820]: <info> WiMAX enabled by radio killswitch; enabled by state file
>> [ 26.304255] NM[820]: <info> Networking is enabled by state file
>> [ 26.304632] systemd[1]: Started Network Manager.
>> [ 26.313508] NM[820]: <info> (lo): link connected
>> [ 26.313671] NM[820]: <info> (lo): carrier is ON
>> [ 26.313817] NM[820]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
>> [ 26.313967] NM[820]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
>> [ 26.347836] NM[820]: <info> (enp3s0): carrier is OFF
>> [ 26.365975] NM[820]: <info> (enp3s0): new Ethernet device (driver: 'r8169' ifindex: 3)
>> [ 26.366704] NM[820]: <info> (enp3s0): exported as /org/freedesktop/NetworkManager/Devices/1
>> [ 26.367298] NM[820]: <info> (enp3s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
>> [ 26.389929] NM[820]: <info> (enp3s0): preparing device
>> [ 26.391212] NM[820]: <info> (wlp0s4f1u3): using nl80211 for WiFi device control
>> [ 26.391720] NM[820]: <info> (wlp0s4f1u3): driver supports Access Point (AP) mode
>> [ 26.392201] NM[820]: <info> (wlp0s4f1u3): new 802.11 WiFi device (driver: 'rtl8192su' ifindex: 4)
>> [ 26.392649] NM[820]: <info> (wlp0s4f1u3): exported as /org/freedesktop/NetworkManager/Devices/2
>> [ 26.393123] NM[820]: <info> (wlp0s4f1u3): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
>> [ 27.348116] NM[820]: <info> (wlp0s4f1u3): preparing device
>> [ 27.357681] NM[820]: <info> ModemManager available in the bus
>> [ 28.033860] NM[820]: <info> (enp3s0): link connected
>> [ 28.035054] NM[820]: <info> (enp3s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
>> [ 28.035713] NM[820]: <info> Auto-activating connection 'enp3s0'.
>> [ 28.040332] NM[820]: <info> Activation (enp3s0) starting connection 'enp3s0'
>> [ 28.040846] NM[820]: <info> Activation (enp3s0) Stage 1 of 5 (Device Prepare) scheduled...
>> [ 28.041318] NM[820]: <info> Activation (enp3s0) Stage 1 of 5 (Device Prepare) started...
>> [ 28.041776] NM[820]: <info> (enp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
>> [ 28.042246] NM[820]: <info> NetworkManager state is now CONNECTING
>> [ 28.042698] NM[820]: <info> Activation (enp3s0) Stage 2 of 5 (Device Configure) scheduled...
>> [ 28.043182] NM[820]: <info> Activation (enp3s0) Stage 1 of 5 (Device Prepare) complete.
>> [ 28.043634] NM[820]: <info> Activation (enp3s0) Stage 2 of 5 (Device Configure) starting...
>> [ 28.044072] NM[820]: <info> (enp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
>> [ 28.061851] NM[820]: <info> Activation (enp3s0) Stage 2 of 5 (Device Configure) successful.
>> [ 28.062348] NM[820]: <info> Activation (enp3s0) Stage 2 of 5 (Device Configure) complete.
>> [ 28.325821] NM[820]: <info> wpa_supplicant started
>> [ 28.466946] NM[820]: <info> (wlp0s4f1u3) supports 4 scan SSIDs
>> [ 28.467471] NM[820]: <info> (wlp0s4f1u3): supplicant interface state: starting -> ready
>> [ 28.467930] NM[820]: <info> (wlp0s4f1u3): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
>> [ 28.468893] NM[820]: <info> (wlp0s4f1u3): supplicant interface state: ready -> disconnected
>> [ 28.469370] NM[820]: <info> (wlp0s4f1u3) supports 4 scan SSIDs
>> [ 28.469837] NM[820]: <info> Auto-activating connection 'AP'.
>> [ 28.475692] NM[820]: <info> Activation (wlp0s4f1u3) starting connection 'AP'
>> [ 28.476128] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) scheduled...
>> [ 28.476311] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) started...
>> [ 28.476491] NM[820]: <info> (wlp0s4f1u3): device state change: disconnected -> prepare (reason 'none') [30 40 0]
>> [ 28.476672] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) scheduled...
>> [ 28.476852] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) complete.
>> [ 28.477047] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) starting...
>> [ 28.477225] NM[820]: <info> (wlp0s4f1u3): device state change: prepare -> config (reason 'none') [40 50 0]
>> [ 28.477400] NM[820]: <info> Activation (wlp0s4f1u3/wireless): connection 'AP' has security, and secrets exist. No new secrets needed.
>> [ 28.477574] NM[820]: <info> Config: added 'ssid' value 'RTL8188SU(rtl8192su)'
>> [ 28.477750] NM[820]: <info> Config: added 'mode' value '2'
>> [ 28.477925] NM[820]: <info> Config: added 'frequency' value '2412'
>> [ 28.478111] NM[820]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
>> [ 28.478286] NM[820]: <info> Config: added 'psk' value '<omitted>'
>> [ 28.478459] NM[820]: <info> Config: added 'proto' value 'RSN'
>> [ 28.478632] NM[820]: <info> Config: added 'pairwise' value 'CCMP'
>> [ 28.478809] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) complete.
>> [ 28.478982] NM[820]: <info> Config: set interface ap_scan to 2
>> [ 28.738684] NM[820]: <info> (wlp0s4f1u3): supplicant interface state: disconnected -> completed
>> [ 28.738891] NM[820]: <info> Activation (wlp0s4f1u3/wireless) Stage 2 of 5 (Device Configure) successful. Started Wi-Fi Hotspot 'RTL8188SU(rtl8192su)'.
>> [ 34.977083] NM[820]: <info> Activation (enp3s0) Stage 3 of 5 (IP Configure Start) scheduled.
>> [ 34.977610] NM[820]: <info> Activation (enp3s0) Stage 3 of 5 (IP Configure Start) started...
>> [ 34.978096] NM[820]: <info> (enp3s0): device state change: config -> ip-config (reason 'none') [50 70 0]
>> [ 34.978554] NM[820]: <info> Activation (enp3s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
>> [ 35.304547] NM[820]: <info> dhclient started with pid 1395
>> [ 35.305087] NM[820]: <info> Activation (enp3s0) Stage 3 of 5 (IP Configure Start) complete.
>> [ 35.306502] NM[820]: <info> Activation (wlp0s4f1u3) Stage 3 of 5 (IP Configure Start) scheduled.
>> [ 35.306985] NM[820]: <info> Activation (wlp0s4f1u3) Stage 3 of 5 (IP Configure Start) started...
>> [ 35.307480] NM[820]: <info> (wlp0s4f1u3): device state change: config -> ip-config (reason 'none') [50 70 0]
>> [ 35.307976] NM[820]: <info> Activation (wlp0s4f1u3) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
>> [ 35.308447] NM[820]: <info> Activation (wlp0s4f1u3) Stage 3 of 5 (IP Configure Start) complete.
>> [ 35.308937] NM[820]: <info> Activation (wlp0s4f1u3) Stage 5 of 5 (IPv4 Commit) started...
>> [ 35.490657] dhclient[1395]: Internet Systems Consortium DHCP Client 4.3.1
>> [ 35.491211] dhclient[1395]: Copyright 2004-2014 Internet Systems Consortium.
>> [ 35.491674] dhclient[1395]: All rights reserved.
>> [ 35.492147] dhclient[1395]: For info, please visit https://www.isc.org/software/dhcp/
>> [ 35.492592] dhclient[1395]:
>> [ 35.493078] NM[820]: Internet Systems Consortium DHCP Client 4.3.1
>> [ 35.493519] NM[820]: Copyright 2004-2014 Internet Systems Consortium.
>> [ 35.493950] NM[820]: All rights reserved.
>> [ 35.494211] NM[820]: For info, please visit https://www.isc.org/software/dhcp/
>> [ 36.725988] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface wlp0s4f1u3 --protocol tcp --destination-port 53 --jump ACCEPT
>> [ 36.733764] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface wlp0s4f1u3 --protocol udp --destination-port 53 --jump ACCEPT
>> [ 36.752064] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface wlp0s4f1u3 --protocol tcp --destination-port 67 --jump ACCEPT
>> [ 36.757195] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface wlp0s4f1u3 --protocol udp --destination-port 67 --jump ACCEPT
>> [ 36.776083] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --in-interface wlp0s4f1u3 --jump REJECT
>> [ 36.781590] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --out-interface wlp0s4f1u3 --jump REJECT
>> [ 36.786875] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --in-interface wlp0s4f1u3 --out-interface wlp0s4f1u3 --jump ACCEPT
>> [ 36.789805] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --source 10.42.0.0/255.255.255.0 --in-interface wlp0s4f1u3 --jump ACCEPT
>> [ 36.792748] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --destination 10.42.0.0/255.255.255.0 --out-interface wlp0s4f1u3 --match state --state ESTABLISHED,RELATED --jump ACCEPT
>> [ 38.812843] NM[820]: <info> Executing: /usr/sbin/iptables --table nat --insert POSTROUTING --source 10.42.0.0/255.255.255.0 ! --destination 10.42.0.0/255.255.255.0 --jump MASQUERADE
>> [ 38.816972] NM[820]: <info> Starting dnsmasq...
>> [ 38.818556] NM[820]: <info> (wlp0s4f1u3): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
>> [ 38.818941] NM[820]: <info> Activation (wlp0s4f1u3) Stage 5 of 5 (IPv4 Commit) complete.
>> [ 38.822707] NM[820]: <info> (enp3s0): DHCPv4 state changed nbi -> preinit
>> [ 38.825233] NM[820]: <info> (wlp0s4f1u3): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
>> [ 38.826026] NM[820]: <info> (wlp0s4f1u3): device state change: secondaries -> activated (reason 'none') [90 100 0]
>> [ 38.881776] dhclient[1395]: Listening on LPF/enp3s0/00:12:34:56:78:30
>> [ 38.882317] dhclient[1395]: Sending on LPF/enp3s0/00:12:34:56:78:30
>> [ 38.882777] dhclient[1395]: Sending on Socket/fallback
>> [ 38.883995] dhclient[1395]: DHCPREQUEST on enp3s0 to 255.255.255.255 port 67 (xid=0x9c4e1f)
>> [ 38.884524] dhclient[1395]: DHCPACK from 192.168.2.1 (xid=0x9c4e1f)
>> [ 38.885027] NM[820]: Listening on LPF/enp3s0/00:12:34:56:78:30
>> [ 38.885471] NM[820]: Sending on LPF/enp3s0/00:12:34:56:78:30
>> [ 38.885903] NM[820]: Sending on Socket/fallback
>> [ 38.886356] NM[820]: DHCPREQUEST on enp3s0 to 255.255.255.255 port 67 (xid=0x9c4e1f)
>> [ 38.886787] NM[820]: DHCPACK from 192.168.2.1 (xid=0x9c4e1f)
>> [ 39.008666] dnsmasq[1416]: started, version 2.72 cachesize 150
>> [ 39.009255] dnsmasq[1416]: compile time options: IPv6 GNU-getopt DBus no-i18n IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth DNSSEC loop-detect
>> [ 39.009719] dnsmasq-dhcp[1416]: DHCP, IP range 10.42.0.10 -- 10.42.0.254, lease time 1h
>> [ 39.010186] dnsmasq[1416]: reading /etc/resolv.conf
>> [ 39.010634] dnsmasq[1416]: using nameserver 192.168.2.1#53
>> [ 39.012048] dnsmasq[1416]: cleared cache
>> [ 44.464210] NM[820]: <info> Activation (wlp0s4f1u3) successful, device activated.
>> [ 44.470643] NM[820]: <info> (enp3s0): DHCPv4 state changed preinit -> reboot
>> [ 44.472389] NM[820]: <info> address 192.168.2.35
>> [ 44.472910] NM[820]: <info> plen 24 (255.255.255.0)
>> [ 44.473421] NM[820]: <info> gateway 192.168.2.1
>> [ 44.473892] NM[820]: <info> server identifier 192.168.2.1
>> [ 44.474382] NM[820]: <info> lease time 600
>> [ 44.474841] NM[820]: <info> nameserver '192.168.2.1'
>> [ 44.476312] NM[820]: <info> Activation (enp3s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
>> [ 44.476428] NM[820]: <info> Activation (enp3s0) Stage 5 of 5 (IPv4 Commit) started...
>> [ 44.476548] NM[820]: <info> (enp3s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
>> [ 44.476664] NM[820]: <info> Activation (enp3s0) Stage 5 of 5 (IPv4 Commit) complete.
>> [ 44.476782] NM[820]: <info> (enp3s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
>> [ 44.476897] NM[820]: <info> (enp3s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
>> [ 44.477060] NM[820]: <info> NetworkManager state is now CONNECTED_LOCAL
>> [ 44.671564] dhclient[1395]: bound to 192.168.2.35 -- renewal in 253 seconds.
>> [ 44.672104] NM[820]: bound to 192.168.2.35 -- renewal in 253 seconds.
>> [ 44.672581] NM[820]: <info> NetworkManager state is now CONNECTED_GLOBAL
>> [ 44.673074] NM[820]: <info> Policy set 'enp3s0' (enp3s0) as default for IPv4 routing and DNS.
>> [ 44.719277] NM[820]: <info> Activation (enp3s0) successful, device activated.
>> [ 44.721265] NM[820]: <info> startup complete
>> [ 95.712977] dnsmasq[1416]: reading /etc/resolv.conf
>> [ 95.713657] dnsmasq[1416]: using nameserver 192.168.2.1#53
>> [ 95.715255] dnsmasq[1416]: cleared cache
>> [ 217.044170] dnsmasq-dhcp[1416]: DHCPREQUEST(wlp0s4f1u3) 10.42.0.77 00:22:44:66:88:aa
>> [ 217.044896] dnsmasq-dhcp[1416]: DHCPACK(wlp0s4f1u3) 10.42.0.77 00:22:44:66:88:aa android-0123456789abcdef
>> ...
>> [ 1240.752553] dnsmasq-dhcp[1416]: DHCPREQUEST(wlp0s4f1u3) 10.42.0.77 00:22:44:66:88:aa
>> [ 1240.813416] dnsmasq-dhcp[1416]: DHCPACK(wlp0s4f1u3) 10.42.0.77 00:22:44:66:88:aa android-0123456789abcdef
>> ...
>> [ 1408.894826] dnsmasq-dhcp[1416]: DHCPREQUEST(wlp0s4f1u3) 10.42.0.77 00:22:44:66:88:aa
>> [ 1408.895557] dnsmasq-dhcp[1416]: DHCPACK(wlp0s4f1u3) 10.42.0.77 00:22:44:66:88:aa android-0123456789abcdef
>>
>> - systemctl suspend
>> & resume(S3)
>>
>> [ 1689.325793] NM[820]: <info> (wlp0s4f1u3): device state change: activated -> unmanaged (reason 'removed') [100 10 36]
>> [ 1689.325961] NM[820]: <info> (wlp0s4f1u3): deactivating device (reason 'removed') [36]
>> [ 1689.326448] NM[820]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:04.1/usb2/2-3/2-3:1.0/ieee80211/phy0/rfkill0 disappeared
>> [ 1689.326580] NM[820]: <info> (wlp0s4f1u3): using nl80211 for WiFi device control
>> [ 1689.326709] NM[820]: <info> (wlp0s4f1u3): driver supports Access Point (AP) mode
>> [ 1689.326834] NM[820]: <info> (wlp0s4f1u3): new 802.11 WiFi device (driver: 'rtl8192su' ifindex: 5)
>> [ 1689.326966] NM[820]: <info> (wlp0s4f1u3): exported as /org/freedesktop/NetworkManager/Devices/3
>> [ 1689.327098] NM[820]: <info> (wlp0s4f1u3): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
>> [ 1689.327223] NM[820]: <info> (wlp0s4f1u3): preparing device
>> [ 1689.328176] NM[820]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:04.1/usb2/2-3/2-3:1.0/ieee80211/phy1/rfkill1) (driver rtl8192su)
>> [ 1689.329155] NM[820]: <info> Executing: /usr/sbin/iptables --table nat --delete POSTROUTING --source 10.42.0.0/255.255.255.0 ! --destination 10.42.0.0/255.255.255.0 --jump MASQUERADE
>> [ 1689.331088] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete FORWARD --destination 10.42.0.0/255.255.255.0 --out-interface wlp0s4f1u3 --match state --state ESTABLISHED,RELATED --jump ACCEPT
>> [ 1689.334823] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete FORWARD --source 10.42.0.0/255.255.255.0 --in-interface wlp0s4f1u3 --jump ACCEPT
>> [ 1689.336627] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete FORWARD --in-interface wlp0s4f1u3 --out-interface wlp0s4f1u3 --jump ACCEPT
>> [ 1689.338561] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete FORWARD --out-interface wlp0s4f1u3 --jump REJECT
>> [ 1689.341038] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete FORWARD --in-interface wlp0s4f1u3 --jump REJECT
>> [ 1689.343125] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete INPUT --in-interface wlp0s4f1u3 --protocol udp --destination-port 67 --jump ACCEPT
>> [ 1689.380119] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete INPUT --in-interface wlp0s4f1u3 --protocol tcp --destination-port 67 --jump ACCEPT
>> [ 1689.385774] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete INPUT --in-interface wlp0s4f1u3 --protocol udp --destination-port 53 --jump ACCEPT
>> [ 1690.325415] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --delete INPUT --in-interface wlp0s4f1u3 --protocol tcp --destination-port 53 --jump ACCEPT
>> [ 1690.336827] NM[820]: <info> (wlp0s4f1u3) supports 4 scan SSIDs
>> [ 1690.337091] NM[820]: <info> (wlp0s4f1u3): supplicant interface state: starting -> ready
>> [ 1690.337297] NM[820]: <info> (wlp0s4f1u3): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
>> [ 1690.337493] NM[820]: <info> (wlp0s4f1u3): supplicant interface state: ready -> disconnected
>> [ 1690.337686] NM[820]: <info> (wlp0s4f1u3) supports 4 scan SSIDs
>> [ 1690.337884] NM[820]: <info> Auto-activating connection 'AP'.
>> [ 1690.338085] NM[820]: <info> Activation (wlp0s4f1u3) starting connection 'AP'
>> [ 1690.338281] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) scheduled...
>> [ 1690.338472] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) started...
>> [ 1690.338672] NM[820]: <info> (wlp0s4f1u3): device state change: disconnected -> prepare (reason 'none') [30 40 0]
>> [ 1690.338865] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) scheduled...
>> [ 1690.339062] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) complete.
>> [ 1690.339257] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) starting...
>> [ 1690.339452] NM[820]: <info> (wlp0s4f1u3): device state change: prepare -> config (reason 'none') [40 50 0]
>> [ 1690.343841] NM[820]: <info> Activation (wlp0s4f1u3/wireless): access point 'AP' has security, but secrets are required.
>> [ 1690.344110] NM[820]: <info> (wlp0s4f1u3): device state change: config -> need-auth (reason 'none') [50 60 0]
>> [ 1690.344304] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) complete.
>> [ 1690.344436] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) scheduled...
>> [ 1690.348812] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) started...
>> [ 1690.348980] NM[820]: <info> (wlp0s4f1u3): device state change: need-auth -> prepare (reason 'none') [60 40 0]
>> [ 1690.349130] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) scheduled...
>> [ 1690.349260] NM[820]: <info> Activation (wlp0s4f1u3) Stage 1 of 5 (Device Prepare) complete.
>> [ 1690.349389] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) starting...
>> [ 1690.349519] NM[820]: <info> (wlp0s4f1u3): device state change: prepare -> config (reason 'none') [40 50 0]
>> [ 1690.349653] NM[820]: <info> Activation (wlp0s4f1u3/wireless): connection 'AP' has security, and secrets exist. No new secrets needed.
>> [ 1690.349783] NM[820]: <info> Config: added 'ssid' value 'RTL8188SU(rtl8192su)'
>> [ 1690.349911] NM[820]: <info> Config: added 'mode' value '2'
>> [ 1690.350052] NM[820]: <info> Config: added 'frequency' value '2412'
>> [ 1690.350186] NM[820]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
>> [ 1690.350311] NM[820]: <info> Config: added 'psk' value '<omitted>'
>> [ 1690.350440] NM[820]: <info> Config: added 'proto' value 'RSN'
>> [ 1690.350567] NM[820]: <info> Config: added 'pairwise' value 'CCMP'
>> [ 1690.350692] NM[820]: <info> Activation (wlp0s4f1u3) Stage 2 of 5 (Device Configure) complete.
>> [ 1690.355138] NM[820]: <info> Config: set interface ap_scan to 2
>> [ 1690.439942] NM[820]: <info> (wlp0s4f1u3): supplicant interface state: disconnected -> completed
>> [ 1690.440552] NM[820]: <info> Activation (wlp0s4f1u3/wireless) Stage 2 of 5 (Device Configure) successful. Started Wi-Fi Hotspot 'RTL8188SU(rtl8192su)'.
>> [ 1690.496432] NM[820]: <info> Activation (wlp0s4f1u3) Stage 3 of 5 (IP Configure Start) scheduled.
>> [ 1690.497084] NM[820]: <info> Activation (wlp0s4f1u3) Stage 3 of 5 (IP Configure Start) started...
>> [ 1690.497617] NM[820]: <info> (wlp0s4f1u3): device state change: config -> ip-config (reason 'none') [50 70 0]
>> [ 1690.498145] NM[820]: <info> Activation (wlp0s4f1u3) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
>> [ 1690.498669] NM[820]: <info> Activation (wlp0s4f1u3) Stage 3 of 5 (IP Configure Start) complete.
>> [ 1690.499196] NM[820]: <info> Activation (wlp0s4f1u3) Stage 5 of 5 (IPv4 Commit) started...
>> [ 1690.519773] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface wlp0s4f1u3 --protocol tcp --destination-port 53 --jump ACCEPT
>> [ 1690.522189] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface wlp0s4f1u3 --protocol udp --destination-port 53 --jump ACCEPT
>> [ 1690.550111] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface wlp0s4f1u3 --protocol tcp --destination-port 67 --jump ACCEPT
>> [ 1690.555813] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert INPUT --in-interface wlp0s4f1u3 --protocol udp --destination-port 67 --jump ACCEPT
>> [ 1690.573980] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --in-interface wlp0s4f1u3 --jump REJECT
>> [ 1690.577369] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --out-interface wlp0s4f1u3 --jump REJECT
>> [ 1690.580764] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --in-interface wlp0s4f1u3 --out-interface wlp0s4f1u3 --jump ACCEPT
>> [ 1690.585441] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --source 10.42.0.0/255.255.255.0 --in-interface wlp0s4f1u3 --jump ACCEPT
>> [ 1690.587979] NM[820]: <info> Executing: /usr/sbin/iptables --table filter --insert FORWARD --destination 10.42.0.0/255.255.255.0 --out-interface wlp0s4f1u3 --match state --state ESTABLISHED,RELATED --jump ACCEPT
>> [ 1690.590492] NM[820]: <info> Executing: /usr/sbin/iptables --table nat --insert POSTROUTING --source 10.42.0.0/255.255.255.0 ! --destination 10.42.0.0/255.255.255.0 --jump MASQUERADE
>> [ 1690.592764] NM[820]: <info> Starting dnsmasq...
>> [ 1690.593692] NM[820]: <info> (wlp0s4f1u3): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
>> [ 1690.594290] NM[820]: <info> Activation (wlp0s4f1u3) Stage 5 of 5 (IPv4 Commit) complete.
>> [ 1690.595395] dnsmasq[3442]: started, version 2.72 cachesize 150
>> [ 1690.595629] dnsmasq[3442]: compile time options: IPv6 GNU-getopt DBus no-i18n IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth DNSSEC loop-detect
>> [ 1690.595822] dnsmasq-dhcp[3442]: DHCP, IP range 10.42.0.10 -- 10.42.0.254, lease time 1h
>> [ 1690.596021] dnsmasq[3442]: reading /etc/resolv.conf
>> [ 1690.596216] dnsmasq[3442]: using nameserver 192.168.2.1#53
>> [ 1690.596793] dnsmasq[3442]: cleared cache
>> [ 1690.596982] NM[820]: <info> (wlp0s4f1u3): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
>> [ 1690.597182] NM[820]: <info> (wlp0s4f1u3): device state change: secondaries -> activated (reason 'none') [90 100 0]
>> [ 1691.068838] NM[820]: <info> Activation (wlp0s4f1u3) successful, device activated.
>> [ 1698.780512] dnsmasq-dhcp[3442]: DHCPREQUEST(wlp0s4f1u3) 10.42.0.77 00:22:44:66:88:aa
>> [ 1698.781136] dnsmasq-dhcp[3442]: DHCPACK(wlp0s4f1u3) 10.42.0.77 00:22:44:66:88:aa android-0123456789abcdef
>>
>> ~~~~~~~
>>
>> - dmesg
>>
>> [ 2.126073] usb 2-3: new high-speed USB device number 3 using ehci-pci
>> [ 2.242873] usb 2-3: New USB device found, idVendor=0bda, idProduct=8171
>> [ 2.242880] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> [ 2.242883] usb 2-3: Product: RTL8188S WLAN Adapter
>> [ 2.242885] usb 2-3: Manufacturer: Manufacturer Realtek
>> [ 2.242887] usb 2-3: SerialNumber: 00e04c000001
>> [ 20.134415] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
>> [ 20.517392] rtl8192s_common: Chip version 0x3
>> [ 20.686391] rtl_usb: rx_max_size 9100, rx_urb_num 8, in_ep 3
>> [ 20.687057] rtl8192su: Power Save off (module option)
>> [ 20.687639] rtl8192su: FW Power Save off (module option)
>> [ 20.688394] rtl8192su: Driver for Realtek RTL8192SU/RTL8191SU
>> Loading firmware rtlwifi/rtl8192sufw.bin
>> [ 20.689751] usbcore: registered new interface driver rtl8192su
>> [ 20.850838] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
>> [ 20.854551] rtl8192su 2-3:1.0 wlp0s4f1u3: renamed from wlan0
>>
>> - systemctl suspend
>>
>> [ 1679.990678] PM: Preparing system for mem sleep
>> [ 1680.178832] Freezing user space processes ... (elapsed 0.048 seconds) done.
>> [ 1680.226937] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>> [ 1680.228270] PM: Entering mem sleep
>> [ 1680.228299] Suspending console(s) (use no_console_suspend to debug)
>> [ 1682.772451] PM: suspend of devices complete after 2543.533 msecs
>> [ 1682.773864] PM: late suspend of devices complete after 1.407 msecs
>> [ 1682.775348] ehci-pci 0000:00:02.1: System wakeup enabled by ACPI
>> [ 1682.786410] PM: noirq suspend of devices complete after 12.536 msecs
>> [ 1682.787692] ACPI: Preparing to enter system sleep state S3
>> [ 1682.788861] PM: Saving platform NVS memory
>>
>> & resume(S3)
>>
>> [ 1682.798859] ACPI: Low-level resume complete
>> [ 1682.798924] PM: Restoring platform NVS memory
>> [ 1682.844566] ACPI: Waking up from system sleep state S3
>> [ 1682.855147] ehci-pci 0000:00:02.1: System wakeup disabled by ACPI
>> [ 1682.856186] PM: noirq resume of devices complete after 11.457 msecs
>> [ 1682.856759] PM: early resume of devices complete after 0.531 msecs
>> [ 1683.074063] PM: resume of devices complete after 217.286 msecs
>> [ 1683.074332] rtl8192s_common: Chip version 0x3
>> [ 1683.218439] rtl_usb: rx_max_size 9100, rx_urb_num 8, in_ep 3
>> [ 1683.218484] rtl8192su: Power Save off (module option)
>> [ 1683.218485] rtl8192su: FW Power Save off (module option)
>> [ 1683.218694] rtl8192su: Driver for Realtek RTL8192SU/RTL8191SU
>> Loading firmware rtlwifi/rtl8192sufw.bin
>> [ 1683.219176] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
>> [ 1683.234998] PM: Finishing wakeup.
>> [ 1683.235003] Restarting tasks ... done.
>> [ 1683.258259] rtl8192su 2-3:1.0 wlp0s4f1u3: renamed from wlan0
>> [ 1683.270928] IPv6: ADDRCONF(NETDEV_UP): wlp0s4f1u3: link is not ready
>> [ 1684.238973] IPv6: ADDRCONF(NETDEV_UP): wlp0s4f1u3: link is not ready
>> [ 1684.401143] r8169 0000:03:00.0 enp3s0: link up
>> [ 1691.249718] IPv6: ADDRCONF(NETDEV_UP): wlp0s4f1u3: link is not ready
>> [ 1691.376981] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s4f1u3: link becomes ready
>>
>> ~~~~~~~~~~~~~~~~~~~~
>>
>> http://goo.gl/3O3Tz4
>>
>>
>> poma
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
next prev parent reply other threads:[~2014-10-15 2:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-29 9:29 RTL8188SU(rtl8192su) - unavailable poma
2014-09-29 19:46 ` Dan Williams
2014-10-02 3:45 ` poma
[not found] ` <CAAd0S9ARKg4RSQ_CYrEu8ggm3mWqL8a3ODgJDMnaKbHXpMZPCA@mail.gmail.com>
2014-10-02 15:04 ` poma
2014-10-06 20:33 ` poma
2014-10-14 0:59 ` RTL8188SU(rtl8192su) & rtl8192sufw-ap.bin poma
2014-10-14 20:22 ` Dan Williams
2014-10-15 2:20 ` poma [this message]
2014-10-17 17:26 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=543DDA00.9090709@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=Joshua.Roys@gtri.gatech.edu \
--cc=Larry.Finger@lwfinger.net \
--cc=chaoming_li@realsil.com.cn \
--cc=chunkeey@googlemail.com \
--cc=dcbw@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=networkmanager-list@gnome.org \
--cc=wlanfae@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).