From: Oleksij Rempel <linux@rempel-privat.de>
To: Arend van Spriel <arend@broadcom.com>, Hong Xu <hong@topbug.net>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH v2] ath9k_htc: Add a module parameter to disable blink
Date: Mon, 12 Jan 2015 11:35:12 +0100 [thread overview]
Message-ID: <54B3A360.2080003@rempel-privat.de> (raw)
In-Reply-To: <54B39888.2080701@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 2732 bytes --]
Am 12.01.2015 um 10:48 schrieb Arend van Spriel:
> On 01/11/15 20:45, Hong Xu wrote:
>> Add an option "blink" to enable or disable the LED blink. The default
>> value is set to 1 so that existing users would not experience any
>> unexpected changes.
>>
>> Signed-off-by: Hong Xu<hong@topbug.net>
>> ---
>> drivers/net/wireless/ath/ath9k/htc.h | 3 +++
>> drivers/net/wireless/ath/ath9k/htc_drv_gpio.c | 4 ++++
>> drivers/net/wireless/ath/ath9k/htc_drv_init.c | 4 ++++
>> 3 files changed, 11 insertions(+)
>>
>> diff --git a/drivers/net/wireless/ath/ath9k/htc.h
>> b/drivers/net/wireless/ath/ath9k/htc.h
>> index 9dde265..c43fec5 100644
>> --- a/drivers/net/wireless/ath/ath9k/htc.h
>> +++ b/drivers/net/wireless/ath/ath9k/htc.h
>> @@ -44,6 +44,9 @@
>>
>> extern struct ieee80211_ops ath9k_htc_ops;
>> extern int htc_modparam_nohwcrypt;
>> +#ifdef CONFIG_MAC80211_LEDS
>> +extern int led_blink;
>> +#endif
>>
>> enum htc_phymode {
>> HTC_MODE_11NA = 0,
>> diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
>> b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
>> index 50f74a2..998b558 100644
>> --- a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
>> +++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
>> @@ -279,6 +279,10 @@ void ath9k_init_leds(struct ath9k_htc_priv *priv)
>> else
>> priv->ah->led_pin = ATH_LED_PIN_DEF;
>>
>> + if (!led_blink)
>> + priv->led_cdev.default_trigger =
>> + ieee80211_get_radio_led_name(priv->hw);
>> +
>
> So is this function/file also conditionally compiled on
> CONFIG_MAC80211_LEDS. In my tree it is not so you will get a warning and
> loading the module will probably fail.
It is conditionally compiled on CONFIG_MAC80211_LEDS.
> Regards,
> Arend
>
>> ath9k_configure_leds(priv);
>>
>> snprintf(priv->led_name, sizeof(priv->led_name),
>> diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
>> b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
>> index e8fa944..9470127 100644
>> --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
>> +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
>> @@ -39,6 +39,10 @@ module_param_named(ps_enable, ath9k_ps_enable, int,
>> 0444);
>> MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
>>
>> #ifdef CONFIG_MAC80211_LEDS
>> +int led_blink = 1;
>> +module_param_named(blink, led_blink, int, 0444);
>> +MODULE_PARM_DESC(blink, "Enable LED blink on activity");
>> +
>> static const struct ieee80211_tpt_blink ath9k_htc_tpt_blink[] = {
>> { .throughput = 0 * 1024, .blink_time = 334 },
>> { .throughput = 1 * 1024, .blink_time = 260 },
>
--
Regards,
Oleksij
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 213 bytes --]
next prev parent reply other threads:[~2015-01-12 10:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-11 19:45 [PATCH v2] ath9k_htc: Add a module parameter to disable blink Hong Xu
2015-01-12 9:48 ` Arend van Spriel
2015-01-12 10:35 ` Oleksij Rempel [this message]
2015-01-23 17:16 ` [v2] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54B3A360.2080003@rempel-privat.de \
--to=linux@rempel-privat.de \
--cc=arend@broadcom.com \
--cc=hong@topbug.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).