From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail2.candelatech.com ([208.74.158.173]:51504 "EHLO mail2.candelatech.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751076AbbCKPxy (ORCPT ); Wed, 11 Mar 2015 11:53:54 -0400 Message-ID: <55006511.6020101@candelatech.com> (sfid-20150311_165357_712243_FCECFBE9) Date: Wed, 11 Mar 2015 08:53:53 -0700 From: Ben Greear MIME-Version: 1.0 To: Janusz Dziedzic CC: linux-wireless@vger.kernel.org, Johannes Berg Subject: Re: [PATCH] iw: Allow configuring empty legacy and ht ratesets. References: <1426028412-17438-1-git-send-email-greearb@candelatech.com> In-Reply-To: Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: On 03/10/2015 11:10 PM, Janusz Dziedzic wrote: > On 11 March 2015 at 00:00, wrote: >> From: Ben Greear >> >> This allows one to configure exactly one rate for drivers >> such as ath10k that will only allow a single rate to be >> configured. >> > > Hello, > > But iw already support setting single rate with ath10k. > This is example from ath10k commit log: Ahh, I see. I was confused about what syntax to use for 'iw', must have typo'd something early on and then though the limitation was in the parser. Thanks, Ben > > Example: > iw wlanX set bitrates legacy-5 ht-mcs-5 vht-mcs-5 2:9 > will setup VHT, nss=2, mcs=9 > > iw wlanX set bitrates legacy-5 18 ht-mcs-5 vht-mcs-5 > will setup legacy, 18Mbps > > iw wlanX set bitrates legacy-5 ht-mcs-5 3 vht-mcs-5 > will setup HT, nss=1, mcs=3 > > iw wlanX set bitrate legacy-5 ht-mcs-5 vht-mcs-5 1:0-9 > will setup nss=1 > > iw wlanX set bitrate legacy-5 ht-mcs-5 vht-mcs-5 1:0-9 2:0-9 > will setup nss=2 > > BR > Janusz > -- Ben Greear Candela Technologies Inc http://www.candelatech.com