linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Anyone tried ath10k AP with 40Mhz operation?
@ 2015-06-10 20:31 Ben Greear
  2015-06-11  6:54 ` Michal Kazior
  0 siblings, 1 reply; 4+ messages in thread
From: Ben Greear @ 2015-06-10 20:31 UTC (permalink / raw)
  To: ath10k, linux-wireless@vger.kernel.org

I'm trying this hostapd config file.  Beacons seem OK, and station
associates.  Station puts DHCP Discover on the air (using 20Mhz according
to wireshark).  AP reads this, and thinks it is sending a DHCP response back,
but sniffer never shows DHCP response on the air.

Kernel is 4.0.4+, ath10k firmware is CT firmware, 10.1.467 based.

I am curious if anyone else has tried to do this?

Thanks,
Ben

interface=vap50
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=ben-ota-2a
bssid=04:f0:21:98:d2:34
country_code=US
ieee80211d=0
ieee80211h=0
ieee80211w=0
hw_mode=a
ieee80211n=1
ieee80211ac=1
beacon_int=240
dtim_period=2
max_num_sta=2007
rts_threshold=2347
fragm_threshold=2346
preamble=0
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
# Enable HT modes if you want 300Mbps+ throughput.
#ht_capab=[HT20][HT40-][HT40+][GF][SHORT-GI-20][SHORT-GI-40]
#         [TX-STBC][RX-STBC123][MAX-AMSDU-7935][DSSS_CCK-40][PSMP][LSIG-TXOP-PROT]
ht_capab=[HT20][HT40+][SHORT-GI-40][SHORT-GI-20]
vht_capab=[MAX-MPDU-11454][RXLDPC][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP0][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]
wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
### TX queue parameters
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
vht_oper_centr_freq_seg0_idx=38
vht_oper_chwidth=0
channel=36
supported_rates=10 20 55 110 60 90 120 180 240 360 480 540
ieee8021x=0
eapol_key_index_workaround=0
eap_server=0
own_ip_addr=127.0.0.1

# Error emulation settings.
ignore_probe_probability=0.000000
ignore_auth_probability=0.000000
ignore_assoc_probability=0.000000
ignore_reassoc_probability=0.000000
corrupt_gtk_rekey_mic_probability=0.000000


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-06-11 19:29 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-06-10 20:31 Anyone tried ath10k AP with 40Mhz operation? Ben Greear
2015-06-11  6:54 ` Michal Kazior
2015-06-11 13:23   ` Ben Greear
2015-06-11 19:29     ` Ben Greear

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).