[PATCH v2 0/4] v2 of the series including the null check routin

linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v2 0/4] v2 of the series including the null check routin
@ 2015-09-17 10:02 Tony Cho
  2015-09-17 10:02 ` [PATCH v2 1/4] staging: wilc1000: fix null check routine Tony Cho
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Tony Cho @ 2015-09-17 10:02 UTC (permalink / raw)
  To: gregkh
  Cc: devel, linux-wireless, johnny.kim, chris.park, rachel.kim,
	tony.cho, glen.lee, leo.kim, austin.shin, adel.noureldin,
	adham.abozaeid, Nicolas.FERRE

The previous series of 4 patches include a commit message ambiguous and
not enough to explain why the patch is made and needed. So, this version 2
includes the modification on the commit message of the patch for a null check
fix.

Leo Kim (4):
  staging: wilc1000: fix null check routine
  staging: wilc1000: remove warnings on the multiple blank lines uses
  staging: wilc1000: remove warnings line over 80 characters
  staging: wilc1000: wilc_wlan_if.h align defines

 drivers/staging/wilc1000/host_interface.c |    4 +-
 drivers/staging/wilc1000/wilc_wlan_if.h   | 1324 +++++++++++++++--------------
 2 files changed, 708 insertions(+), 620 deletions(-)

-- 
1.9.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/4] staging: wilc1000: fix null check routine
  2015-09-17 10:02 [PATCH v2 0/4] v2 of the series including the null check routin Tony Cho
@ 2015-09-17 10:02 ` Tony Cho
  2015-09-19  2:50   ` Greg KH
  2015-09-17 10:02 ` [PATCH v2 2/4] staging: wilc1000: remove warnings on the multiple blank lines uses Tony Cho
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 8+ messages in thread
From: Tony Cho @ 2015-09-17 10:02 UTC (permalink / raw)
  To: gregkh
  Cc: devel, linux-wireless, johnny.kim, chris.park, rachel.kim,
	tony.cho, glen.lee, leo.kim, austin.shin, adel.noureldin,
	adham.abozaeid, Nicolas.FERRE

From: Leo Kim <leo.kim@atmel.com>

This patch removes the potential faults which may happen when unexpectedly
getting access to invalid pointer. The pointer of pstrWFIDrv is unlikely
to be invalid. However, it is safer to return error when the invalid
memory is unfortunately accessed.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
---
 drivers/staging/wilc1000/host_interface.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
index 6fdf392..151e8c4 100644
--- a/drivers/staging/wilc1000/host_interface.c
+++ b/drivers/staging/wilc1000/host_interface.c
@@ -2403,8 +2403,10 @@ static s32 Handle_RcvdGnrlAsyncInfo(tstrWILC_WFIDrv *drvHandler, tstrRcvdGnrlAsy
 	s32 s32Err = 0;
 	tstrWILC_WFIDrv *pstrWFIDrv = (tstrWILC_WFIDrv *) drvHandler;
 
-	if (pstrWFIDrv == NULL)
+	if (unlikely(!pstrWFIDrv)) {
 		PRINT_ER("Driver handler is NULL\n");
+		return -EFAULT;
+	}
 	PRINT_D(GENERIC_DBG, "Current State = %d,Received state = %d\n", pstrWFIDrv->enuHostIFstate,
 		pstrRcvdGnrlAsyncInfo->pu8Buffer[7]);
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 1/4] staging: wilc1000: fix null check routine
  2015-09-17 10:02 ` [PATCH v2 1/4] staging: wilc1000: fix null check routine Tony Cho
@ 2015-09-19  2:50   ` Greg KH
  2015-09-21  1:52     ` Tony Cho
  0 siblings, 1 reply; 8+ messages in thread
From: Greg KH @ 2015-09-19  2:50 UTC (permalink / raw)
  To: Tony Cho
  Cc: devel, rachel.kim, chris.park, austin.shin, linux-wireless,
	johnny.kim, Nicolas.FERRE, adel.noureldin, leo.kim,
	adham.abozaeid

On Thu, Sep 17, 2015 at 07:02:17PM +0900, Tony Cho wrote:
> From: Leo Kim <leo.kim@atmel.com>
> 
> This patch removes the potential faults which may happen when unexpectedly
> getting access to invalid pointer. The pointer of pstrWFIDrv is unlikely
> to be invalid. However, it is safer to return error when the invalid
> memory is unfortunately accessed.
> 
> Signed-off-by: Leo Kim <leo.kim@atmel.com>
> Signed-off-by: Tony Cho <tony.cho@atmel.com>
> ---
>  drivers/staging/wilc1000/host_interface.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
> index 6fdf392..151e8c4 100644
> --- a/drivers/staging/wilc1000/host_interface.c
> +++ b/drivers/staging/wilc1000/host_interface.c
> @@ -2403,8 +2403,10 @@ static s32 Handle_RcvdGnrlAsyncInfo(tstrWILC_WFIDrv *drvHandler, tstrRcvdGnrlAsy
>  	s32 s32Err = 0;
>  	tstrWILC_WFIDrv *pstrWFIDrv = (tstrWILC_WFIDrv *) drvHandler;
>  
> -	if (pstrWFIDrv == NULL)
> +	if (unlikely(!pstrWFIDrv)) {

Can you measure the difference of using unlikely and not using it?  If
not, never use it, as odds are, the compiler and processor already
guessed it correctly and made the code faster.

If you can measure it, great, I'll be glad to take this patch, but you
need to show your measurements in the changelog comments.

>  		PRINT_ER("Driver handler is NULL\n");
> +		return -EFAULT;

-EFAULT is only for when we take a memory fault, which is not what is
happening here.  -ENODEV?

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 1/4] staging: wilc1000: fix null check routine
  2015-09-19  2:50   ` Greg KH
@ 2015-09-21  1:52     ` Tony Cho
  0 siblings, 0 replies; 8+ messages in thread
From: Tony Cho @ 2015-09-21  1:52 UTC (permalink / raw)
  To: Greg KH
  Cc: devel, rachel.kim, chris.park, austin.shin, linux-wireless,
	johnny.kim, Nicolas.FERRE, adel.noureldin, leo.kim,
	adham.abozaeid



On 2015년 09월 19일 11:50, Greg KH wrote:
> On Thu, Sep 17, 2015 at 07:02:17PM +0900, Tony Cho wrote:
>> From: Leo Kim <leo.kim@atmel.com>
>>
>> This patch removes the potential faults which may happen when unexpectedly
>> getting access to invalid pointer. The pointer of pstrWFIDrv is unlikely
>> to be invalid. However, it is safer to return error when the invalid
>> memory is unfortunately accessed.
>>
>> Signed-off-by: Leo Kim <leo.kim@atmel.com>
>> Signed-off-by: Tony Cho <tony.cho@atmel.com>
>> ---
>>   drivers/staging/wilc1000/host_interface.c | 4 +++-
>>   1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
>> index 6fdf392..151e8c4 100644
>> --- a/drivers/staging/wilc1000/host_interface.c
>> +++ b/drivers/staging/wilc1000/host_interface.c
>> @@ -2403,8 +2403,10 @@ static s32 Handle_RcvdGnrlAsyncInfo(tstrWILC_WFIDrv *drvHandler, tstrRcvdGnrlAsy
>>   	s32 s32Err = 0;
>>   	tstrWILC_WFIDrv *pstrWFIDrv = (tstrWILC_WFIDrv *) drvHandler;
>>   
>> -	if (pstrWFIDrv == NULL)
>> +	if (unlikely(!pstrWFIDrv)) {
> Can you measure the difference of using unlikely and not using it?  If
> not, never use it, as odds are, the compiler and processor already
> guessed it correctly and made the code faster.
>
> If you can measure it, great, I'll be glad to take this patch, but you
> need to show your measurements in the changelog comments.

I thought it twice and checked gcc documentation again. Finally, I was careless for that use.
So, I will revert it and thank you for your advice.

>>   		PRINT_ER("Driver handler is NULL\n");
>> +		return -EFAULT;
> -EFAULT is only for when we take a memory fault, which is not what is
> happening here.  -ENODEV?

This will be replaced with a correct return value. Thank you.:-)

> thanks,
>
> greg k-h


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 2/4] staging: wilc1000: remove warnings on the multiple blank lines uses
  2015-09-17 10:02 [PATCH v2 0/4] v2 of the series including the null check routin Tony Cho
  2015-09-17 10:02 ` [PATCH v2 1/4] staging: wilc1000: fix null check routine Tony Cho
@ 2015-09-17 10:02 ` Tony Cho
  2015-09-19  2:52   ` Greg KH
  2015-09-17 10:02 ` [PATCH v2 3/4] staging: wilc1000: remove warnings line over 80 characters Tony Cho
  2015-09-17 10:02 ` [PATCH v2 4/4] staging: wilc1000: wilc_wlan_if.h align defines Tony Cho
  3 siblings, 1 reply; 8+ messages in thread
From: Tony Cho @ 2015-09-17 10:02 UTC (permalink / raw)
  To: gregkh
  Cc: devel, linux-wireless, johnny.kim, chris.park, rachel.kim,
	tony.cho, glen.lee, leo.kim, austin.shin, adel.noureldin,
	adham.abozaeid, Nicolas.FERRE

From: Leo Kim <leo.kim@atmel.com>

This patch removes the warnings reported by checkpatch.pl
for using multiple blank lines.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
---
 drivers/staging/wilc1000/wilc_wlan_if.h | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
index cc92dc9..9111491 100644
--- a/drivers/staging/wilc1000/wilc_wlan_if.h
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -7,7 +7,6 @@
 /*  */
 /* ///////////////////////////////////////////////////////////////////////// */
 
-
 #ifndef WILC_WLAN_IF_H
 #define WILC_WLAN_IF_H
 
@@ -15,11 +14,9 @@
 /* #define MEMORY_STATIC */
 /* #define USE_OLD_SPI_SW */
 
-
 #include "wilc_oswrapper.h"
 #include "linux_wlan_common.h"
 
-
 /********************************************
  *
  *      Debug Flags
@@ -42,7 +39,6 @@
 #define HIF_SPI            BIT(0)
 #define HIF_SDIO_GPIO_IRQ  BIT(2)
 
-
 /********************************************
  *
  *      Tx/Rx Buffer Size Defines
@@ -156,7 +152,6 @@ struct tx_complete_data {
 	struct sk_buff *skb;
 };
 
-
 typedef void (*wilc_tx_complete_func_t)(void *, int);
 
 #define WILC_TX_ERR_NO_BUF (-2)
@@ -392,7 +387,6 @@ typedef enum {
 typedef enum {
 	WID_NIL                            = 0xffff,
 
-
 	/*  BSS Type                                                                                                                                                                            */
 	/*  --------------------------------------------------------------      */
 	/*  Configuration :  Infrastructure    Independent   Access Point                                                                               */
@@ -753,7 +747,6 @@ typedef enum {
 	/*  --------------------------------------------------------------      */
 	WID_11N_TXOP_PROT_DISABLE          = 0x00B0,
 
-
 	WID_TX_POWER_LEVEL_11N             = 0x00B1,
 
 	/* Custom Character WID list */
@@ -827,7 +820,6 @@ typedef enum {
 	WID_MEMORY_ACCESS_32BIT            = 0x201F,
 	WID_RF_REG_VAL                     = 0x2021,
 
-
 	/* NMAC Integer WID list */
 	WID_11N_PHY_ACTIVE_REG_VAL         = 0x2080,
 
@@ -883,8 +875,6 @@ typedef enum {
 	/* BugID 4951: WID toset IP address in firmware */
 	WID_IP_ADDRESS					= 0x3999,
 
-
-
 	/* Custom String WID list */
 
 	/* EMAC Binary WID list */
@@ -899,7 +889,6 @@ typedef enum {
 	/* NMAC Binary WID list */
 	WID_11N_AUTORATE_TABLE             = 0x4080,
 
-
 	/*Added here by Amr - BugID 4134*/
 	WID_SCAN_CHANNEL_LIST                      = 0x4084,
 
@@ -926,5 +915,4 @@ void wilc_bus_set_max_speed(void);
 void wilc_bus_set_default_speed(void);
 u32 wilc_get_chipid(u8 update);
 
-
 #endif
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 2/4] staging: wilc1000: remove warnings on the multiple blank lines uses
  2015-09-17 10:02 ` [PATCH v2 2/4] staging: wilc1000: remove warnings on the multiple blank lines uses Tony Cho
@ 2015-09-19  2:52   ` Greg KH
  0 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2015-09-19  2:52 UTC (permalink / raw)
  To: Tony Cho
  Cc: devel, linux-wireless, johnny.kim, chris.park, rachel.kim,
	glen.lee, leo.kim, austin.shin, adel.noureldin, adham.abozaeid,
	Nicolas.FERRE

On Thu, Sep 17, 2015 at 07:02:18PM +0900, Tony Cho wrote:
> From: Leo Kim <leo.kim@atmel.com>
> 
> This patch removes the warnings reported by checkpatch.pl
> for using multiple blank lines.
> 
> Signed-off-by: Leo Kim <leo.kim@atmel.com>
> Signed-off-by: Tony Cho <tony.cho@atmel.com>
> ---
>  drivers/staging/wilc1000/wilc_wlan_if.h | 12 ------------
>  1 file changed, 12 deletions(-)

Does not apply :(

Neither did patches 3 and 4 in this series, please rebase and resend.

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 3/4] staging: wilc1000: remove warnings line over 80 characters
  2015-09-17 10:02 [PATCH v2 0/4] v2 of the series including the null check routin Tony Cho
  2015-09-17 10:02 ` [PATCH v2 1/4] staging: wilc1000: fix null check routine Tony Cho
  2015-09-17 10:02 ` [PATCH v2 2/4] staging: wilc1000: remove warnings on the multiple blank lines uses Tony Cho
@ 2015-09-17 10:02 ` Tony Cho
  2015-09-17 10:02 ` [PATCH v2 4/4] staging: wilc1000: wilc_wlan_if.h align defines Tony Cho
  3 siblings, 0 replies; 8+ messages in thread
From: Tony Cho @ 2015-09-17 10:02 UTC (permalink / raw)
  To: gregkh
  Cc: devel, linux-wireless, johnny.kim, chris.park, rachel.kim,
	tony.cho, glen.lee, leo.kim, austin.shin, adel.noureldin,
	adham.abozaeid, Nicolas.FERRE

From: Leo Kim <leo.kim@atmel.com>

This patch removes the warnings reported by checkpatch.pl
for line over 80 characters.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
---
 drivers/staging/wilc1000/wilc_wlan_if.h | 650 ++++++++++++++++++--------------
 1 file changed, 374 insertions(+), 276 deletions(-)

diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
index 9111491..0da748a 100644
--- a/drivers/staging/wilc1000/wilc_wlan_if.h
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -1,4 +1,4 @@
-/* ////////////////////////////////////////////////////////////////////////// */
+/* ///////////////////////////////////////////////////////////////////////// */
 /*  */
 /* Copyright (c) Atmel Corporation.  All rights reserved. */
 /*  */
@@ -168,7 +168,8 @@ typedef struct {
 	int (*wlan_cfg_get)(int, u32, int, u32);
 	int (*wlan_cfg_get_value)(u32, u8 *, u32);
 	/*Bug3959: transmitting mgmt frames received from host*/
-	int (*wlan_add_mgmt_to_tx_que)(void *, u8 *, u32, wilc_tx_complete_func_t);
+	int (*wlan_add_mgmt_to_tx_que)(void *, u8 *, u32,
+				       wilc_tx_complete_func_t);
 } wilc_wlan_oup_t;
 
 /********************************************
@@ -216,16 +217,16 @@ typedef enum {
 } TX_RATE_T;
 
 typedef enum {
-	B_ONLY_MODE = 0,                                /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */
-	G_ONLY_MODE,                                    /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */
-	G_MIXED_11B_1_MODE,             /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */
-	G_MIXED_11B_2_MODE,             /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */
+	B_ONLY_MODE = 0,    /* 1, 2 M, otherwise: 5, 11 M */
+	G_ONLY_MODE,        /* 6, 12, 24 M, otherwise: 9, 18, 36, 48, 54 M */
+	G_MIXED_11B_1_MODE, /* 1, 2, 5.5, 11 M, otherwise: all on */
+	G_MIXED_11B_2_MODE, /* 1, 2, 5, 11, 6, 12, 24 M, otherwise: all on */
 } G_OPERATING_MODE_T;
 
 typedef enum {
-	G_SHORT_PREAMBLE = 0,   /* Short Preamble          */
-	G_LONG_PREAMBLE  = 1,           /* Long Preamble           */
-	G_AUTO_PREAMBLE  = 2,           /* Auto Preamble Selection */
+	G_SHORT_PREAMBLE = 0,   /* Short Preamble */
+	G_LONG_PREAMBLE  = 1,   /* Long Preamble */
+	G_AUTO_PREAMBLE  = 2,   /* Auto Preamble Selection */
 } G_PREAMBLE_T;
 
 #define MAC_CONNECTED    1
@@ -349,10 +350,10 @@ typedef enum {
 } N_OBSS_DETECTION_T;
 
 typedef enum {
-	RTS_CTS_NONHT_PROT = 0,                 /* RTS-CTS at non-HT rate      */
-	FIRST_FRAME_NONHT_PROT,         /* First frame at non-HT rate  */
-	LSIG_TXOP_PROT,                                 /* LSIG TXOP Protection        */
-	FIRST_FRAME_MIXED_PROT,         /* First frame at Mixed format */
+	RTS_CTS_NONHT_PROT = 0,    /* RTS-CTS at non-HT rate */
+	FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
+	LSIG_TXOP_PROT,                    /* LSIG TXOP Protection */
+	FIRST_FRAME_MIXED_PROT,  /* First frame at Mixed format */
 } N_PROTECTION_TYPE_T;
 
 typedef enum {
@@ -387,237 +388,299 @@ typedef enum {
 typedef enum {
 	WID_NIL                            = 0xffff,
 
-	/*  BSS Type                                                                                                                                                                            */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration :  Infrastructure    Independent   Access Point                                                                               */
-	/*  Values to set :         0               1            2                                                                                                                      */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  BSS Type
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Infrastructure    Independent   Access Point
+	 *  Values to set :         0               1            2
+	 *  -----------------------------------------------------------
+	*/
 	WID_BSS_TYPE						= 0x0000,
 
-	/*  Transmit Rate                                                                                                                                                                       */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration :  1  2  5.5  11  6  9  12  18  24  36  48  54                                                                                */
-	/*  Values to set :  1  2  5  11  6  9  12  18  24  36  48  54                                                                                  */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  Transmit Rate
+	 *  -----------------------------------------------------------
+	 *  Configuration :  1  2  5.5  11  6  9  12  18  24  36  48  54
+	 *  Values to set :  1  2     5  11  6  9  12  18  24  36  48  54
+	 *  -----------------------------------------------------------
+	 */
 	WID_CURRENT_TX_RATE			= 0x0001,
 
-	/*  Channel                                                                                                                                                                                                     */
-	/*  -------------------------------------------------------------------         */
-	/*  Configuration(g) :  1  2  3  4  5  6  7  8   9   10  11  12  13  14                                                                                         */
-	/*  Values to set    :  1  2  3  4  5  6  7  8   9   10  11  12  13  14                                                                                         */
-	/*  --------------------------------------------------------------------        */
+	/*
+	 *  Channel
+	 *  -----------------------------------------------------------
+	 *  Configuration(g) :  1  2  3  4  5  6  7  8   9   10  11  12  13  14
+	 *  Values to set    :  1  2  3  4  5  6  7  8   9   10  11  12  13  14
+	 *  -----------------------------------------------------------
+	 */
 	WID_CURRENT_CHANNEL			= 0x0002,
 
-	/*  Preamble                                                                                                                                                                            */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration :    short    long   Auto                                                                                                                             */
-	/*  Values to set :       0         1         2                                                                                                                                 */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  Preamble
+	 *  -----------------------------------------------------------
+	 *  Configuration :    short    long   Auto
+	 *  Values to set :       0         1         2
+	 *  -----------------------------------------------------------
+	 */
 	WID_PREAMBLE						= 0x0003,
 
-	/*  11g operating mode (ignored if 11g not present)                                                                                                     */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)                                                                 */
-	/*  Values to set :          1               2               3                                                                                                                  */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  11g operating mode (ignored if 11g not present)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)
+	 *  Values to set :          1               2               3
+	 *  -----------------------------------------------------------
+	 */
 	WID_11G_OPERATING_MODE            = 0x0004,
 
-	/*  Mac status (response only)                                                                                                                                                                  */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration :   disconnect  connect                                                                                                                                               */
-	/*  Values to get :          0               1                                                                                                                                          */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  Mac status (response only)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   disconnect  connect
+	 *  Values to get :          0               1
+	 *  -----------------------------------------------------------
+	 */
 	WID_STATUS						= 0x0005,
 
-	/*  Scan type                                                                                                                                                                           */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration :   Passive Scanning   Active Scanning                                                                                        */
-	/*  Values to set :                  0                 1                                                                                                                                */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  Scan type
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Passive Scanning   Active Scanning
+	 *  Values to set :                  0                 1
+	 *  -----------------------------------------------------------
+	 */
 	WID_SCAN_TYPE                      = 0x0007,
 
-	/*  Key Id (WEP default key Id)                                                                                                                                                 */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration :   Any value between 0 to 3                                                                                                                  */
-	/*  Values to set :	Same value. Default is 0                                                                                                                                */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  Key Id (WEP default key Id)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 0 to 3
+	 *  Values to set :	Same value. Default is 0
+	 *  -----------------------------------------------------------
+	 */
 	WID_KEY_ID                         = 0x0009,
 
-	/*  QoS Enable                                                                                                                                                                          */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration :   QoS Disable   WMM Enable                                                                                                          */
-	/*  Values to set :   0             1                                                                                                                                                   */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  QoS Enable
+	 *  -----------------------------------------------------------
+	 *  Configuration :   QoS Disable   WMM Enable
+	 *  Values to set :   0             1
+	 *  -----------------------------------------------------------
+	 */
 	WID_QOS_ENABLE                     = 0x000A,
 
-	/*  Power Management                                                                                                                                                                    */
-	/*  ------------------------------------------------------------------  */
-	/*  Configuration :   NO_POWERSAVE   MIN_POWERSAVE   MAX_POWERSAVE                                              */
-	/*  Values to set :   0              1               2                                                                                                                                  */
-	/*  ------------------------------------------------------------------   */
+	/*
+	 *  Power Management
+	 *  -----------------------------------------------------------
+	 *  Configuration :   NO_POWERSAVE   MIN_POWERSAVE   MAX_POWERSAVE
+	 *  Values to set :   0              1               2
+	 *  -----------------------------------------------------------
+	 */
 	WID_POWER_MANAGEMENT               = 0x000B,
 
-	/*  WEP/802 11I Configuration                                            */
-	/*  ------------------------------------------------------------------  */
-	/*  Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP                                */
-	/*  Values (0x)   :   00                03    07        29                      49                      31                      51                                      */
-	/*                                                                                                                                                                                                              */
-	/*  Configuration : WPA-AES+TKIP RSN-AES+TKIP                                                                                                                   */
-	/*  Values (0x)   :      69                             71                                                                                                                              */
-	/*  ------------------------------------------------------------------   */
+	/*
+	 *  WEP/802 11I Configuration
+	 *  -----------------------------------------------------------
+	 *  Conf : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
+	 *  Val(0x) : 00    03     07        29        49          31       51
+	 *  -----------------------------------------------------------
+	 *  Configuration : WPA-AES+TKIP RSN-AES+TKIP
+	 *  Values (0x)   :      69                             71
+	 *  -----------------------------------------------------------
+	 */
 	WID_11I_MODE                       = 0x000C,
 
-	/*  WEP Configuration: Used in BSS STA mode only when WEP is enabled     */
-	/*  ------------------------------------------------------------------   */
-	/*  Configuration : Open System  Shared Key  Any Type  |   802.1x Auth   */
-	/*  Values (0x)   :    01             02         03    |      BIT2       */
-	/*  ------------------------------------------------------------------   */
+	/*
+	 *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
+	 *  -----------------------------------------------------------
+	 *  Configuration : Open System  Shared Key  Any Type  |   802.1x Auth
+	 *  Values (0x)   :    01             02         03     |      BIT2
+	 *  -----------------------------------------------------------
+	 */
 	WID_AUTH_TYPE                      = 0x000D,
 
-	/*  Site Survey Type                                                                                                                                                                    */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration       :  Values to set                                                                                                                                */
-	/*  Survey 1 Channel    :  0                                                                                                                                                    */
-	/*  survey all Channels :  1                                                                                                                                                    */
-	/*  Disable Site Survey :  2                                                                                                                                                    */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  Site Survey Type
+	 *  -----------------------------------------------------------
+	 *  Configuration       :  Values to set
+	 *  Survey 1 Channel    :  0
+	 *  survey all Channels :  1
+	 *  Disable Site Survey :  2
+	 *  -----------------------------------------------------------
+	 */
 	WID_SITE_SURVEY                    = 0x000E,
 
-	/*  Listen Interval                                                      */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :   Any value between 1 to 255                         */
-	/*  Values to set :   Same value. Default is 3                           */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  Listen Interval
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 1 to 255
+	 *  Values to set :   Same value. Default is 3
+	 *  -----------------------------------------------------------
+	 */
 	WID_LISTEN_INTERVAL                = 0x000F,
 
-	/*  DTIM Period                                                          */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :   Any value between 1 to 255                         */
-	/*  Values to set :   Same value. Default is 3                           */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  DTIM Period
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 1 to 255
+	 *  Values to set :   Same value. Default is 3
+	 *  -----------------------------------------------------------
+	 */
 	WID_DTIM_PERIOD                    = 0x0010,
 
-	/*  ACK Policy                                                           */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :   Normal Ack            No Ack                       */
-	/*  Values to set :       0                   1                          */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  ACK Policy
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Normal Ack            No Ack
+	 *  Values to set :       0                   1
+	 *  -----------------------------------------------------------
+	 */
 	WID_ACK_POLICY                     = 0x0011,
 
-	/*  Reset MAC (Set only)                                                           */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :   Don't Reset	Reset	No Request                       */
-	/*  Values to set :       0                   1			2                          */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  Reset MAC (Set only)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Don't Reset	Reset	No Request
+	 *  Values to set :       0                   1              2
+	 *  -----------------------------------------------------------
+	 */
 	WID_RESET                          = 0x0012,
 
-	/*  Broadcast SSID Option: Setting this will adhere to "" SSID element   */
-	/*  ------------------------------------------------------------------   */
-	/*  Configuration :   Enable             Disable                         */
-	/*  Values to set :   1                  0                               */
-	/*  ------------------------------------------------------------------   */
+	/*
+	 *  Broadcast SSID Option: Setting this will adhere to "" SSID element
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Enable             Disable
+	 *  Values to set :   1                  0
+	 *  -----------------------------------------------------------
+	 */
 	WID_BCAST_SSID                     = 0x0015,
 
-	/*  Disconnect (Station)                                                                                                                                                                                                                */
-	/*  ------------------------------------------------------------------  */
-	/*  Configuration :   Association ID                                                                                                                                                    */
-	/*  Values to set :   Association ID                                                                                                                                                    */
-	/*  ------------------------------------------------------------------  */
+	/*
+	 *  Disconnect (Station)
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Association ID
+	 *  Values to set :   Association ID
+	 *  -----------------------------------------------------------
+	 */
 	WID_DISCONNECT                     = 0x0016,
 
-	/*  11a Tx Power Level                                                   */
-	/*  -------------------------------------------------------------------- */
-	/*  Configuration : Sets TX Power (Higher the value greater the power)   */
-	/*  Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
-	/*  -------------------------------------------------------------------- */
+	/*
+	 *  11a Tx Power Level
+	 *  -----------------------------------------------------------
+	 *  Conf : Sets TX Power (Higher the value greater the power)
+	 *  Values : Any value between 0 and 63 (inclusive; Default is 48)
+	 *  -----------------------------------------------------------
+	 */
 	WID_TX_POWER_LEVEL_11A             = 0x0018,
 
-	/*  Group Key Update Policy Selection                                    */
-	/*  -------------------------------------------------------------------- */
-	/*  Configuration : Disabled  timeBased  packetBased   timePacketBased   */
-	/*  Values to set :   1            2          3               4          */
-	/*  -------------------------------------------------------------------- */
+	/*
+	 *  Group Key Update Policy Selection
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disabled  timeBased  packetBased   timePacketBased
+	 *  Values to set :   1            2          3               4
+	 *  -----------------------------------------------------------
+	 */
 	WID_REKEY_POLICY                   = 0x0019,
 
-	/*  Allow Short Slot                                                     */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration : Disallow Short Slot      Allow Short Slot            */
-	/*              (Enable Only Long Slot) (Enable Short Slot if applicable)*/
-	/*  Values to set :    0         1                                       */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  Allow Short Slot
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disallow Short Slot      Allow Short Slot
+	 *      (Enable Only Long Slot) (Enable Short Slot if applicable)
+	 *  Values to set :    0         1
+	 *  -----------------------------------------------------------
+	 */
 	WID_SHORT_SLOT_ALLOWED             = 0x001A,
 
 	WID_PHY_ACTIVE_REG                 = 0x001B,
 
-	/*  11b Tx Power Level                                                   */
-	/*  -------------------------------------------------------------------- */
-	/*  Configuration : Sets TX Power (Higher the value greater the power)   */
-	/*  Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
-	/*  -------------------------------------------------------------------- */
+	/*
+	 *  11b Tx Power Level
+	 *  -----------------------------------------------------------
+	 *  Configuration : Sets TX Power (Higher the value greater the power)
+	 *  Values to set : Any value between 0 and 63 (inclusive; Default 48)
+	 *  -----------------------------------------------------------
+	 */
 	WID_TX_POWER_LEVEL_11B             = 0x001D,
 
-	/*  Scan Request                                                                                                                                                                                        */
-	/*  --------------------------------------------------------------------        */
-	/*  Configuration : Request default scan                                                                                                                                                                        */
-	/*  Values to set : 0																													*/
-	/*  -------------------------------------------------------------------- */
+	/*
+	 *  Scan Request
+	 *  -----------------------------------------------------------
+	 *  Configuration : Request default scan
+	 *  Values to set : 0
+	 *  -----------------------------------------------------------
+	 */
 	WID_START_SCAN_REQ                 = 0x001E,
 
-	/*  Rssi (get only)                                                                                                                                                                                     */
-	/*  --------------------------------------------------------------------        */
-	/*  Configuration :                                                                                                                                                                     */
-	/*  Values to get : Rssi value																													*/
-	/*  -------------------------------------------------------------------- */
+	/*
+	 *  Rssi (get only)
+	 *  -----------------------------------------------------------
+	 *  Configuration :
+	 *  Values to get : Rssi value
+	 *  -----------------------------------------------------------
+	 */
 	WID_RSSI                           = 0x001F,
 
-	/*  Join Request                                                                                                                                                                                        */
-	/*  --------------------------------------------------------------------        */
-	/*  Configuration : Request to join                                                                                                                                                                     */
-	/*  Values to set : index of scan result																					*/
-	/*  -------------------------------------------------------------------- */
+	/*
+	 *  Join Request
+	 *  -----------------------------------------------------------
+	 *  Configuration : Request to join
+	 *  Values to set : index of scan result
+	 *  -----------------------------------------------------------
+	 */
 	WID_JOIN_REQ                       = 0x0020,
 
-	WID_LINKSPEED								= 0x0026,
+	WID_LINKSPEED			  = 0x0026,
 
-	/*  Enable User Control of TX Power                                      */
-	/*  -------------------------------------------------------------------- */
-	/*  Configuration : Disable                  Enable                      */
-	/*  Values to set :    0                       1                         */
-	/*  -------------------------------------------------------------------- */
+	/*
+	 *  Enable User Control of TX Power
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    0                       1
+	 *  -----------------------------------------------------------
+	 */
 	WID_USER_CONTROL_ON_TX_POWER       = 0x0027,
 
 	WID_MEMORY_ACCESS_8BIT             = 0x0029,
 
-	/*  Enable Auto RX Sensitivity feature                                                                                                                                                          */
-	/*  --------------------------------------------------------------------        */
-	/*  Configuration : Disable                  Enable                                                                                                                                     */
-	/*  Values to set :    0                       1                                                                                                                                                        */
-	/*  --------------------------------------------------------------------        */
+	/*
+	 *  Enable Auto RX Sensitivity feature
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    0                       1
+	 *  -----------------------------------------------------------
+	 */
 	WID_AUTO_RX_SENSITIVITY            = 0x0032,
 
-	/*  Receive Buffer Based Ack                                                                                                                                                                            */
-	/*  --------------------------------------------------------------------        */
-	/*  Configuration : Disable                  Enable                                                                                                                                     */
-	/*  Values to set :    0                       1                                                                                                                                                        */
-	/*  --------------------------------------------------------------------        */
+	/*
+	 *  Receive Buffer Based Ack
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    0                       1
+	 *  -----------------------------------------------------------
+	 */
 	WID_DATAFLOW_CONTROL               = 0x0033,
 
-	/*  Scan Filter                                                                                                                                                                                 */
-	/*  --------------------------------------------------------------------        */
-	/*  Configuration : Class		No filter       AP only			Station Only                                                                            */
-	/*  Values to set :                                     0                     1                     2                                                                                           */
-	/*  Configuration : Priority    High Rssi       Low Rssi		Detect													*/
-	/*  Values to set :                                     0                  0x4                  0x08                                                                                    */
-	/*  Configuration : Channel     filter off              filter on																	*/
-	/*  Values to set :                                     0                  0x10                                                                                                                 */
-	/*  --------------------------------------------------------------------        */
+	/*
+	 *  Scan Filter
+	 *  -----------------------------------------------------------
+	 *  Configuration : Class No filter   AP only  Station Only
+	 *  Values to set :             0             1               2
+	 *  Configuration : Priority   High Rssi   Low Rssi   Detect
+	 *  Values to set :                 0              0x4        0x08
+	 *  Configuration : Channel  filter off        filter on
+	 *  Values to set :                 0                  0x10
+	 *  -----------------------------------------------------------
+	 */
 	WID_SCAN_FILTER                    = 0x0036,
 
-	/*  Link Loss Threshold (measure in the beacon period)                                                                          */
-	/*  --------------------------------------------------------------------        */
-	/*  Configuration : Any value between 10 and 254 (Set to 255 to disable it)								*/
-	/*  Values to set : Same value. Default is 10																				*/
-	/*  --------------------------------------------------------------------        */
+	/*
+	 *  Link Loss Threshold (measure in the beacon period)
+	 *  -----------------------------------------------------------
+	 *  Configuration : Any value 10 ~ 254 (Set to 255 to disable it)
+	 *  Values to set : Same value. Default is 10
+	 *  -----------------------------------------------------------
+	 */
 	WID_LINK_LOSS_THRESHOLD            = 0x0037,
 
 	/*BugID_4978*/
@@ -626,103 +689,127 @@ typedef enum {
 	/* NMAC Character WID list */
 	WID_WPS_START                      = 0x0043,
 
-	/*  Protection mode for MAC                                              */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  Auto  No protection  ERP    HT    GF                */
-	/*  Values to set :  0     1              2      3     4                 */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  Protection mode for MAC
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Auto  No protection  ERP    HT    GF
+	 *  Values to set :  0     1              2      3     4
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_PROT_MECH                  = 0x0080,
 
-	/*  ERP Protection type for MAC                                          */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  Self-CTS   RTS-CTS                                  */
-	/*  Values to set :  0          1                                        */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  ERP Protection type for MAC
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Self-CTS   RTS-CTS
+	 *  Values to set :  0          1
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_ERP_PROT_TYPE              = 0x0081,
 
-	/*  HT Option Enable                                                     */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :   HT Enable          HT Disable                       */
-	/*  Values to set :   1                  0                               */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  HT Option Enable
+	 *  -----------------------------------------------------------
+	 *  Configuration :   HT Enable          HT Disable
+	 *  Values to set :   1                  0
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_ENABLE                     = 0x0082,
 
-	/*  11n Operating mode (Note that 11g operating mode will also be        */
-	/*  used in addition to this, if this is set to HT Mixed mode)           */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz          */
-	/*  Values to set :     1         2               3                         */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  11n Operating mode (Note that 11g operating mode will also be
+	 *  used in addition to this, if this is set to HT Mixed mode)
+	 *  -----------------------------------------------------------
+	 *   Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz
+	 *  Values to set :     1         2               3
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_OPERATING_MODE             = 0x0083,
 
-	/*  11n OBSS non-HT STA Detection flag                                   */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  Do not detect                                       */
-	/*  Values to set :  0                                                   */
-	/*  Configuration :  Detect, do not protect or report                    */
-	/*  Values to set :  1                                                   */
-	/*  Configuration :  Detect, protect and do not report                   */
-	/*  Values to set :  2                                                   */
-	/*  Configuration :  Detect, protect and report to other BSS             */
-	/*  Values to set :  3                                                   */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  11n OBSS non-HT STA Detection flag
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Do not detect
+	 *  Values to set :  0
+	 *  Configuration :  Detect, do not protect or report
+	 *  Values to set :  1
+	 *  Configuration :  Detect, protect and do not report
+	 *  Values to set :  2
+	 *  Configuration :  Detect, protect and report to other BSS
+	 *  Values to set :  3
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_OBSS_NONHT_DETECTION       = 0x0084,
 
-	/*  11n HT Protection Type                                               */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate       */
-	/*  Values to set :  0         1                                         */
-	/*  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt         */
-	/*  Values to set :  2         3                                         */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  11n HT Protection Type
+	 *  -----------------------------------------------------------
+	 *  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate
+	 *  Values to set :  0         1
+	 *  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt
+	 *  Values to set :  2         3
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_HT_PROT_TYPE               = 0x0085,
 
-	/*  11n RIFS Protection Enable Flag                                      */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  Disable    Enable                                   */
-	/*  Values to set :  0          1                                        */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  11n RIFS Protection Enable Flag
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Disable    Enable
+	 *  Values to set :  0          1
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_RIFS_PROT_ENABLE           = 0x0086,
 
-	/*  SMPS Mode                                                            */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)       */
-	/*  Values to set :  1        2         3                                */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  SMPS Mode
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)
+	 *  Values to set :  1        2         3
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_SMPS_MODE                  = 0x0087,
 
-	/*  Current transmit MCS                                                 */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  MCS Index for data rate                                                                                                                    */
-	/*  Values to set :  0 to 7                                                                                                                                                     */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  Current transmit MCS
+	 *  -----------------------------------------------------------
+	 *  Configuration :  MCS Index for data rate
+	 *  Values to set :  0 to 7
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_CURRENT_TX_MCS             = 0x0088,
 
 	WID_11N_PRINT_STATS                = 0x0089,
 
-	/*  11n Short GI Enable Flag                                                                                                                                                    */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  Disable    Enable                                                                                                                                  */
-	/*  Values to set :  0          1                                                                                                                                                       */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  11n Short GI Enable Flag
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Disable    Enable
+	 *  Values to set :  0          1
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_SHORT_GI_ENABLE            = 0x008D,
 
-	/*  11n RIFS Enable Flag                                                                                                                                                */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  Disable    Enable                                                                                                                                  */
-	/*  Values to set :  0          1                                                                                                                                                       */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  11n RIFS Enable Flag
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Disable    Enable
+	 *  Values to set :  0          1
+	 *  -----------------------------------------------------------
+	 */
 	WID_RIFS_MODE                      = 0x0094,
 
-	/*  TX Abort Feature                                                                                                                                                    */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :  Disable Self CTS    Enable Self CTS                                                                                                        */
-	/*  Values to set :             0                                       1                                                                                                                               */
-	/*  Configuration :  Disable TX Abort    Enable TX Abort                                                                                                        */
-	/*  Values to set :             2                                       3                                                                                                                               */
-	/*  Configuration :  Enable HW TX Abort Enable SW TX Abort                                                                                              */
-	/*  Values to set :             4                                       5                                                                                                                               */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  TX Abort Feature
+	 *  -----------------------------------------------------------
+	 *  Configuration :  Disable Self CTS    Enable Self CTS
+	 *  Values to set :             0                      1
+	 *  Configuration :  Disable TX Abort    Enable TX Abort
+	 *  Values to set :             2                      3
+	 *  Configuration :  Enable HW TX Abort Enable SW TX Abort
+	 *  Values to set :             4                      5
+	 *  -----------------------------------------------------------
+	 */
 	WID_TX_ABORT_CONFIG                = 0x00A1,
 
 	WID_REG_TSSI_11B_VALUE             = 0x00A6,
@@ -733,18 +820,22 @@ typedef enum {
 	WID_DSCR_TSSI_11G_VALUE            = 0x00AB,
 	WID_DSCR_TSSI_11N_VALUE            = 0x00AC,
 
-	/*  Immediate Block-Ack Support                                          */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration : Disable                  Enable                      */
-	/*  Values to set :    0                       1                         */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  Immediate Block-Ack Support
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    0                       1
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_IMMEDIATE_BA_ENABLED       = 0x00AF,
 
-	/*  TXOP Disable Flag                                                                                                                                                                   */
-	/*  --------------------------------------------------------------      */
-	/*  Configuration : Disable                  Enable                                                                                                                     */
-	/*  Values to set :    1                        0                                                                                                                               */
-	/*  --------------------------------------------------------------      */
+	/*
+	 *  TXOP Disable Flag
+	 *  -----------------------------------------------------------
+	 *  Configuration : Disable                  Enable
+	 *  Values to set :    1                        0
+	 *  -----------------------------------------------------------
+	 */
 	WID_11N_TXOP_PROT_DISABLE          = 0x00B0,
 
 	WID_TX_POWER_LEVEL_11N             = 0x00B1,
@@ -758,19 +849,23 @@ typedef enum {
 	WID_DEL_BEACON					= 0x00CA,
 
 	WID_LOGTerminal_Switch					= 0x00CD,
-	/* EMAC Short WID list */
-	/*  RTS Threshold                                                        */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :   Any value between 256 to 2347                      */
-	/*  Values to set :   Same value. Default is 2347                        */
-	/*  --------------------------------------------------------------       */
+	/*  EMAC Short WID list */
+	/*  RTS Threshold */
+	/*
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 256 to 2347
+	 *  Values to set :   Same value. Default is 2347
+	 *  -----------------------------------------------------------
+	 */
 	WID_RTS_THRESHOLD                  = 0x1000,
 
-	/*  Fragmentation Threshold                                              */
-	/*  --------------------------------------------------------------       */
-	/*  Configuration :   Any value between 256 to 2346                      */
-	/*  Values to set :   Same value. Default is 2346                        */
-	/*  --------------------------------------------------------------       */
+	/*
+	 *  Fragmentation Threshold
+	 *  -----------------------------------------------------------
+	 *  Configuration :   Any value between 256 to 2346
+	 *  Values to set :   Same value. Default is 2346
+	 *  -----------------------------------------------------------
+	 */
 	WID_FRAG_THRESHOLD                 = 0x1001,
 
 	WID_SHORT_RETRY_LIMIT              = 0x1002,
@@ -855,9 +950,9 @@ typedef enum {
 	WID_ASSOC_REQ_INFO                 = 0x301F,
 	WID_ASSOC_RES_INFO                 = 0x3020,
 	WID_MANUFACTURER                   = 0x3026, /*Added for CAPI tool */
-	WID_MODEL_NAME                                     = 0x3027, /*Added for CAPI tool */
+	WID_MODEL_NAME                       = 0x3027, /*Added for CAPI tool */
 	WID_MODEL_NUM                      = 0x3028, /*Added for CAPI tool */
-	WID_DEVICE_NAME                                     = 0x3029, /*Added for CAPI tool */
+	WID_DEVICE_NAME                      = 0x3029, /*Added for CAPI tool */
 
 	/* NMAC String WID list */
 	WID_11N_P_ACTION_REQ               = 0x3080,
@@ -869,7 +964,10 @@ typedef enum {
 	WID_REMAIN_ON_CHAN  = 0x3996,
 	/*BugID_4156*/
 	WID_SSID_PROBE_REQ = 0x3997,
-	/*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/
+	/*
+	 * BugID_4124 WID to trigger modified Join Request using
+	 * SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)
+	 */
 	WID_JOIN_REQ_EXTENDED		 = 0x3998,
 
 	/* BugID 4951: WID toset IP address in firmware */
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 4/4] staging: wilc1000: wilc_wlan_if.h align defines
  2015-09-17 10:02 [PATCH v2 0/4] v2 of the series including the null check routin Tony Cho
                   ` (2 preceding siblings ...)
  2015-09-17 10:02 ` [PATCH v2 3/4] staging: wilc1000: remove warnings line over 80 characters Tony Cho
@ 2015-09-17 10:02 ` Tony Cho
  3 siblings, 0 replies; 8+ messages in thread
From: Tony Cho @ 2015-09-17 10:02 UTC (permalink / raw)
  To: gregkh
  Cc: devel, linux-wireless, johnny.kim, chris.park, rachel.kim,
	tony.cho, glen.lee, leo.kim, austin.shin, adel.noureldin,
	adham.abozaeid, Nicolas.FERRE

From: Leo Kim <leo.kim@atmel.com>

This patch fix alignment of some defines in wilc_wlan_if.h.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
---
 drivers/staging/wilc1000/wilc_wlan_if.h | 580 ++++++++++++++++----------------
 1 file changed, 290 insertions(+), 290 deletions(-)

diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
index 0da748a..93ab3c7 100644
--- a/drivers/staging/wilc1000/wilc_wlan_if.h
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -23,11 +23,11 @@
  *
  ********************************************/
 
-#define N_INIT		0x00000001
-#define N_ERR		0x00000002
-#define N_TXQ		0x00000004
-#define N_INTR		0x00000008
-#define N_RXQ		0x00000010
+#define N_INIT			0x00000001
+#define N_ERR			0x00000002
+#define N_TXQ			0x00000004
+#define N_INTR			0x00000008
+#define N_RXQ			0x00000010
 
 /********************************************
  *
@@ -35,9 +35,9 @@
  *
  ********************************************/
 
-#define HIF_SDIO           (0)
-#define HIF_SPI            BIT(0)
-#define HIF_SDIO_GPIO_IRQ  BIT(2)
+#define HIF_SDIO		(0)
+#define HIF_SPI			BIT(0)
+#define HIF_SDIO_GPIO_IRQ	BIT(2)
 
 /********************************************
  *
@@ -45,8 +45,8 @@
  *
  ********************************************/
 
-#define CE_TX_BUFFER_SIZE (64 * 1024)
-#define CE_RX_BUFFER_SIZE (384 * 1024)
+#define CE_TX_BUFFER_SIZE	(64 * 1024)
+#define CE_RX_BUFFER_SIZE	(384 * 1024)
 
 /********************************************
  *
@@ -55,21 +55,21 @@
  ********************************************/
 
 typedef struct {
-	u32 read_write: 1;
-	u32 function: 3;
-	u32 raw: 1;
-	u32 address: 17;
-	u32 data: 8;
+	u32 read_write:		1;
+	u32 function:		3;
+	u32 raw:		1;
+	u32 address:		17;
+	u32 data:		8;
 } sdio_cmd52_t;
 
 typedef struct {
 	/* struct { */
-	u32 read_write: 1;
-	u32 function: 3;
-	u32 block_mode: 1;
-	u32 increment: 1;
-	u32 address: 17;
-	u32 count: 9;
+	u32 read_write:		1;
+	u32 function:		3;
+	u32 block_mode:		1;
+	u32 increment:		1;
+	u32 address:		17;
+	u32 count:		9;
 	/* } bit; */
 	u8 *buffer;
 	u32 block_size;
@@ -108,10 +108,10 @@ typedef struct {
 typedef struct {
 	void (*mac_indicate)(int);
 } wilc_wlan_indicate_func_t;
-#define WILC_MAC_INDICATE_STATUS		0x1
-#define WILC_MAC_STATUS_INIT	-1
-#define WILC_MAC_STATUS_READY 0
-#define WILC_MAC_STATUS_CONNECT 1
+#define WILC_MAC_INDICATE_STATUS	0x1
+#define WILC_MAC_STATUS_INIT		-1
+#define WILC_MAC_STATUS_READY		0
+#define WILC_MAC_STATUS_CONNECT		1
 
 #define WILC_MAC_INDICATE_SCAN		0x2
 
@@ -154,7 +154,7 @@ struct tx_complete_data {
 
 typedef void (*wilc_tx_complete_func_t)(void *, int);
 
-#define WILC_TX_ERR_NO_BUF (-2)
+#define WILC_TX_ERR_NO_BUF	(-2)
 
 typedef struct {
 	int (*wlan_firmware_download)(const u8 *, u32);
@@ -181,154 +181,154 @@ typedef struct {
 #define MAX_SSID_LEN            33
 #define MAX_RATES_SUPPORTED     12
 
-#define INFINITE_SLEEP_TIME		((u32)0xFFFFFFFF)
+#define INFINITE_SLEEP_TIME	((u32)0xFFFFFFFF)
 
 #ifdef WILC_PARSE_SCAN_IN_HOST
 typedef enum {
-	SUPP_RATES_IE = 1,
-	EXT_SUPP_RATES_IE = 50,
-	HT_CAPABILITY_IE = 45,
-	RSN_IE = 48,
-	WPA_IE = 221,
-	WMM_IE = 221,
-	P2P_IE = 221,
+	SUPP_RATES_IE		= 1,
+	EXT_SUPP_RATES_IE	= 50,
+	HT_CAPABILITY_IE	= 45,
+	RSN_IE			= 48,
+	WPA_IE			= 221,
+	WMM_IE			= 221,
+	P2P_IE			= 221,
 } BEACON_IE;
 #endif
 typedef enum {
-	INFRASTRUCTURE = 0,
+	INFRASTRUCTURE		= 0,
 	INDEPENDENT,
 	AP,
 } BSSTYPE_T;
 
 typedef enum {
-	RATE_AUTO = 0,
-	RATE_1MB = 1,
-	RATE_2MB = 2,
-	RATE_5MB = 5,
-	RATE_6MB = 6,
-	RATE_9MB = 9,
-	RATE_11MB = 11,
-	RATE_12MB = 12,
-	RATE_18MB = 18,
-	RATE_24MB = 24,
-	RATE_26MB = 36,
-	RATE_48MB = 48,
-	RATE_54MB = 54
+	RATE_AUTO		= 0,
+	RATE_1MB		= 1,
+	RATE_2MB		= 2,
+	RATE_5MB		= 5,
+	RATE_6MB		= 6,
+	RATE_9MB		= 9,
+	RATE_11MB		= 11,
+	RATE_12MB		= 12,
+	RATE_18MB		= 18,
+	RATE_24MB		= 24,
+	RATE_26MB		= 36,
+	RATE_48MB		= 48,
+	RATE_54MB		= 54
 } TX_RATE_T;
 
 typedef enum {
-	B_ONLY_MODE = 0,    /* 1, 2 M, otherwise: 5, 11 M */
-	G_ONLY_MODE,        /* 6, 12, 24 M, otherwise: 9, 18, 36, 48, 54 M */
-	G_MIXED_11B_1_MODE, /* 1, 2, 5.5, 11 M, otherwise: all on */
-	G_MIXED_11B_2_MODE, /* 1, 2, 5, 11, 6, 12, 24 M, otherwise: all on */
+	B_ONLY_MODE		= 0,    /* 1, 2 M, otherwise 5, 11 M */
+	G_ONLY_MODE,			/* 6,12,24 otherwise 9,18,36,48,54 */
+	G_MIXED_11B_1_MODE,		/* 1,2,5.5,11 otherwise all on */
+	G_MIXED_11B_2_MODE,		/* 1,2,5,11,6,12,24 otherwise all on */
 } G_OPERATING_MODE_T;
 
 typedef enum {
-	G_SHORT_PREAMBLE = 0,   /* Short Preamble */
-	G_LONG_PREAMBLE  = 1,   /* Long Preamble */
-	G_AUTO_PREAMBLE  = 2,   /* Auto Preamble Selection */
+	G_SHORT_PREAMBLE	= 0,	/* Short Preamble */
+	G_LONG_PREAMBLE		= 1,	/* Long Preamble */
+	G_AUTO_PREAMBLE		= 2,	/* Auto Preamble Selection */
 } G_PREAMBLE_T;
 
-#define MAC_CONNECTED    1
-#define MAC_DISCONNECTED 0
+#define MAC_CONNECTED		1
+#define MAC_DISCONNECTED	0
 
 /*bug3819: */
 #define SCAN_DONE		TRUE
 typedef enum {
-	PASSIVE_SCAN = 0,
-	ACTIVE_SCAN  = 1,
+	PASSIVE_SCAN		= 0,
+	ACTIVE_SCAN		= 1,
 } SCANTYPE_T;
 
 typedef enum {
-	NO_POWERSAVE     = 0,
-	MIN_FAST_PS      = 1,
-	MAX_FAST_PS      = 2,
-	MIN_PSPOLL_PS    = 3,
-	MAX_PSPOLL_PS    = 4
+	NO_POWERSAVE		= 0,
+	MIN_FAST_PS		= 1,
+	MAX_FAST_PS		= 2,
+	MIN_PSPOLL_PS		= 3,
+	MAX_PSPOLL_PS		= 4
 } USER_PS_MODE_T;
 
 typedef enum {
-	CHIP_WAKEDUP			= 0,
+	CHIP_WAKEDUP		= 0,
 	CHIP_SLEEPING_AUTO      = 1,
-	CHIP_SLEEPING_MANUAL  = 2
+	CHIP_SLEEPING_MANUAL	= 2
 } CHIP_PS_STATE_T;
 
 typedef enum {
-	ACQUIRE_ONLY                             = 0,
+	ACQUIRE_ONLY            = 0,
 	ACQUIRE_AND_WAKEUP	= 1,
 } BUS_ACQUIRE_T;
 
 typedef enum {
-	RELEASE_ONLY				= 0,
-	RELEASE_ALLOW_SLEEP		= 1,
+	RELEASE_ONLY		= 0,
+	RELEASE_ALLOW_SLEEP	= 1,
 } BUS_RELEASE_T;
 
 typedef enum {
-	NO_SECURITY = 0,
-	WEP_40 = 0x3,
-	WEP_104 = 0x7,
-	WPA_AES = 0x29,
-	WPA_TKIP = 0x49,
-	WPA_AES_TKIP = 0x69,            /* Aes or Tkip */
-	WPA2_AES = 0x31,
-	WPA2_TKIP = 0x51,
-	WPA2_AES_TKIP = 0x71,   /* Aes or Tkip */
+	NO_SECURITY		= 0,
+	WEP_40			= 0x3,
+	WEP_104			= 0x7,
+	WPA_AES			= 0x29,
+	WPA_TKIP		= 0x49,
+	WPA_AES_TKIP		= 0x69,	/* Aes or Tkip */
+	WPA2_AES		= 0x31,
+	WPA2_TKIP		= 0x51,
+	WPA2_AES_TKIP		= 0x71,	/* Aes or Tkip */
 } SECURITY_T;
 
 typedef enum {
-	OPEN_SYSTEM     = 1,
-	SHARED_KEY      = 2,
-	ANY				= 3,
-	IEEE8021 = 5
+	OPEN_SYSTEM		= 1,
+	SHARED_KEY		= 2,
+	ANY			= 3,
+	IEEE8021		= 5
 } AUTHTYPE_T;
 
 typedef enum {
-	SITE_SURVEY_1CH    = 0,
-	SITE_SURVEY_ALL_CH = 1,
-	SITE_SURVEY_OFF    = 2
+	SITE_SURVEY_1CH		= 0,
+	SITE_SURVEY_ALL_CH	= 1,
+	SITE_SURVEY_OFF		= 2
 } SITE_SURVEY_T;
 
 typedef enum {
-	NORMAL_ACK = 0,
+	NORMAL_ACK		= 0,
 	NO_ACK,
 } ACK_POLICY_T;
 
 typedef enum {
-	DONT_RESET = 0,
-	DO_RESET   = 1,
-	NO_REQUEST = 2,
+	DONT_RESET		= 0,
+	DO_RESET		= 1,
+	NO_REQUEST		= 2,
 } RESET_REQ_T;
 
 typedef enum {
-	REKEY_DISABLE = 1,
+	REKEY_DISABLE		= 1,
 	REKEY_TIME_BASE,
 	REKEY_PKT_BASE,
 	REKEY_TIME_PKT_BASE
 } RSNA_REKEY_POLICY_T;
 
 typedef enum {
-	FILTER_NO       = 0x00,
-	FILTER_AP_ONLY  = 0x01,
-	FILTER_STA_ONLY = 0x02
+	FILTER_NO		= 0x00,
+	FILTER_AP_ONLY		= 0x01,
+	FILTER_STA_ONLY		= 0x02
 } SCAN_CLASS_FITLER_T;
 
 typedef enum {
-	PRI_HIGH_RSSI    = 0x00,
-	PRI_LOW_RSSI     = 0x04,
-	PRI_DETECT       = 0x08
+	PRI_HIGH_RSSI		= 0x00,
+	PRI_LOW_RSSI		= 0x04,
+	PRI_DETECT		= 0x08
 } SCAN_PRI_T;
 
 typedef enum {
-	CH_FILTER_OFF    = 0x00,
-	CH_FILTER_ON     = 0x10
+	CH_FILTER_OFF		= 0x00,
+	CH_FILTER_ON		= 0x10
 } CH_FILTER_T;
 
 typedef enum {
-	AUTO_PROT = 0,  /* Auto */
-	NO_PROT,                        /* Do not use any protection       */
-	ERP_PROT,                       /* Protect all ERP frame exchanges */
-	HT_PROT,                        /* Protect all HT frame exchanges  */
-	GF_PROT,                        /* Protect all GF frame exchanges  */
+	AUTO_PROT		= 0,	/* Auto */
+	NO_PROT,			/* Do not use any protection */
+	ERP_PROT,			/* Protect all ERP frame exchanges */
+	HT_PROT,			/* Protect all HT frame exchanges  */
+	GF_PROT,			/* Protect all GF frame exchanges  */
 } N_PROTECTION_MODE_T;
 
 typedef enum {
@@ -337,29 +337,29 @@ typedef enum {
 } G_PROTECTION_MODE_T;
 
 typedef enum {
-	HT_MIXED_MODE = 1,
+	HT_MIXED_MODE		= 1,
 	HT_ONLY_20MHZ_MODE,
 	HT_ONLY_20_40MHZ_MODE,
 } N_OPERATING_MODE_T;
 
 typedef enum {
-	NO_DETECT             = 0,
-	DETECT_ONLY           = 1,
-	DETECT_PROTECT        = 2,
-	DETECT_PROTECT_REPORT = 3,
+	NO_DETECT		= 0,
+	DETECT_ONLY		= 1,
+	DETECT_PROTECT		= 2,
+	DETECT_PROTECT_REPORT	= 3,
 } N_OBSS_DETECTION_T;
 
 typedef enum {
-	RTS_CTS_NONHT_PROT = 0,    /* RTS-CTS at non-HT rate */
-	FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
-	LSIG_TXOP_PROT,                    /* LSIG TXOP Protection */
-	FIRST_FRAME_MIXED_PROT,  /* First frame at Mixed format */
+	RTS_CTS_NONHT_PROT	= 0,	/* RTS-CTS at non-HT rate */
+	FIRST_FRAME_NONHT_PROT,		/* First frame at non-HT rate */
+	LSIG_TXOP_PROT,                 /* LSIG TXOP Protection */
+	FIRST_FRAME_MIXED_PROT,		/* First frame at Mixed format */
 } N_PROTECTION_TYPE_T;
 
 typedef enum {
-	STATIC_MODE   = 1,
-	DYNAMIC_MODE  = 2,
-	MIMO_MODE     = 3,              /* power save disable */
+	STATIC_MODE		= 1,
+	DYNAMIC_MODE		= 2,
+	MIMO_MODE		= 3,	/* power save disable */
 } N_SMPS_MODE_T;
 
 typedef enum {
@@ -372,21 +372,21 @@ typedef enum {
 } TX_ABORT_OPTION_T;
 
 typedef enum {
-	WID_CHAR     = 0,
-	WID_SHORT    = 1,
-	WID_INT      = 2,
-	WID_STR      = 3,
-	WID_BIN_DATA = 4,
-	WID_BIN   = 5,
-	WID_IP    = 6,
-	WID_ADR   = 7,
-	WID_UNDEF = 8,
-	WID_TYPE_FORCE_32BIT  = 0xFFFFFFFF
+	WID_CHAR		= 0,
+	WID_SHORT		= 1,
+	WID_INT			= 2,
+	WID_STR			= 3,
+	WID_BIN_DATA		= 4,
+	WID_BIN			= 5,
+	WID_IP			= 6,
+	WID_ADR			= 7,
+	WID_UNDEF		= 8,
+	WID_TYPE_FORCE_32BIT	= 0xFFFFFFFF
 
 } WID_TYPE_T, tenuWIDtype;
 
 typedef enum {
-	WID_NIL                            = 0xffff,
+	WID_NIL				= 0xffff,
 
 	/*
 	 *  BSS Type
@@ -395,7 +395,7 @@ typedef enum {
 	 *  Values to set :         0               1            2
 	 *  -----------------------------------------------------------
 	*/
-	WID_BSS_TYPE						= 0x0000,
+	WID_BSS_TYPE			= 0x0000,
 
 	/*
 	 *  Transmit Rate
@@ -404,7 +404,7 @@ typedef enum {
 	 *  Values to set :  1  2     5  11  6  9  12  18  24  36  48  54
 	 *  -----------------------------------------------------------
 	 */
-	WID_CURRENT_TX_RATE			= 0x0001,
+	WID_CURRENT_TX_RATE		= 0x0001,
 
 	/*
 	 *  Channel
@@ -413,7 +413,7 @@ typedef enum {
 	 *  Values to set    :  1  2  3  4  5  6  7  8   9   10  11  12  13  14
 	 *  -----------------------------------------------------------
 	 */
-	WID_CURRENT_CHANNEL			= 0x0002,
+	WID_CURRENT_CHANNEL		= 0x0002,
 
 	/*
 	 *  Preamble
@@ -422,7 +422,7 @@ typedef enum {
 	 *  Values to set :       0         1         2
 	 *  -----------------------------------------------------------
 	 */
-	WID_PREAMBLE						= 0x0003,
+	WID_PREAMBLE			= 0x0003,
 
 	/*
 	 *  11g operating mode (ignored if 11g not present)
@@ -431,7 +431,7 @@ typedef enum {
 	 *  Values to set :          1               2               3
 	 *  -----------------------------------------------------------
 	 */
-	WID_11G_OPERATING_MODE            = 0x0004,
+	WID_11G_OPERATING_MODE		= 0x0004,
 
 	/*
 	 *  Mac status (response only)
@@ -440,7 +440,7 @@ typedef enum {
 	 *  Values to get :          0               1
 	 *  -----------------------------------------------------------
 	 */
-	WID_STATUS						= 0x0005,
+	WID_STATUS			= 0x0005,
 
 	/*
 	 *  Scan type
@@ -449,7 +449,7 @@ typedef enum {
 	 *  Values to set :                  0                 1
 	 *  -----------------------------------------------------------
 	 */
-	WID_SCAN_TYPE                      = 0x0007,
+	WID_SCAN_TYPE			= 0x0007,
 
 	/*
 	 *  Key Id (WEP default key Id)
@@ -458,7 +458,7 @@ typedef enum {
 	 *  Values to set :	Same value. Default is 0
 	 *  -----------------------------------------------------------
 	 */
-	WID_KEY_ID                         = 0x0009,
+	WID_KEY_ID			= 0x0009,
 
 	/*
 	 *  QoS Enable
@@ -467,7 +467,7 @@ typedef enum {
 	 *  Values to set :   0             1
 	 *  -----------------------------------------------------------
 	 */
-	WID_QOS_ENABLE                     = 0x000A,
+	WID_QOS_ENABLE			= 0x000A,
 
 	/*
 	 *  Power Management
@@ -476,7 +476,7 @@ typedef enum {
 	 *  Values to set :   0              1               2
 	 *  -----------------------------------------------------------
 	 */
-	WID_POWER_MANAGEMENT               = 0x000B,
+	WID_POWER_MANAGEMENT		= 0x000B,
 
 	/*
 	 *  WEP/802 11I Configuration
@@ -488,7 +488,7 @@ typedef enum {
 	 *  Values (0x)   :      69                             71
 	 *  -----------------------------------------------------------
 	 */
-	WID_11I_MODE                       = 0x000C,
+	WID_11I_MODE			= 0x000C,
 
 	/*
 	 *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
@@ -497,7 +497,7 @@ typedef enum {
 	 *  Values (0x)   :    01             02         03     |      BIT2
 	 *  -----------------------------------------------------------
 	 */
-	WID_AUTH_TYPE                      = 0x000D,
+	WID_AUTH_TYPE			= 0x000D,
 
 	/*
 	 *  Site Survey Type
@@ -508,7 +508,7 @@ typedef enum {
 	 *  Disable Site Survey :  2
 	 *  -----------------------------------------------------------
 	 */
-	WID_SITE_SURVEY                    = 0x000E,
+	WID_SITE_SURVEY			= 0x000E,
 
 	/*
 	 *  Listen Interval
@@ -517,7 +517,7 @@ typedef enum {
 	 *  Values to set :   Same value. Default is 3
 	 *  -----------------------------------------------------------
 	 */
-	WID_LISTEN_INTERVAL                = 0x000F,
+	WID_LISTEN_INTERVAL		= 0x000F,
 
 	/*
 	 *  DTIM Period
@@ -526,7 +526,7 @@ typedef enum {
 	 *  Values to set :   Same value. Default is 3
 	 *  -----------------------------------------------------------
 	 */
-	WID_DTIM_PERIOD                    = 0x0010,
+	WID_DTIM_PERIOD			= 0x0010,
 
 	/*
 	 *  ACK Policy
@@ -535,7 +535,7 @@ typedef enum {
 	 *  Values to set :       0                   1
 	 *  -----------------------------------------------------------
 	 */
-	WID_ACK_POLICY                     = 0x0011,
+	WID_ACK_POLICY			= 0x0011,
 
 	/*
 	 *  Reset MAC (Set only)
@@ -544,7 +544,7 @@ typedef enum {
 	 *  Values to set :       0                   1              2
 	 *  -----------------------------------------------------------
 	 */
-	WID_RESET                          = 0x0012,
+	WID_RESET			= 0x0012,
 
 	/*
 	 *  Broadcast SSID Option: Setting this will adhere to "" SSID element
@@ -553,7 +553,7 @@ typedef enum {
 	 *  Values to set :   1                  0
 	 *  -----------------------------------------------------------
 	 */
-	WID_BCAST_SSID                     = 0x0015,
+	WID_BCAST_SSID			= 0x0015,
 
 	/*
 	 *  Disconnect (Station)
@@ -562,7 +562,7 @@ typedef enum {
 	 *  Values to set :   Association ID
 	 *  -----------------------------------------------------------
 	 */
-	WID_DISCONNECT                     = 0x0016,
+	WID_DISCONNECT			= 0x0016,
 
 	/*
 	 *  11a Tx Power Level
@@ -571,7 +571,7 @@ typedef enum {
 	 *  Values : Any value between 0 and 63 (inclusive; Default is 48)
 	 *  -----------------------------------------------------------
 	 */
-	WID_TX_POWER_LEVEL_11A             = 0x0018,
+	WID_TX_POWER_LEVEL_11A		= 0x0018,
 
 	/*
 	 *  Group Key Update Policy Selection
@@ -580,7 +580,7 @@ typedef enum {
 	 *  Values to set :   1            2          3               4
 	 *  -----------------------------------------------------------
 	 */
-	WID_REKEY_POLICY                   = 0x0019,
+	WID_REKEY_POLICY		= 0x0019,
 
 	/*
 	 *  Allow Short Slot
@@ -590,9 +590,9 @@ typedef enum {
 	 *  Values to set :    0         1
 	 *  -----------------------------------------------------------
 	 */
-	WID_SHORT_SLOT_ALLOWED             = 0x001A,
+	WID_SHORT_SLOT_ALLOWED		= 0x001A,
 
-	WID_PHY_ACTIVE_REG                 = 0x001B,
+	WID_PHY_ACTIVE_REG		= 0x001B,
 
 	/*
 	 *  11b Tx Power Level
@@ -601,7 +601,7 @@ typedef enum {
 	 *  Values to set : Any value between 0 and 63 (inclusive; Default 48)
 	 *  -----------------------------------------------------------
 	 */
-	WID_TX_POWER_LEVEL_11B             = 0x001D,
+	WID_TX_POWER_LEVEL_11B		= 0x001D,
 
 	/*
 	 *  Scan Request
@@ -610,7 +610,7 @@ typedef enum {
 	 *  Values to set : 0
 	 *  -----------------------------------------------------------
 	 */
-	WID_START_SCAN_REQ                 = 0x001E,
+	WID_START_SCAN_REQ		= 0x001E,
 
 	/*
 	 *  Rssi (get only)
@@ -619,7 +619,7 @@ typedef enum {
 	 *  Values to get : Rssi value
 	 *  -----------------------------------------------------------
 	 */
-	WID_RSSI                           = 0x001F,
+	WID_RSSI			= 0x001F,
 
 	/*
 	 *  Join Request
@@ -628,9 +628,9 @@ typedef enum {
 	 *  Values to set : index of scan result
 	 *  -----------------------------------------------------------
 	 */
-	WID_JOIN_REQ                       = 0x0020,
+	WID_JOIN_REQ			= 0x0020,
 
-	WID_LINKSPEED			  = 0x0026,
+	WID_LINKSPEED			= 0x0026,
 
 	/*
 	 *  Enable User Control of TX Power
@@ -639,9 +639,9 @@ typedef enum {
 	 *  Values to set :    0                       1
 	 *  -----------------------------------------------------------
 	 */
-	WID_USER_CONTROL_ON_TX_POWER       = 0x0027,
+	WID_USER_CONTROL_ON_TX_POWER	= 0x0027,
 
-	WID_MEMORY_ACCESS_8BIT             = 0x0029,
+	WID_MEMORY_ACCESS_8BIT		= 0x0029,
 
 	/*
 	 *  Enable Auto RX Sensitivity feature
@@ -650,7 +650,7 @@ typedef enum {
 	 *  Values to set :    0                       1
 	 *  -----------------------------------------------------------
 	 */
-	WID_AUTO_RX_SENSITIVITY            = 0x0032,
+	WID_AUTO_RX_SENSITIVITY		= 0x0032,
 
 	/*
 	 *  Receive Buffer Based Ack
@@ -659,7 +659,7 @@ typedef enum {
 	 *  Values to set :    0                       1
 	 *  -----------------------------------------------------------
 	 */
-	WID_DATAFLOW_CONTROL               = 0x0033,
+	WID_DATAFLOW_CONTROL		= 0x0033,
 
 	/*
 	 *  Scan Filter
@@ -672,7 +672,7 @@ typedef enum {
 	 *  Values to set :                 0                  0x10
 	 *  -----------------------------------------------------------
 	 */
-	WID_SCAN_FILTER                    = 0x0036,
+	WID_SCAN_FILTER			= 0x0036,
 
 	/*
 	 *  Link Loss Threshold (measure in the beacon period)
@@ -681,13 +681,13 @@ typedef enum {
 	 *  Values to set : Same value. Default is 10
 	 *  -----------------------------------------------------------
 	 */
-	WID_LINK_LOSS_THRESHOLD            = 0x0037,
+	WID_LINK_LOSS_THRESHOLD		= 0x0037,
 
 	/*BugID_4978*/
-	WID_ABORT_RUNNING_SCAN = 0x003E,
+	WID_ABORT_RUNNING_SCAN		= 0x003E,
 
 	/* NMAC Character WID list */
-	WID_WPS_START                      = 0x0043,
+	WID_WPS_START			= 0x0043,
 
 	/*
 	 *  Protection mode for MAC
@@ -696,7 +696,7 @@ typedef enum {
 	 *  Values to set :  0     1              2      3     4
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_PROT_MECH                  = 0x0080,
+	WID_11N_PROT_MECH		= 0x0080,
 
 	/*
 	 *  ERP Protection type for MAC
@@ -705,7 +705,7 @@ typedef enum {
 	 *  Values to set :  0          1
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_ERP_PROT_TYPE              = 0x0081,
+	WID_11N_ERP_PROT_TYPE		= 0x0081,
 
 	/*
 	 *  HT Option Enable
@@ -714,7 +714,7 @@ typedef enum {
 	 *  Values to set :   1                  0
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_ENABLE                     = 0x0082,
+	WID_11N_ENABLE			= 0x0082,
 
 	/*
 	 *  11n Operating mode (Note that 11g operating mode will also be
@@ -724,7 +724,7 @@ typedef enum {
 	 *  Values to set :     1         2               3
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_OPERATING_MODE             = 0x0083,
+	WID_11N_OPERATING_MODE		= 0x0083,
 
 	/*
 	 *  11n OBSS non-HT STA Detection flag
@@ -739,7 +739,7 @@ typedef enum {
 	 *  Values to set :  3
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_OBSS_NONHT_DETECTION       = 0x0084,
+	WID_11N_OBSS_NONHT_DETECTION	= 0x0084,
 
 	/*
 	 *  11n HT Protection Type
@@ -750,7 +750,7 @@ typedef enum {
 	 *  Values to set :  2         3
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_HT_PROT_TYPE               = 0x0085,
+	WID_11N_HT_PROT_TYPE		= 0x0085,
 
 	/*
 	 *  11n RIFS Protection Enable Flag
@@ -759,7 +759,7 @@ typedef enum {
 	 *  Values to set :  0          1
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_RIFS_PROT_ENABLE           = 0x0086,
+	WID_11N_RIFS_PROT_ENABLE	= 0x0086,
 
 	/*
 	 *  SMPS Mode
@@ -768,7 +768,7 @@ typedef enum {
 	 *  Values to set :  1        2         3
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_SMPS_MODE                  = 0x0087,
+	WID_11N_SMPS_MODE		= 0x0087,
 
 	/*
 	 *  Current transmit MCS
@@ -777,9 +777,9 @@ typedef enum {
 	 *  Values to set :  0 to 7
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_CURRENT_TX_MCS             = 0x0088,
+	WID_11N_CURRENT_TX_MCS		= 0x0088,
 
-	WID_11N_PRINT_STATS                = 0x0089,
+	WID_11N_PRINT_STATS		= 0x0089,
 
 	/*
 	 *  11n Short GI Enable Flag
@@ -788,7 +788,7 @@ typedef enum {
 	 *  Values to set :  0          1
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_SHORT_GI_ENABLE            = 0x008D,
+	WID_11N_SHORT_GI_ENABLE		= 0x008D,
 
 	/*
 	 *  11n RIFS Enable Flag
@@ -797,7 +797,7 @@ typedef enum {
 	 *  Values to set :  0          1
 	 *  -----------------------------------------------------------
 	 */
-	WID_RIFS_MODE                      = 0x0094,
+	WID_RIFS_MODE			= 0x0094,
 
 	/*
 	 *  TX Abort Feature
@@ -810,15 +810,15 @@ typedef enum {
 	 *  Values to set :             4                      5
 	 *  -----------------------------------------------------------
 	 */
-	WID_TX_ABORT_CONFIG                = 0x00A1,
+	WID_TX_ABORT_CONFIG		= 0x00A1,
 
-	WID_REG_TSSI_11B_VALUE             = 0x00A6,
-	WID_REG_TSSI_11G_VALUE             = 0x00A7,
-	WID_REG_TSSI_11N_VALUE             = 0x00A8,
-	WID_TX_CALIBRATION                 = 0x00A9,
-	WID_DSCR_TSSI_11B_VALUE            = 0x00AA,
-	WID_DSCR_TSSI_11G_VALUE            = 0x00AB,
-	WID_DSCR_TSSI_11N_VALUE            = 0x00AC,
+	WID_REG_TSSI_11B_VALUE		= 0x00A6,
+	WID_REG_TSSI_11G_VALUE		= 0x00A7,
+	WID_REG_TSSI_11N_VALUE		= 0x00A8,
+	WID_TX_CALIBRATION		= 0x00A9,
+	WID_DSCR_TSSI_11B_VALUE		= 0x00AA,
+	WID_DSCR_TSSI_11G_VALUE		= 0x00AB,
+	WID_DSCR_TSSI_11N_VALUE		= 0x00AC,
 
 	/*
 	 *  Immediate Block-Ack Support
@@ -827,7 +827,7 @@ typedef enum {
 	 *  Values to set :    0                       1
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_IMMEDIATE_BA_ENABLED       = 0x00AF,
+	WID_11N_IMMEDIATE_BA_ENABLED	= 0x00AF,
 
 	/*
 	 *  TXOP Disable Flag
@@ -836,19 +836,19 @@ typedef enum {
 	 *  Values to set :    1                        0
 	 *  -----------------------------------------------------------
 	 */
-	WID_11N_TXOP_PROT_DISABLE          = 0x00B0,
+	WID_11N_TXOP_PROT_DISABLE	= 0x00B0,
 
-	WID_TX_POWER_LEVEL_11N             = 0x00B1,
+	WID_TX_POWER_LEVEL_11N		= 0x00B1,
 
 	/* Custom Character WID list */
-	WID_PC_TEST_MODE          = 0x00C8,
+	WID_PC_TEST_MODE		= 0x00C8,
 	/*bug3819: */
 	/* SCAN Complete notification WID*/
 	WID_SCAN_COMPLETE		= 0x00C9,
 
-	WID_DEL_BEACON					= 0x00CA,
+	WID_DEL_BEACON			= 0x00CA,
 
-	WID_LOGTerminal_Switch					= 0x00CD,
+	WID_LOGTerminal_Switch		= 0x00CD,
 	/*  EMAC Short WID list */
 	/*  RTS Threshold */
 	/*
@@ -857,7 +857,7 @@ typedef enum {
 	 *  Values to set :   Same value. Default is 2347
 	 *  -----------------------------------------------------------
 	 */
-	WID_RTS_THRESHOLD                  = 0x1000,
+	WID_RTS_THRESHOLD		 = 0x1000,
 
 	/*
 	 *  Fragmentation Threshold
@@ -866,145 +866,145 @@ typedef enum {
 	 *  Values to set :   Same value. Default is 2346
 	 *  -----------------------------------------------------------
 	 */
-	WID_FRAG_THRESHOLD                 = 0x1001,
+	WID_FRAG_THRESHOLD		= 0x1001,
 
-	WID_SHORT_RETRY_LIMIT              = 0x1002,
-	WID_LONG_RETRY_LIMIT               = 0x1003,
-	WID_BEACON_INTERVAL                = 0x1006,
-	WID_MEMORY_ACCESS_16BIT            = 0x1008,
-	WID_RX_SENSE                       = 0x100B,
-	WID_ACTIVE_SCAN_TIME               = 0x100C,
-	WID_PASSIVE_SCAN_TIME              = 0x100D,
+	WID_SHORT_RETRY_LIMIT		= 0x1002,
+	WID_LONG_RETRY_LIMIT		= 0x1003,
+	WID_BEACON_INTERVAL		= 0x1006,
+	WID_MEMORY_ACCESS_16BIT		= 0x1008,
+	WID_RX_SENSE			= 0x100B,
+	WID_ACTIVE_SCAN_TIME		= 0x100C,
+	WID_PASSIVE_SCAN_TIME		= 0x100D,
 
-	WID_SITE_SURVEY_SCAN_TIME          = 0x100E,
-	WID_JOIN_START_TIMEOUT             = 0x100F,
-	WID_AUTH_TIMEOUT                   = 0x1010,
-	WID_ASOC_TIMEOUT                   = 0x1011,
-	WID_11I_PROTOCOL_TIMEOUT           = 0x1012,
-	WID_EAPOL_RESPONSE_TIMEOUT         = 0x1013,
+	WID_SITE_SURVEY_SCAN_TIME	= 0x100E,
+	WID_JOIN_START_TIMEOUT		= 0x100F,
+	WID_AUTH_TIMEOUT		= 0x1010,
+	WID_ASOC_TIMEOUT		= 0x1011,
+	WID_11I_PROTOCOL_TIMEOUT	= 0x1012,
+	WID_EAPOL_RESPONSE_TIMEOUT	= 0x1013,
 
 	/* NMAC Short WID list */
-	WID_11N_SIG_QUAL_VAL               = 0x1085,
-	WID_CCA_THRESHOLD                  = 0x1087,
+	WID_11N_SIG_QUAL_VAL		= 0x1085,
+	WID_CCA_THRESHOLD		= 0x1087,
 
 	/* Custom Short WID list */
 
 	/* EMAC Integer WID list */
-	WID_FAILED_COUNT                   = 0x2000,
-	WID_RETRY_COUNT                    = 0x2001,
-	WID_MULTIPLE_RETRY_COUNT           = 0x2002,
-	WID_FRAME_DUPLICATE_COUNT          = 0x2003,
-	WID_ACK_FAILURE_COUNT              = 0x2004,
-	WID_RECEIVED_FRAGMENT_COUNT        = 0x2005,
-	WID_MCAST_RECEIVED_FRAME_COUNT     = 0x2006,
-	WID_FCS_ERROR_COUNT                = 0x2007,
-	WID_SUCCESS_FRAME_COUNT            = 0x2008,
-	WID_HUT_TX_COUNT                   = 0x200A,
-	WID_TX_FRAGMENT_COUNT              = 0x200B,
-	WID_TX_MULTICAST_FRAME_COUNT       = 0x200C,
-	WID_RTS_SUCCESS_COUNT              = 0x200D,
-	WID_RTS_FAILURE_COUNT              = 0x200E,
-	WID_WEP_UNDECRYPTABLE_COUNT        = 0x200F,
-	WID_REKEY_PERIOD                   = 0x2010,
-	WID_REKEY_PACKET_COUNT             = 0x2011,
-	WID_1X_SERV_ADDR                   = 0x2012,
-	WID_STACK_IP_ADDR                  = 0x2013,
-	WID_STACK_NETMASK_ADDR             = 0x2014,
-	WID_HW_RX_COUNT                    = 0x2015,
-	WID_MEMORY_ADDRESS                 = 0x201E,
-	WID_MEMORY_ACCESS_32BIT            = 0x201F,
-	WID_RF_REG_VAL                     = 0x2021,
+	WID_FAILED_COUNT		= 0x2000,
+	WID_RETRY_COUNT			= 0x2001,
+	WID_MULTIPLE_RETRY_COUNT	= 0x2002,
+	WID_FRAME_DUPLICATE_COUNT	= 0x2003,
+	WID_ACK_FAILURE_COUNT		= 0x2004,
+	WID_RECEIVED_FRAGMENT_COUNT	= 0x2005,
+	WID_MCAST_RECEIVED_FRAME_COUNT	= 0x2006,
+	WID_FCS_ERROR_COUNT		= 0x2007,
+	WID_SUCCESS_FRAME_COUNT		= 0x2008,
+	WID_HUT_TX_COUNT		= 0x200A,
+	WID_TX_FRAGMENT_COUNT		= 0x200B,
+	WID_TX_MULTICAST_FRAME_COUNT	= 0x200C,
+	WID_RTS_SUCCESS_COUNT		= 0x200D,
+	WID_RTS_FAILURE_COUNT		= 0x200E,
+	WID_WEP_UNDECRYPTABLE_COUNT	= 0x200F,
+	WID_REKEY_PERIOD		= 0x2010,
+	WID_REKEY_PACKET_COUNT		= 0x2011,
+	WID_1X_SERV_ADDR		= 0x2012,
+	WID_STACK_IP_ADDR		= 0x2013,
+	WID_STACK_NETMASK_ADDR		= 0x2014,
+	WID_HW_RX_COUNT			= 0x2015,
+	WID_MEMORY_ADDRESS		= 0x201E,
+	WID_MEMORY_ACCESS_32BIT		= 0x201F,
+	WID_RF_REG_VAL			= 0x2021,
 
 	/* NMAC Integer WID list */
-	WID_11N_PHY_ACTIVE_REG_VAL         = 0x2080,
+	WID_11N_PHY_ACTIVE_REG_VAL	= 0x2080,
 
 	/* Custom Integer WID list */
-	WID_GET_INACTIVE_TIME     = 0x2084,
-	WID_SET_DRV_HANDLER =		 0X2085,
-	WID_SET_OPERATION_MODE =	 0X2086,
+	WID_GET_INACTIVE_TIME		= 0x2084,
+	WID_SET_DRV_HANDLER		= 0X2085,
+	WID_SET_OPERATION_MODE		= 0X2086,
 	/* EMAC String WID list */
-	WID_SSID                           = 0x3000,
-	WID_FIRMWARE_VERSION               = 0x3001,
-	WID_OPERATIONAL_RATE_SET           = 0x3002,
-	WID_BSSID                          = 0x3003,
-	WID_WEP_KEY_VALUE                  = 0x3004,
-	WID_11I_PSK                        = 0x3008,
-	WID_11E_P_ACTION_REQ               = 0x3009,
-	WID_1X_KEY                         = 0x300A,
-	WID_HARDWARE_VERSION               = 0x300B,
-	WID_MAC_ADDR                       = 0x300C,
-	WID_HUT_DEST_ADDR                  = 0x300D,
-	WID_PHY_VERSION                    = 0x300F,
-	WID_SUPP_USERNAME                  = 0x3010,
-	WID_SUPP_PASSWORD                  = 0x3011,
-	WID_SITE_SURVEY_RESULTS            = 0x3012,
-	WID_RX_POWER_LEVEL                 = 0x3013,
-	WID_DEL_ALL_RX_BA				= 0x3014,
-	WID_SET_STA_MAC_INACTIVE_TIME   = 0x3017,
-	WID_ADD_WEP_KEY                    = 0x3019,
-	WID_REMOVE_WEP_KEY                 = 0x301A,
-	WID_ADD_PTK                        = 0x301B,
-	WID_ADD_RX_GTK                     = 0x301C,
-	WID_ADD_TX_GTK                     = 0x301D,
-	WID_REMOVE_KEY                     = 0x301E,
-	WID_ASSOC_REQ_INFO                 = 0x301F,
-	WID_ASSOC_RES_INFO                 = 0x3020,
-	WID_MANUFACTURER                   = 0x3026, /*Added for CAPI tool */
-	WID_MODEL_NAME                       = 0x3027, /*Added for CAPI tool */
-	WID_MODEL_NUM                      = 0x3028, /*Added for CAPI tool */
-	WID_DEVICE_NAME                      = 0x3029, /*Added for CAPI tool */
+	WID_SSID			= 0x3000,
+	WID_FIRMWARE_VERSION		= 0x3001,
+	WID_OPERATIONAL_RATE_SET	= 0x3002,
+	WID_BSSID			= 0x3003,
+	WID_WEP_KEY_VALUE		= 0x3004,
+	WID_11I_PSK			= 0x3008,
+	WID_11E_P_ACTION_REQ		= 0x3009,
+	WID_1X_KEY			= 0x300A,
+	WID_HARDWARE_VERSION		= 0x300B,
+	WID_MAC_ADDR			= 0x300C,
+	WID_HUT_DEST_ADDR		= 0x300D,
+	WID_PHY_VERSION			= 0x300F,
+	WID_SUPP_USERNAME		= 0x3010,
+	WID_SUPP_PASSWORD		= 0x3011,
+	WID_SITE_SURVEY_RESULTS		= 0x3012,
+	WID_RX_POWER_LEVEL		= 0x3013,
+	WID_DEL_ALL_RX_BA		= 0x3014,
+	WID_SET_STA_MAC_INACTIVE_TIME	= 0x3017,
+	WID_ADD_WEP_KEY			= 0x3019,
+	WID_REMOVE_WEP_KEY		= 0x301A,
+	WID_ADD_PTK			= 0x301B,
+	WID_ADD_RX_GTK			= 0x301C,
+	WID_ADD_TX_GTK			= 0x301D,
+	WID_REMOVE_KEY			= 0x301E,
+	WID_ASSOC_REQ_INFO		= 0x301F,
+	WID_ASSOC_RES_INFO		= 0x3020,
+	WID_MANUFACTURER		= 0x3026, /*Added for CAPI tool */
+	WID_MODEL_NAME			= 0x3027, /*Added for CAPI tool */
+	WID_MODEL_NUM			= 0x3028, /*Added for CAPI tool */
+	WID_DEVICE_NAME			= 0x3029, /*Added for CAPI tool */
 
 	/* NMAC String WID list */
-	WID_11N_P_ACTION_REQ               = 0x3080,
-	WID_HUT_TEST_ID                    = 0x3081,
-	WID_PMKID_INFO                     = 0x3082,
-	WID_FIRMWARE_INFO                  = 0x3083,
-	WID_REGISTER_FRAME                = 0x3084,
-	WID_DEL_ALL_STA          = 0x3085,
-	WID_REMAIN_ON_CHAN  = 0x3996,
+	WID_11N_P_ACTION_REQ		= 0x3080,
+	WID_HUT_TEST_ID			= 0x3081,
+	WID_PMKID_INFO			= 0x3082,
+	WID_FIRMWARE_INFO		= 0x3083,
+	WID_REGISTER_FRAME		= 0x3084,
+	WID_DEL_ALL_STA			= 0x3085,
+	WID_REMAIN_ON_CHAN		= 0x3996,
 	/*BugID_4156*/
-	WID_SSID_PROBE_REQ = 0x3997,
+	WID_SSID_PROBE_REQ		= 0x3997,
 	/*
 	 * BugID_4124 WID to trigger modified Join Request using
 	 * SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)
 	 */
-	WID_JOIN_REQ_EXTENDED		 = 0x3998,
+	WID_JOIN_REQ_EXTENDED		= 0x3998,
 
 	/* BugID 4951: WID toset IP address in firmware */
-	WID_IP_ADDRESS					= 0x3999,
+	WID_IP_ADDRESS			= 0x3999,
 
 	/* Custom String WID list */
 
 	/* EMAC Binary WID list */
-	WID_UAPSD_CONFIG                   = 0x4001,
-	WID_UAPSD_STATUS                   = 0x4002,
-	WID_WMM_AP_AC_PARAMS               = 0x4003,
-	WID_WMM_STA_AC_PARAMS              = 0x4004,
-	WID_NETWORK_INFO                   = 0x4005,
-	WID_STA_JOIN_INFO                  = 0x4006,
-	WID_CONNECTED_STA_LIST             = 0x4007,
+	WID_UAPSD_CONFIG		= 0x4001,
+	WID_UAPSD_STATUS		= 0x4002,
+	WID_WMM_AP_AC_PARAMS		= 0x4003,
+	WID_WMM_STA_AC_PARAMS		= 0x4004,
+	WID_NETWORK_INFO		= 0x4005,
+	WID_STA_JOIN_INFO		= 0x4006,
+	WID_CONNECTED_STA_LIST		= 0x4007,
 
 	/* NMAC Binary WID list */
-	WID_11N_AUTORATE_TABLE             = 0x4080,
+	WID_11N_AUTORATE_TABLE		= 0x4080,
 
 	/*Added here by Amr - BugID 4134*/
-	WID_SCAN_CHANNEL_LIST                      = 0x4084,
+	WID_SCAN_CHANNEL_LIST		= 0x4084,
 
 	/*BugID_3746 WID to add IE to be added in next probe request*/
-	WID_INFO_ELEMENT_PROBE	 = 0x4085,
+	WID_INFO_ELEMENT_PROBE		= 0x4085,
 	/*BugID_3746 WID to add IE to be added in next associate request*/
-	WID_INFO_ELEMENT_ASSOCIATE	 = 0x4086,
-	WID_ADD_STA					 = 0X4087,
-	WID_REMOVE_STA				 = 0X4088,
-	WID_EDIT_STA					 = 0X4089,
-	WID_ADD_BEACON				= 0x408a,
+	WID_INFO_ELEMENT_ASSOCIATE	= 0x4086,
+	WID_ADD_STA			= 0X4087,
+	WID_REMOVE_STA			= 0X4088,
+	WID_EDIT_STA			= 0X4089,
+	WID_ADD_BEACON			= 0x408a,
 
 	/* BugID 5108 */
 	WID_SETUP_MULTICAST_FILTER	= 0x408b,
 
 	/* Miscellaneous WIDs */
-	WID_ALL                            = 0x7FFE,
-	WID_MAX                            = 0xFFFF
+	WID_ALL				= 0x7FFE,
+	WID_MAX				= 0xFFFF
 } WID_T;
 
 int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup);
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2015-09-21  1:52 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-17 10:02 [PATCH v2 0/4] v2 of the series including the null check routin Tony Cho
2015-09-17 10:02 ` [PATCH v2 1/4] staging: wilc1000: fix null check routine Tony Cho
2015-09-19  2:50   ` Greg KH
2015-09-21  1:52     ` Tony Cho
2015-09-17 10:02 ` [PATCH v2 2/4] staging: wilc1000: remove warnings on the multiple blank lines uses Tony Cho
2015-09-19  2:52   ` Greg KH
2015-09-17 10:02 ` [PATCH v2 3/4] staging: wilc1000: remove warnings line over 80 characters Tony Cho
2015-09-17 10:02 ` [PATCH v2 4/4] staging: wilc1000: wilc_wlan_if.h align defines Tony Cho

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).