From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail2.candelatech.com ([208.74.158.173]:55352 "EHLO mail2.candelatech.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751912AbdFJQD4 (ORCPT ); Sat, 10 Jun 2017 12:03:56 -0400 Message-ID: <593C17DA.7080603@candelatech.com> (sfid-20170610_180359_766892_A0107F6C) Date: Sat, 10 Jun 2017 09:01:30 -0700 From: Ben Greear MIME-Version: 1.0 To: fengbin CC: Janusz Dziedzic , Johannes Berg , Denis Kenzior , "linux-wireless@vger.kernel.org" , "hostap@lists.infradead.org" Subject: Re: Question on setting key right after the EAPOL 4/4 is sent. References: <4982156c-5325-8021-dcd3-f13e02c63c72@candelatech.com> <11de85e9-6028-e2f8-376b-3188ff1b95a5@gmail.com> <2cfd1160-f9b4-5f04-e20f-8d7f9be54f95@candelatech.com> <1496993334.2424.1.camel@sipsolutions.net> <1497038480.12088.6.camel@sipsolutions.net> In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 06/09/2017 04:51 PM, fengbin wrote: > seems your firmware doesn't support HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT? > Otherwise , it should work perfectly because Key messages are marked as no hw encryption. Well, it could be my bug.....but unless you have access to ath10k firmware, then I can't explain further what is the particular issue. If you do have access, then I can give you some hints to follow the code path in question. Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com