From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-fx0-f216.google.com ([209.85.220.216]:49331 "EHLO mail-fx0-f216.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752697AbZFKOjF convert rfc822-to-8bit (ORCPT ); Thu, 11 Jun 2009 10:39:05 -0400 Received: by fxm12 with SMTP id 12so14408fxm.37 for ; Thu, 11 Jun 2009 07:39:06 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: <1244685780-28930-1-git-send-email-me@bobcopeland.com> References: <1244685780-28930-1-git-send-email-me@bobcopeland.com> From: =?ISO-8859-1?Q?G=E1bor_Stefanik?= Date: Thu, 11 Jun 2009 16:38:46 +0200 Message-ID: <69e28c910906110738r54f8cecdv3c5f8dcd58b8b6c8@mail.gmail.com> Subject: Re: [PATCH/RFC 0/7] wl12xx SDIO interface To: Bob Copeland Cc: linux-wireless@vger.kernel.org, pierre@ossman.eu, kalle.valo@iki.fi, san@google.com Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: On Thu, Jun 11, 2009 at 4:02 AM, Bob Copeland wrote: > Here's v2 of the SDIO interface for wl12xx, still with a FIXME or two. > > For my part, this is mainly a port of the Google/TI Android SDIO > interface logic to the existing SPI driver.  I have confirmed that > the driver associates and sends some traffic. > > Pierre, hoping to get your perspective on the SDIO bits in patch 7, > since I very likely don't know what I'm doing :)  Especially regarding > the platform code setup, in which the correct GPIOs have to be written > to turn on the device before probe will work.  For the SPI interface, > we use spi_register_board_info() for a similar purpose, but I'm not > sure if there is a standard way to do that for SDIO.  This copies > Google's platform driver for now. > > Conversion to readl/writel etc where appropriate is TODO. > > Bob Copeland (7): >  wl12xx: separate bus i/o code into io.c >  wl12xx: use wiphy_dev instead of wl->spi->dev >  wl12xx: introduce wl12xx_if_operations struct >  wl12xx: make wl12xx_set_partition bus agnostic >  wl12xx: move module probe methods into spi.c >  wl12xx: split spi interface into separate module >  wl12xx: add sdio support > >  drivers/net/wireless/wl12xx/Kconfig  |   24 +++- >  drivers/net/wireless/wl12xx/Makefile |   10 +- >  drivers/net/wireless/wl12xx/acx.c    |    3 +- >  drivers/net/wireless/wl12xx/boot.c   |    3 +- >  drivers/net/wireless/wl12xx/cmd.c    |   15 +- >  drivers/net/wireless/wl12xx/event.c  |    6 +- >  drivers/net/wireless/wl12xx/io.c     |  181 +++++++++++++++++++++ >  drivers/net/wireless/wl12xx/io.h     |   62 +++++++ >  drivers/net/wireless/wl12xx/main.c   |  152 ++++-------------- >  drivers/net/wireless/wl12xx/ps.c     |    3 +- >  drivers/net/wireless/wl12xx/rx.c     |   10 +- >  drivers/net/wireless/wl12xx/sdio.c   |  250 +++++++++++++++++++++++++++++ >  drivers/net/wireless/wl12xx/spi.c    |  289 ++++++++++++++------------------- >  drivers/net/wireless/wl12xx/spi.h    |   40 ----- >  drivers/net/wireless/wl12xx/tx.c     |   64 ++++---- >  drivers/net/wireless/wl12xx/wl1251.c |    9 +- >  drivers/net/wireless/wl12xx/wl12xx.h |   14 ++- >  17 files changed, 752 insertions(+), 383 deletions(-) >  create mode 100644 drivers/net/wireless/wl12xx/io.c >  create mode 100644 drivers/net/wireless/wl12xx/io.h >  create mode 100644 drivers/net/wireless/wl12xx/sdio.c Can we expect vlynq any time soon? -- Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)