Re: ath11k and vfio-pci support

[James Prestwood <prestwoj@gmail.com>]

Hi Kalle,

On 1/17/24 5:43 AM, Kalle Valo wrote:
> James Prestwood <prestwoj@gmail.com> writes:
>
>>>> I don't see anything in the dmesg logs, or in lspci etc.
>>>>
>>> fee00578 is the physical MSI vector so I got it using lspci in host, see
>>> ...
>>>          Capabilities: [50] MSI: Enable+ Count=1/32 Maskable+ 64bit-
>>>                  Address: fee00578  Data: 0000
>>>                  Masking: fffffffe  Pending: 00000000
>>> ...
>> Mine looks like this:
>>
>> ...
>>
>>      Capabilities: [50] MSI: Enable- Count=1/32 Maskable+ 64bit-
>>          Address: 00000000  Data: 0000
>>          Masking: 00000000  Pending: 00000000
> And that lspci output is from the host (not the guest)?

Yes, that is on the host. On the guest I have:

Capabilities: [50] MSI: Enable+ Count=1/32 Maskable+ 64bit-
         Address: fee01004  Data: 0028
         Masking: fffffffe  Pending: 00000000

And I just tried those values, i.e:

-       ath11k_dbg(ab, ATH11K_DBG_PCI, "msi base data is %d\n", 
ab->pci.msi.ep_base_data);
+        ab->pci.msi.addr_hi = 0;
+        ab->pci.msi.addr_lo = 0xfee01004;
+        ath11k_dbg(ab, ATH11K_DBG_PCI, "msi addr hi 0x%x lo 0x%x base 
data is %d\n",
+                   ab->pci.msi.addr_hi,
+                   ab->pci.msi.addr_lo,
+                   ab->pci.msi.ep_base_data);

Though wasn't sure for "Data"/ep_base_data since the kernel uses a u32 
but lspci appears to show a 16 bit value. I tried:

+       ab_pci->ab->pci.msi.ep_base_data = 0;
+       ab_pci->ab->pci.msi.ep_base_data = 0x0028;
+       ab_pci->ab->pci.msi.ep_base_data = 0x0028000;

(maybe thats entirely the wrong change)

>