Linux wireless drivers development
 help / color / mirror / Atom feed
From: Ping-Ke Shih <pkshih@realtek.com>
To: Rik van Westendorp <rik@ellarik.com>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: RE: Bug report: Realtek RTL8851BE Wi-Fi does not recover from suspend
Date: Sun, 22 Nov 2026 01:37:30 +0000	[thread overview]
Message-ID: <7c49b984f5e24dcbadb391e0acdcda4a@realtek.com> (raw)
In-Reply-To: <1dc9a6271147c88c7179d55b469372bdb5c8fdbf.camel@ellarik.com>

Rik van Westendorp <rik@ellarik.com> wrote:
> Symptoms and dmesg evidence
> 
> Immediately after resume, the kernel logs (dmesg) show the driver
> failing to reinitialize the chip:
> 
> rtw89_8851be 0000:01:00.0: failed to write DBI register, addr=0xB48
> rtw89_8851be 0000:01:00.0: failed to write DBI register, addr=0xB48
> rtw89_8851be 0000:01:00.0: failed to read PCI cap, ret=134
> rtw89_8851be 0000:01:00.0: loaded firmware rtw89/rtw8851b_fw.bin
> rtw89_8851be 0000:01:00.0: xtal si not ready(R): offset=41
> rtw89_8851be 0000:01:00.0: xtal si not ready(W): offset=90 val=10
> mask=10
> rtw89_8851be 0000:01:00.0: failed to power on
> rtw89_8851be 0000:01:00.0: failed to setup chip information
> rtw89_8851be 0000:01:00.0: probe with driver rtw89_8851be failed with
> error -110

Try to disable d3cold before suspending by below steps:

1. use lspci to find the device address of RTL8851BE.
2. disable d3cold via sysfs
   echo 0 > /sys/bus/pci/devices/<device_address>/d3cold_allowed

Ping-Ke


      reply	other threads:[~2026-11-22  1:37 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-21  5:39 Bug report: Realtek RTL8851BE Wi-Fi does not recover from suspend Rik van Westendorp
2026-11-22  1:37 ` Ping-Ke Shih [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7c49b984f5e24dcbadb391e0acdcda4a@realtek.com \
    --to=pkshih@realtek.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=rik@ellarik.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox