From: Luciano Coelho <luciano.coelho@intel.com>
To: "Bjørn Mork" <bjorn@mork.no>
Cc: kvalo@codeaurora.org, linux-wireless@vger.kernel.org
Subject: Re: [PATCH 3/3] iwlwifi: add support for quz firmwares
Date: Tue, 02 Jul 2019 11:03:51 +0300 [thread overview]
Message-ID: <7cc05c6313c40484b0801228a2762ccfac35a02a.camel@intel.com> (raw)
In-Reply-To: <87k1el8ql9.fsf@miraculix.mork.no>
On Mon, 2019-05-20 at 10:42 +0200, Bjørn Mork wrote:
> Luca Coelho <luca@coelho.fi> writes:
>
> > --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h
> > +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h
> > @@ -549,6 +549,7 @@ extern const struct iwl_cfg iwl22000_2ac_cfg_hr;
> > extern const struct iwl_cfg iwl22000_2ac_cfg_hr_cdb;
> > extern const struct iwl_cfg iwl22000_2ac_cfg_jf;
> > extern const struct iwl_cfg iwl_ax101_cfg_qu_hr;
> > +extern const struct iwl_cfg iwl_ax101_cfg_quz_hr;
> > extern const struct iwl_cfg iwl22000_2ax_cfg_hr;
> > extern const struct iwl_cfg iwl_ax200_cfg_cc;
> > extern const struct iwl_cfg killer1650s_2ax_cfg_qu_b0_hr_b0;
> > diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
> > index aea6d03e545a..e539bc94eff7 100644
> > --- a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
> > +++ b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
> > @@ -327,6 +327,7 @@ enum {
> > #define CSR_HW_REV_TYPE_NONE (0x00001F0)
> > #define CSR_HW_REV_TYPE_QNJ (0x0000360)
> > #define CSR_HW_REV_TYPE_QNJ_B0 (0x0000364)
> > +#define CSR_HW_REV_TYPE_QUZ (0x0000354)
> > #define CSR_HW_REV_TYPE_HR_CDB (0x0000340)
> > #define CSR_HW_REV_TYPE_SO (0x0000370)
> > #define CSR_HW_REV_TYPE_TY (0x0000420)
> > diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
> > index 1d6f3053f233..79c1dc05f948 100644
> > --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
> > +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
> > @@ -3543,6 +3543,10 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
> > }
> > } else if (cfg == &iwl_ax101_cfg_qu_hr) {
> > if (CSR_HW_RF_ID_TYPE_CHIP_ID(trans->hw_rf_id) ==
> > + CSR_HW_RF_ID_TYPE_CHIP_ID(CSR_HW_RF_ID_TYPE_HR) &&
> > + trans->hw_rev == CSR_HW_REV_TYPE_QNJ_B0) {
> > + trans->cfg = &iwl22000_2ax_cfg_qnj_hr_b0;
> > + } else if (CSR_HW_RF_ID_TYPE_CHIP_ID(trans->hw_rf_id) ==
> > CSR_HW_RF_ID_TYPE_CHIP_ID(CSR_HW_RF_ID_TYPE_HR)) {
> > trans->cfg = &iwl_ax101_cfg_qu_hr;
> > } else if (CSR_HW_RF_ID_TYPE_CHIP_ID(trans->hw_rf_id) ==
>
> Did you intend to use CSR_HW_REV_TYPE_QUZ and iwl_cfg
> iwl_ax101_cfg_quz_hr here, or am I misunderstanding something?
>
> Must admit that I didn't actually read the code. Just happend to look
> at this patch briefly while glancing through linux-wireless... Sorry if
> I'just adding noise.
Sorry for the late reply! But yes, you are right, this was a merge
damage. I'll send a patch fixing it.
Thanks a lot for the attentive eyes!
--
Cheers,
Luca.
prev parent reply other threads:[~2019-07-02 8:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-22 12:47 [PATCH 0/3] iwlwifi: fixes intended for 5.1 2019-03-22 Luca Coelho
2019-03-22 12:47 ` [PATCH 1/3] iwlwifi: mvm: avoid possible deadlock in TX path Luca Coelho
2019-03-22 12:47 ` [PATCH 2/3] iwlwifi: mvm: update offloaded rate control on changes Luca Coelho
2019-03-22 12:47 ` [PATCH 3/3] iwlwifi: add support for quz firmwares Luca Coelho
2019-05-20 8:42 ` Bjørn Mork
2019-07-02 8:03 ` Luciano Coelho [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7cc05c6313c40484b0801228a2762ccfac35a02a.camel@intel.com \
--to=luciano.coelho@intel.com \
--cc=bjorn@mork.no \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox