Re: [PATCH 2/8] brcm: update bcm4329 firmware file

[Dmitry Osipenko <digetx@gmail.com>]

Hi,

08.12.2022 02:05, Arend van Spriel пишет:
> bump version from 4.220.48.0 to 4.218.248.44. Version numbering
> scheme is obscure but this is a more recent firmware file.
> 
> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> ---
>  brcm/brcmfmac4329-sdio.bin | Bin 253748 -> 246791 bytes
>  1 file changed, 0 insertions(+), 0 deletions(-)

This firmware version doesn't work on any of NVIDIA Tegra tablets
supported by upstream kernel, tested using next-20221216. Please revert
or fix, thanks!

Faulty 4.218.248.44 kernel log:

brcmfmac: brcmf_wcc_attach: executing
brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2),
device may have limited channels available
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4329/3 wl0: May 25 2012
17:57:45 version 4.218.248.44
ieee80211 phy0: brcmf_c_set_joinpref_default: Set join_pref error (-52)
ieee80211 phy0: brcmf_setup_wiphybands: rxchain unsupported
ieee80211 phy0: brcmf_construct_chaninfo: get chanspecs error (-52)
ieee80211 phy0: brcmf_setup_wiphybands: brcmf_construct_chaninfo failed
(-52)
ieee80211 phy0: brcmf_cfg80211_attach: Setting wiphy bands failed (-52)
ieee80211 phy0: brcmf_bus_started: failed: -12
ieee80211 phy0: brcmf_attach: dongle is not responding: err=-12
brcmfmac: brcmf_wcc_detach: executing
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed

Good 4.220.48.0 kernel log:

brcmfmac: brcmf_wcc_attach: executing
brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2),
device may have limited channels available
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4329/3 wl0: Sep  2 2011
14:48:19 version 4.220.48
ieee80211 phy0: brcmf_setup_wiphybands: rxchain unsupported