From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Subject: [PATCH rtw-next v3 01/14] wifi: rtw89: 8851b: Accept USB devices and load their MAC address
Date: Fri, 20 Jun 2025 21:53:36 +0300 [thread overview]
Message-ID: <8690ab79-c5ed-45ca-a234-7074ceb9ca70@gmail.com> (raw)
In-Reply-To: <d055bd81-6c79-46f5-8d6d-62185cc65630@gmail.com>
Make rtw8851b_read_efuse() accept USB devices and load the MAC address
from the correct offset.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add Acked-by.
v3:
- No change.
---
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851b.c b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
index 39df1a255095..6ba88ca2bab3 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
@@ -461,14 +461,6 @@ static int rtw8851b_pwr_off_func(struct rtw89_dev *rtwdev)
return 0;
}
-static void rtw8851b_efuse_parsing(struct rtw89_efuse *efuse,
- struct rtw8851b_efuse *map)
-{
- ether_addr_copy(efuse->addr, map->e.mac_addr);
- efuse->rfe_type = map->rfe_type;
- efuse->xtal_cap = map->xtal_k;
-}
-
static void rtw8851b_efuse_parsing_tssi(struct rtw89_dev *rtwdev,
struct rtw8851b_efuse *map)
{
@@ -549,12 +541,18 @@ static int rtw8851b_read_efuse(struct rtw89_dev *rtwdev, u8 *log_map,
switch (rtwdev->hci.type) {
case RTW89_HCI_TYPE_PCIE:
- rtw8851b_efuse_parsing(efuse, map);
+ ether_addr_copy(efuse->addr, map->e.mac_addr);
+ break;
+ case RTW89_HCI_TYPE_USB:
+ ether_addr_copy(efuse->addr, map->u.mac_addr);
break;
default:
return -EOPNOTSUPP;
}
+ efuse->rfe_type = map->rfe_type;
+ efuse->xtal_cap = map->xtal_k;
+
rtw89_info(rtwdev, "chip rfe_type is %d\n", efuse->rfe_type);
return 0;
--
2.49.0
next prev parent reply other threads:[~2025-06-20 18:53 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
2025-06-20 18:53 ` Bitterblue Smith [this message]
2025-06-20 18:54 ` [PATCH rtw-next v3 02/14] wifi: rtw89: Make dle_mem in rtw89_chip_info an array Bitterblue Smith
2025-06-24 5:42 ` Ping-Ke Shih
2025-06-20 18:56 ` [PATCH rtw-next v3 03/14] wifi: rtw89: Make hfc_param_ini " Bitterblue Smith
2025-06-24 5:45 ` Ping-Ke Shih
2025-06-20 18:56 ` [PATCH rtw-next v3 04/14] wifi: rtw89: Add rtw8851b_dle_mem_usb{2,3} Bitterblue Smith
2025-06-20 18:57 ` [PATCH rtw-next v3 05/14] wifi: rtw89: Add rtw8851b_hfc_param_ini_usb Bitterblue Smith
2025-06-20 18:58 ` [PATCH rtw-next v3 06/14] wifi: rtw89: Disable deep power saving for USB/SDIO Bitterblue Smith
2025-06-24 5:50 ` Ping-Ke Shih
2025-06-20 18:59 ` [PATCH rtw-next v3 07/14] wifi: rtw89: Add extra TX headroom for USB Bitterblue Smith
2025-06-20 19:00 ` [PATCH rtw-next v3 08/14] wifi: rtw89: Hide some errors when the device is unplugged Bitterblue Smith
2025-06-20 19:01 ` [PATCH rtw-next v3 09/14] wifi: rtw89: 8851b: Modify rtw8851b_pwr_{on,off}_func() for USB Bitterblue Smith
2025-06-24 5:51 ` Ping-Ke Shih
2025-06-20 19:02 ` [PATCH rtw-next v3 10/14] wifi: rtw89: Fix rtw89_mac_power_switch() " Bitterblue Smith
2025-06-24 5:52 ` Ping-Ke Shih
2025-06-20 19:03 ` [PATCH rtw-next v3 11/14] wifi: rtw89: Add some definitions " Bitterblue Smith
2025-06-20 19:04 ` [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h} Bitterblue Smith
2025-06-23 20:08 ` Bitterblue Smith
2025-06-24 6:18 ` Ping-Ke Shih
2025-06-20 19:05 ` [PATCH rtw-next v3 13/14] wifi: rtw89: Add rtw8851bu.c Bitterblue Smith
2025-06-20 19:05 ` [PATCH rtw-next v3 14/14] wifi: rtw89: Enable the new USB modules Bitterblue Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8690ab79-c5ed-45ca-a234-7074ceb9ca70@gmail.com \
--to=rtl8821cerfe2@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox