From: Alex Romosan <romosan@sycorax.lbl.gov>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org, ilw@linux.intel.com
Subject: Re: iwlwifi unable to reconnect after suspend since v3.9-rc1
Date: Wed, 27 Mar 2013 12:33:42 -0700 [thread overview]
Message-ID: <871ub0zlgp.fsf@sycorax.lbl.gov> (raw)
In-Reply-To: <1364411696.8388.21.camel@jlt4.sipsolutions.net> (message from Johannes Berg on Wed, 27 Mar 2013 20:14:56 +0100)
Johannes Berg <johannes@sipsolutions.net> writes:
> Ah, right, I guess I'm a little surprised it ever works at all ... We'll
> see in the log though.
this is when it works on startup:
[ 18.336462] wlan0: authenticate with xx:xx:xx:xx:xx:xx
[ 18.377276] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[ 18.395294] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 0 -> 1 (1)
[ 18.395309] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status SUCCESS (0x00000201)
[ 18.395317] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x800d retries 0, idx=0 ssn=1 seq_ctl=0xc0
[ 18.395349] wlan0: authenticated
[ 18.412835] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[ 18.428858] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 1 -> 2 (2)
[ 18.428874] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status SUCCESS (0x00000201)
[ 18.428882] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x400d retries 0, idx=1 ssn=2 seq_ctl=0xd0
[ 18.428983] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x401 status=0 aid=1)
[ 18.449793] wlan0: associated
and then after i take the interface down and try to bring it back up:
[ 99.097061] wlan0: deauthenticating from xx:xx:xx:xx:xx:xx by local choice (reason=3)
[ 99.099874] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 43 -> 44 (44)
[ 99.099891] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status SUCCESS (0x00000201)
[ 99.099901] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x400d retries 0, idx=43 ssn=44 seq_ctl=0x110
[ 99.103816] cfg80211: Calling CRDA to update world regulatory domain
[ 99.116363] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 99.116596] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 99.247069] cfg80211: World regulatory domain updated:
[ 99.247082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 99.247090] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 99.247096] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 99.247102] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 99.247107] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 99.247112] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 110.171839] wlan0: authenticate with xx:xx:xx:xx:xx:xx
[ 110.182503] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[ 110.185173] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 0 -> 1 (1)
[ 110.185191] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status PASSIVE_NO_RX (0x00000090)
[ 110.185200] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x800d retries 0, idx=0 ssn=1 seq_ctl=0x60
[ 110.187879] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 1 -> 2 (2)
[ 110.187890] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status PASSIVE_NO_RX (0x00000090)
[ 110.187899] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x400d retries 0, idx=1 ssn=2 seq_ctl=0x60
[ 110.187927] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 2/3)
[ 110.190721] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 2 -> 3 (3)
[ 110.190742] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status PASSIVE_NO_RX (0x00000090)
[ 110.190752] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x800d retries 0, idx=2 ssn=3 seq_ctl=0x70
[ 110.193598] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 3 -> 4 (4)
[ 110.193616] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status PASSIVE_NO_RX (0x00000090)
[ 110.193625] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x400d retries 0, idx=3 ssn=4 seq_ctl=0x70
[ 110.194594] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 3/3)
[ 110.197333] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 4 -> 5 (5)
[ 110.197351] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status PASSIVE_NO_RX (0x00000090)
[ 110.197361] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x800d retries 0, idx=4 ssn=5 seq_ctl=0x80
[ 110.200088] iwlwifi 0000:03:00.0: I iwl_trans_pcie_reclaim [Q 0] 5 -> 6 (6)
[ 110.200105] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx TXQ 0 status PASSIVE_NO_RX (0x00000090)
[ 110.200115] iwlwifi 0000:03:00.0: I iwlagn_rx_reply_tx initial_rate 0x400d retries 0, idx=5 ssn=6 seq_ctl=0x80
[ 110.200184] wlan0: authentication with xx:xx:xx:xx:xx:xx timed out
--alex--
--
| I believe the moment is at hand when, by a paranoiac and active |
| advance of the mind, it will be possible (simultaneously with |
| automatism and other passive states) to systematize confusion |
| and thus to help to discredit completely the world of reality. |
next prev parent reply other threads:[~2013-03-27 19:33 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 20:52 iwlwifi unable to reconnect after suspend since v3.9-rc1 Alex Romosan
2013-03-27 13:14 ` Johannes Berg
2013-03-27 17:35 ` Alex Romosan
2013-03-27 17:41 ` Johannes Berg
2013-03-27 18:02 ` Alex Romosan
2013-03-27 19:02 ` Johannes Berg
2013-03-27 19:08 ` Alex Romosan
2013-03-27 19:11 ` Johannes Berg
2013-03-27 19:14 ` Johannes Berg
2013-03-27 19:33 ` Alex Romosan [this message]
2013-03-27 19:44 ` Johannes Berg
2013-03-27 20:03 ` Alex Romosan
2013-03-27 20:13 ` Johannes Berg
2013-03-27 20:29 ` Alex Romosan
2013-03-27 17:42 ` Johannes Berg
2013-03-27 17:48 ` Alex Romosan
2013-03-27 17:54 ` Johannes Berg
2013-03-27 18:58 ` Alex Romosan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871ub0zlgp.fsf@sycorax.lbl.gov \
--to=romosan@sycorax.lbl.gov \
--cc=ilw@linux.intel.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).