* Dependency required for wil6210 kernel module
@ 2018-03-10 7:22 Arjav Parikh
2018-03-10 8:29 ` Kalle Valo
0 siblings, 1 reply; 3+ messages in thread
From: Arjav Parikh @ 2018-03-10 7:22 UTC (permalink / raw)
To: linux-wireless
Hi,
Currently I am working to minimize the filesystem for one of my
project. In my project I only want to add support for USB & Wireless
(wil6210). To minimize the filesystem I disabled the unwanted things
like Iptables, VLAN, VPN, Ethernet support etc from .config and
brought my image size from 22 MB to 8.9 MB.
Now when I did the ifconfig wlan0 up I get below error:
wil6210 0000:01:00.0 wlan0: wil_open: Failed to register with NSS
In Ideal case when I enter the above command I should get below logs:
wil6210 0000:01:00.0 wlan0: wil_open: Registered with NSS
I checked the dependency for wil6210.ko module and they are cfg80211 &
compat and they both are enabled.
Can any one tell me which libraries/modules I have mistakenly disabled
which is causing this error.
--
Thanks & Regards,
Arjav Parikh
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Dependency required for wil6210 kernel module
2018-03-10 7:22 Dependency required for wil6210 kernel module Arjav Parikh
@ 2018-03-10 8:29 ` Kalle Valo
[not found] ` <CADoF8+Aqk8OSEnby5k6Wq1fyXRtaPwUgtTwxrWmkW_7HBNZiTA@mail.gmail.com>
0 siblings, 1 reply; 3+ messages in thread
From: Kalle Valo @ 2018-03-10 8:29 UTC (permalink / raw)
To: Arjav Parikh; +Cc: linux-wireless
Arjav Parikh <parikharjav24@gmail.com> writes:
> Currently I am working to minimize the filesystem for one of my
> project. In my project I only want to add support for USB & Wireless
> (wil6210). To minimize the filesystem I disabled the unwanted things
> like Iptables, VLAN, VPN, Ethernet support etc from .config and
> brought my image size from 22 MB to 8.9 MB.
>
> Now when I did the ifconfig wlan0 up I get below error:
> wil6210 0000:01:00.0 wlan0: wil_open: Failed to register with NSS
>
> In Ideal case when I enter the above command I should get below logs:
> wil6210 0000:01:00.0 wlan0: wil_open: Registered with NSS
>
> I checked the dependency for wil6210.ko module and they are cfg80211 &
> compat and they both are enabled.
>
> Can any one tell me which libraries/modules I have mistakenly disabled
> which is causing this error.
What kernel are you using? The NSS error messages imply that it's
something else than upstream (kernel.org) kernel.
--
Kalle Valo
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Dependency required for wil6210 kernel module
[not found] ` <CADoF8+Aqk8OSEnby5k6Wq1fyXRtaPwUgtTwxrWmkW_7HBNZiTA@mail.gmail.com>
@ 2018-03-10 8:56 ` Kalle Valo
0 siblings, 0 replies; 3+ messages in thread
From: Kalle Valo @ 2018-03-10 8:56 UTC (permalink / raw)
To: Arjav Parikh; +Cc: linux-wireless
Arjav Parikh <parikharjav24@gmail.com> writes:
> I am using kernel version 4.4.60 built with QSDK.
This list is about upstream kernel, not QSDK. And please don't top post.
--
Kalle Valo
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-03-10 8:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-10 7:22 Dependency required for wil6210 kernel module Arjav Parikh
2018-03-10 8:29 ` Kalle Valo
[not found] ` <CADoF8+Aqk8OSEnby5k6Wq1fyXRtaPwUgtTwxrWmkW_7HBNZiTA@mail.gmail.com>
2018-03-10 8:56 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).