From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:31345 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751582AbaBMPrC (ORCPT ); Thu, 13 Feb 2014 10:47:02 -0500 From: Kalle Valo To: Bartosz Markowski CC: "linux-wireless@vger.kernel.org" , ath10k Subject: Re: [PATCH] ath10k: AP: handle HT station which does not have HT RX MCS References: <1392034375-13532-1-git-send-email-bartosz.markowski@tieto.com> <8761omdqe5.fsf@kamboji.qca.qualcomm.com> Date: Thu, 13 Feb 2014 17:46:53 +0200 In-Reply-To: (Bartosz Markowski's message of "Tue, 11 Feb 2014 09:10:56 +0100") Message-ID: <874n438176.fsf@kamboji.qca.qualcomm.com> (sfid-20140213_164716_020419_04B9CE08) MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: linux-wireless-owner@vger.kernel.org List-ID: Bartosz Markowski writes: > On 11 February 2014 09:06, Kalle Valo wrote: >> Bartosz Markowski writes: >> >>> This is a workaround for HT-enabled STAs which break the spec >>> and have no HT capabilities RX mask (no HT RX MCS map). >>> >>> As per spec, in section 20.3.5 Modulation and coding scheme (MCS), >>> MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs. >>> >>> Firmware asserts if such situation occurs. >>> >>> Signed-off-by: Bartosz Markowski >> >> This conflicted with Marek K's patch "ath10k: Set proper nss value for >> the peer". Please check that my resolution in ath-next-test is correct: >> >> https://github.com/kvalo/ath/commit/d56aa0e779c17f8048a70a9dbd5228b54d9a712e > > Looks good. Thanks, applied. -- Kalle Valo