From: Kalle Valo <kvalo@kernel.org>
To: SALVATORE BUONO <tottobuono@gmail.com>
Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Subject: Re: Problem with driver ath10k_pci
Date: Mon, 05 Aug 2024 13:22:00 +0300 [thread overview]
Message-ID: <877ccvjmlz.fsf@kernel.org> (raw)
In-Reply-To: <CAH_QiWBD3DdGL-GocHjakJvwrZNMzoiJ+RfCm5iiZf8msbbJ8g@mail.gmail.com> (SALVATORE BUONO's message of "Fri, 2 Aug 2024 20:55:52 +0200")
SALVATORE BUONO <tottobuono@gmail.com> writes:
> Good morning, there is a problem with this driver with new version of
> ubuntu, since before I update to 24.04 it works correctly, but now it does
> not work anymore after sleep/suspension. It disconnects and I tried a lot
> of commands to restart the wifi module but it does not work. This is the
> discussion on ubuntu forum, but no solution is found. Can you fix it?
>
>
> *Salvatore Buono*
> salvatore@salvatore-Inspiron-5515:~$ sudo dmesg | grep ath10k
> [ 3.509206] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
> [ 3.511043] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
> [ 3.734071] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310
> [ 3.734081] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
> [ 3.734432] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
> [ 3.799439] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> [ 3.881223] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> [ 5.804589] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
> [ 394.964239] ath10k_pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000b address=0xfb294f50 flags=0x0070]
> [ 402.843038] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
> [ 403.045772] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310
> [ 403.045788] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
> [ 403.046353] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
> [ 403.110616] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> [ 403.197531] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> [ 403.259722] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
> [ 418.545075] ath10k_pci 0000:02:00.0: timed out waiting peer stats info
> [ 423.537127] ath10k_pci 0000:02:00.0: wmi command 90113 timeout, restarting hardware
> [ 423.537147] ath10k_pci 0000:02:00.0: could not request stats (-11)
> [ 423.549132] ath10k_pci 0000:02:00.0: could not request peer stats info: -108
> [ 423.559691] ath10k_pci 0000:02:00.0: failed to read hi_board_data address: -16
> [ 426.587606] ath10k_pci 0000:02:00.0: failed to receive initialized event from target: 00000000
> [ 429.603807] ath10k_pci 0000:02:00.0: failed to receive initialized event from target: 00000000
> [ 429.603824] ath10k_pci 0000:02:00.0: failed to wait for target init: -110
> [ 429.606647] ath10k_pci 0000:02:00.0: failed to delete WMI vdev 1: -108
> [ 429.606657] ath10k_pci 0000:02:00.0: failed to set 2g txpower 46: -108
> [ 429.606661] ath10k_pci 0000:02:00.0: failed to setup tx power 23: -108
> [ 429.606664] ath10k_pci 0000:02:00.0: failed to recalc tx power: -108
> [ 429.606855] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 1 ar-state 2): 5000
> [ 429.606898] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 1 ar-state 2): 5000
You need to report this to Ubuntu. We don't support distro kernels, only
vanilla kernel.org releases.
Adding also ath10k list.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
prev parent reply other threads:[~2024-08-05 10:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-02 18:55 Problem with driver ath10k_pci SALVATORE BUONO
2024-08-05 10:22 ` Kalle Valo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877ccvjmlz.fsf@kernel.org \
--to=kvalo@kernel.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=tottobuono@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).