From: Kalle Valo <kvalo@codeaurora.org>
To: Jouni Malinen <jouni@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
Rameshkumar Sundaram <ramess@codeaurora.org>,
Sathishkumar Muruganandam <murugana@codeaurora.org>
Subject: Re: [PATCH 10/12] ath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware
Date: Tue, 28 Sep 2021 13:46:58 +0300 [thread overview]
Message-ID: <87a6jxq8nx.fsf@codeaurora.org> (raw)
In-Reply-To: <20210721212029.142388-10-jouni@codeaurora.org> (Jouni Malinen's message of "Thu, 22 Jul 2021 00:20:27 +0300")
Jouni Malinen <jouni@codeaurora.org> writes:
> From: Rameshkumar Sundaram <ramess@codeaurora.org>
>
> HTT_PPDU_STATS_CFG_PDEV_ID bit mask for target FW PPDU stats request
> message was set as bit 8 to 15. Bit 8 is reserved for soc stats and
> pdev id starts from bit 9. Hence change the bitmask as bit 9 to 15
> and fill the proper pdev id in the request message.
>
> Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
> Tested on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1
>
> Fixes: 701e48a43e15 ("ath11k: add packet log support for QCA6390")
>
> Co-developed-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
> Signed-off-by: Rameshkumar Sundaram <ramess@codeaurora.org>
> Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
> ---
> drivers/net/wireless/ath/ath11k/dp.h | 3 ++-
> drivers/net/wireless/ath/ath11k/dp_tx.c | 2 +-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath11k/dp.h b/drivers/net/wireless/ath/ath11k/dp.h
> index b2e7621969c5..522d3a6ce253 100644
> --- a/drivers/net/wireless/ath/ath11k/dp.h
> +++ b/drivers/net/wireless/ath/ath11k/dp.h
> @@ -541,7 +541,8 @@ struct htt_ppdu_stats_cfg_cmd {
> } __packed;
>
> #define HTT_PPDU_STATS_CFG_MSG_TYPE GENMASK(7, 0)
> -#define HTT_PPDU_STATS_CFG_PDEV_ID GENMASK(15, 8)
> +#define HTT_PPDU_STATS_CFG_SOC_STATS BIT(8)
> +#define HTT_PPDU_STATS_CFG_PDEV_ID GENMASK(15, 9)
This part is clear after reading the commit log.
> --- a/drivers/net/wireless/ath/ath11k/dp_tx.c
> +++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
> @@ -906,7 +906,7 @@ int ath11k_dp_tx_htt_h2t_ppdu_stats_req(struct ath11k *ar, u32 mask)
> cmd->msg = FIELD_PREP(HTT_PPDU_STATS_CFG_MSG_TYPE,
> HTT_H2T_MSG_TYPE_PPDU_STATS_CFG);
>
> - pdev_mask = 1 << (i + 1);
> + pdev_mask = 1 << (ar->pdev_idx + i);
> cmd->msg |= FIELD_PREP(HTT_PPDU_STATS_CFG_PDEV_ID, pdev_mask);
> cmd->msg |= FIELD_PREP(HTT_PPDU_STATS_CFG_TLV_TYPE_BITMASK, mask);
But this part isn't. All I can see in the commit log is a vague comment
"and fill the proper pdev id in the request message" and nothing else.
Please provide a proper explanation for this change and I can then add
that to the commit log.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
next prev parent reply other threads:[~2021-09-28 10:47 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-21 21:20 [PATCH 01/12] ath11k: Fix pktlog lite rx events Jouni Malinen
2021-07-21 21:20 ` [PATCH 02/12] ath11k: Update pdev tx and rx firmware stats Jouni Malinen
2021-07-21 21:20 ` [PATCH 03/12] ath11k: Avoid reg rules update during firmware recovery Jouni Malinen
2021-07-21 21:20 ` [PATCH 04/12] ath11k: Avoid race during regd updates Jouni Malinen
2021-07-21 21:20 ` [PATCH 05/12] ath11k: Add vdev start flag to disable hardware encryption Jouni Malinen
2021-07-21 21:20 ` [PATCH 06/12] ath11k: Assign free_vdev_map value before ieee80211_register_hw Jouni Malinen
2021-07-21 21:20 ` [PATCH 07/12] ath11k: Fix crash during firmware recovery on reo cmd ring access Jouni Malinen
2021-07-21 21:20 ` [PATCH 08/12] ath11k: Avoid "No VIF found" warning message Jouni Malinen
2021-07-21 21:20 ` [PATCH 09/12] ath11k: Add wmi peer create conf event in wmi_tlv_event_id Jouni Malinen
2021-07-21 21:20 ` [PATCH 10/12] ath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware Jouni Malinen
2021-09-28 10:46 ` Kalle Valo [this message]
2021-09-28 12:01 ` Rameshkumar Sundaram
2021-11-12 8:01 ` Kalle Valo
2021-07-21 21:20 ` [PATCH 11/12] ath11k: Clear auth flag only for actual association in security mode Jouni Malinen
2021-07-21 21:20 ` [PATCH 12/12] ath11k: Change QCN9074 firmware to operate in mode-2 Jouni Malinen
2021-11-12 8:19 ` Kalle Valo
2021-12-08 12:39 ` Anilkumar Kolli
2021-09-28 10:58 ` [PATCH 01/12] ath11k: Fix pktlog lite rx events Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a6jxq8nx.fsf@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=jouni@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=murugana@codeaurora.org \
--cc=ramess@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).