From: Kalle Valo <kvalo@qca.qualcomm.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>, <ath10k@lists.infradead.org>,
<ath6kl@lists.infradead.org>
Subject: Pull request: ath 20141024
Date: Fri, 24 Oct 2014 14:44:32 +0300 [thread overview]
Message-ID: <87bnp1ofof.fsf@kamboji.qca.qualcomm.com> (raw)
Hi John,
here are the latest ath10k patches plus a small logging change to ath6kl
and wil6210. Unfortunately this time there's a small conflict in
drivers/net/wireless/ath/wil6210/wil6210.h but luckily it's easy to fix.
Here's an example how I propose to resolve it:
----------------------------------------------------------------------
#define wil_to_ndev(i) (wil_to_wdev(i)->netdev)
#define ndev_to_wil(n) (wdev_to_wil(n->ieee80211_ptr))
#define wil_to_pcie_dev(i) (&i->pdev->dev)
__printf(2, 3)
void wil_dbg_trace(struct wil6210_priv *wil, const char *fmt, ...);
__printf(2, 3)
void wil_err(struct wil6210_priv *wil, const char *fmt, ...);
__printf(2, 3)
void wil_info(struct wil6210_priv *wil, const char *fmt, ...);
#define wil_dbg(wil, fmt, arg...) do { \
netdev_dbg(wil_to_ndev(wil), fmt, ##arg); \
wil_dbg_trace(wil, fmt, ##arg); \
} while (0)
#define wil_dbg_irq(wil, fmt, arg...) wil_dbg(wil, "DBG[ IRQ]" fmt, ##arg)
#define wil_dbg_txrx(wil, fmt, arg...) wil_dbg(wil, "DBG[TXRX]" fmt, ##arg)
----------------------------------------------------------------------
I think a lesson learned here is that I should not apply patches which
touch wil6210 and instead ask the submitter to split the patch. Sorry
for this.
Here's a changelog for the pull request:
----------------------------------------------------------------------
Major changes are:
o ethtool support (Ben)
o print dev string prefix with debug hex buffers dump (Michal)
o debugfs file to read calibration data from the firmware verification
purposes (me)
o fix fw_stats debugfs file, now results are more reliable (Michal)
o firmware crash counters via debugfs (Ben&me)
o various tracing points to debug firmware (Rajkumar)
o make it possible to provide firmware calibration data via a file (me)
And we have quite a lot of smaller fixes and clean up.
----------------------------------------------------------------------
Please pull and let me know if you have any problems.
Kalle
----------------------------------------------------------------------
The following changes since commit b25f32cb02155d68c690255ba846796a1c248fd3:
ath10k: use ether_addr_copy() (2014-09-18 10:47:03 +0300)
are available in the git repository at:
git://github.com/kvalo/ath.git tags/for-linville-20141024
for you to fetch changes up to 84cbf3a7592879810f80cece6c7f736f099ab163:
ath10k: split ce pipe init/alloc further (2014-10-23 16:41:32 +0300)
----------------------------------------------------------------
Bartosz Markowski (1):
ath10k: advertise all possible firmware(-api) files
Ben Greear (3):
ath10k: add firmware crash counters
ath10k: support ethtool stats
ath10k: use 64-bit vdev map
Janusz Dziedzic (2):
ath10k: don't create bssid peer for ibss
ath10k: fix WMI scan command length
Joe Perches (1):
ath: change logging functions to return void
Kalle Valo (6):
ath10k: don't enable interrupts for the diagnostic window
ath10k: add diag_read() to hif ops
ath10k: add cal_data debugfs file
ath10k: add back enum ath10k_bus
ath10k: refactor ath10k_init_download_firmware()
ath10k: retrieve calibration data from file
Michal Kazior (26):
ath10k: workaround fw beaconing bug
ath10k: fix tx/rx chainmask init
ath10k: remove unused pdev_set_channel command
ath10k: deduplicate wmi_channel code
ath10k: deduplicate host mem chunk code
ath10k: relocate wmi attach/deatch functions
ath10k: deduplicate wmi service ready logic
ath10k: clean up phyerr code
ath10k: unify wmi event function names
ath10k: re-work scan start command building
ath10k: print wmi version info
ath10k: dump hex bytes with dev string prefix
ath10k: add debug dump for pci rx
ath10k: split wmi stats parsing
ath10k: rename fw_stats related stuff
ath10k: request fw_stats once on open
ath10k: fix fw stats processing
ath10k: warn on unhandled htt events
ath10k: clean up assoc code
ath10k: skip some commands on reassoc
ath10k: clean up sta auth/assoc code
ath10k: simplify computation of mgmt rx band
ath10k: use bss_info as txpower source
ath10k: re-disable interrupts after target init
ath10k: mask/unmask msi fw irq
ath10k: split ce pipe init/alloc further
Rajkumar Manoharan (6):
ath10k: add support to configure pktlog filter
ath10k: add tracing for ath10k_htt_pktlog
ath10k: add tracing for rx descriptor
ath10k: add tracing for tx info
ath10k: add tracing for frame transmission
ath10k: fix kernel panic while shutting down AP
drivers/net/wireless/ath/ath10k/ce.c | 83 ++-
drivers/net/wireless/ath/ath10k/ce.h | 21 +-
drivers/net/wireless/ath/ath10k/core.c | 111 ++-
drivers/net/wireless/ath/ath10k/core.h | 80 +-
drivers/net/wireless/ath/ath10k/debug.c | 891 ++++++++++++++++------
drivers/net/wireless/ath/ath10k/debug.h | 40 +-
drivers/net/wireless/ath/ath10k/hif.h | 10 +
drivers/net/wireless/ath/ath10k/htt.h | 2 +-
drivers/net/wireless/ath/ath10k/htt_rx.c | 20 +-
drivers/net/wireless/ath/ath10k/htt_tx.c | 2 +
drivers/net/wireless/ath/ath10k/hw.h | 17 +-
drivers/net/wireless/ath/ath10k/mac.c | 509 +++++++------
drivers/net/wireless/ath/ath10k/mac.h | 1 +
drivers/net/wireless/ath/ath10k/pci.c | 203 +++--
drivers/net/wireless/ath/ath10k/spectral.c | 34 +-
drivers/net/wireless/ath/ath10k/spectral.h | 8 +-
drivers/net/wireless/ath/ath10k/trace.h | 163 ++++
drivers/net/wireless/ath/ath10k/txrx.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 1116 ++++++++++++++++------------
drivers/net/wireless/ath/ath10k/wmi.h | 273 ++-----
drivers/net/wireless/ath/ath6kl/common.h | 2 +-
drivers/net/wireless/ath/ath6kl/debug.c | 28 +-
drivers/net/wireless/ath/ath6kl/debug.h | 13 +-
drivers/net/wireless/ath/wil6210/debug.c | 14 +-
drivers/net/wireless/ath/wil6210/wil6210.h | 7 +-
25 files changed, 2264 insertions(+), 1385 deletions(-)
--
Kalle Valo
next reply other threads:[~2014-10-24 11:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-24 11:44 Kalle Valo [this message]
2014-10-27 18:10 ` Pull request: ath 20141024 John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bnp1ofof.fsf@kamboji.qca.qualcomm.com \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=ath6kl@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).