Re: [PATCH] at76c50x-usb: support cfg80211 scanning

[Kalle Valo <kalle.valo@iki.fi>]

Jason Andryuk <jandryuk@gmail.com> writes:

> I thought before I was not getting any scan results.  I may have been
> wrong.  However right now with the driver from wireless-testing
> 2009-02-18, 4 APs show up in NetworkManager.  Unfortunately, my AP is
> not one of them.  

What's your distance to the AP?

> No signal strength is reported for any of them.

Yes, this is a know issue. I'll try to fix it soon.

> Curiously, there are distinct results for each of at76c50x-usb, a
> semi-operational iwl3945 and the functional rtl8187.
>
> CMD_SCAN is receiving a lot of status 0x03 CMD_STATUS_INVALID_PARAMETER
>
> With debug=0xf022c001 I get the output below.  I was wondering if
> status=0x03 was being received because CMD_SET_MIB was called before
> CMD_SCAN's status was checked.  Hopefully you can make some sense out
> of the below logs.

After a quick look I didn't find anything, but I will investigate this
more.

Is at76_usb (the staging driver) is working fine with your device? Can
you take logs from it so that we can compare?

-- 
Kalle Valo