From: Kalle Valo <kvalo@kernel.org>
To: <quic_haric@quicinc.com>
Cc: <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH] ath11k: disable spectral scan during spectral deinit
Date: Wed, 20 Apr 2022 19:08:51 +0300 [thread overview]
Message-ID: <87levzohyk.fsf@kernel.org> (raw)
In-Reply-To: <87fsmooz83.fsf@kernel.org> (Kalle Valo's message of "Fri, 08 Apr 2022 09:39:40 +0300")
Kalle Valo <kvalo@kernel.org> writes:
> <quic_haric@quicinc.com> writes:
>
>> From: Hari Chandrakanthan <quic_haric@quicinc.com>
>>
>> When ath11k modules are removed using rmmod with spectral scan enabled,
>> crash is observed. Different crash trace is observed for each crash.
>>
>> Send spectral scan disable WMI command to firmware before cleaning
>> the spectral dbring in the spectral_deinit API to avoid this crash.
>>
>> call trace from one of the crash observed:
>> [ 1252.880802] Unable to handle kernel NULL pointer dereference at
>> virtual address 00000008
>> [ 1252.882722] pgd = 0f42e886
>> [ 1252.890955] [00000008] *pgd=00000000
>> [ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
>> [ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0
>> [ 1253.115261] Hardware name: Generic DT based system
>> [ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k]
>> [ 1253.125940] LR is at 0x88e31017
>> [ 1253.132448] pc : [<7f9387b8>] lr : [<88e31017>] psr: a0000193
>> [ 1253.135488] sp : 80d01bc8 ip : 00000001 fp : 970e0000
>> [ 1253.141737] r10: 88e31000 r9 : 970ec000 r8 : 00000080
>> [ 1253.146946] r7 : 94734040 r6 : a0000113 r5 : 00000057 r4 : 00000000
>> [ 1253.152159] r3 : e18cb694 r2 : 00000217 r1 : 1df1f000 r0 : 00000001
>> [ 1253.158755] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
>> [ 1253.165266] Control: 10c0383d Table: 5e71006a DAC: 00000055
>> [ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141)
>> [ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k])
>> from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4
>> [ath11k])
>> [ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event
>> [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc
>> [ath11k])
>> [ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from
>> [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k])
>> [ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler
>> [ath11k]) from [<7f91308c>]
>> (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k])
>> [ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k])
>> from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci])
>> [ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci])
>> from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8)
>> [ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from
>> [<803021e8>] (__do_softirq+0x130/0x2d0)
>> [ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8)
>> [ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>]
>> (__handle_domain_irq+0x60/0xb4)
>> [ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>]
>> (gic_handle_irq+0x4c/0x90)
>> [ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)
>>
>> Tested on : WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1
>
> Tested-on tag is not in correct format, but I can fix that.
Actuall I cannot as I don't know on what hardware you tested this. So
what hardware did you use?
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
next prev parent reply other threads:[~2022-04-20 16:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 5:39 [PATCH] ath11k: disable spectral scan during spectral deinit quic_haric
2022-04-08 6:39 ` Kalle Valo
2022-04-20 16:08 ` Kalle Valo [this message]
2022-04-26 9:55 ` Hari Chandrakanthan (QUIC)
2022-04-26 10:03 ` Kalle Valo
2022-04-27 7:28 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87levzohyk.fsf@kernel.org \
--to=kvalo@kernel.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_haric@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).