* [PATCH v4 0/4] ath11k: add feature for device recovery
@ 2021-11-16 4:15 Wen Gong
2021-11-16 4:15 ` [PATCH v4 1/4] ath11k: add ath11k_qmi_free_resource() for recovery Wen Gong
` (3 more replies)
0 siblings, 4 replies; 10+ messages in thread
From: Wen Gong @ 2021-11-16 4:15 UTC (permalink / raw)
To: ath11k; +Cc: linux-wireless, quic_wgong
v4: add patch "ath11k: fix invalid m3 buffer address"
recovery will fail when download firmware without this patch
v3: remove time_left set but not used in
"ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base"
v2: s/initilized/initialized in commit log of patch
"ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base"
Add support for device recovery.
Carl Huang (1):
ath11k: fix invalid m3 buffer address
Wen Gong (3):
ath11k: add ath11k_qmi_free_resource() for recovery
ath11k: add support for device recovery for QCA6390
ath11k: add synchronization operation between reconfigure of mac80211
and ath11k_base
drivers/net/wireless/ath/ath11k/core.c | 119 +++++++++++++++++++++++--
drivers/net/wireless/ath/ath11k/core.h | 18 ++++
drivers/net/wireless/ath/ath11k/mac.c | 40 +++++++++
drivers/net/wireless/ath/ath11k/mhi.c | 33 +++++++
drivers/net/wireless/ath/ath11k/pci.c | 3 +
drivers/net/wireless/ath/ath11k/qmi.c | 6 ++
drivers/net/wireless/ath/ath11k/qmi.h | 1 +
7 files changed, 212 insertions(+), 8 deletions(-)
--
2.31.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v4 1/4] ath11k: add ath11k_qmi_free_resource() for recovery 2021-11-16 4:15 [PATCH v4 0/4] ath11k: add feature for device recovery Wen Gong @ 2021-11-16 4:15 ` Wen Gong 2021-11-17 8:48 ` Kalle Valo 2021-11-16 4:15 ` [PATCH v4 2/4] ath11k: fix invalid m3 buffer address Wen Gong ` (2 subsequent siblings) 3 siblings, 1 reply; 10+ messages in thread From: Wen Gong @ 2021-11-16 4:15 UTC (permalink / raw) To: ath11k; +Cc: linux-wireless, quic_wgong ath11k_qmi_free_target_mem_chunk() and ath11k_qmi_m3_free() is static in qmi.c, they are needed for recovery, export them in a new function. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> --- drivers/net/wireless/ath/ath11k/qmi.c | 5 +++++ drivers/net/wireless/ath/ath11k/qmi.h | 1 + 2 files changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c index b5e34d670715..1f474a10d1b0 100644 --- a/drivers/net/wireless/ath/ath11k/qmi.c +++ b/drivers/net/wireless/ath/ath11k/qmi.c @@ -2811,3 +2811,8 @@ void ath11k_qmi_deinit_service(struct ath11k_base *ab) } EXPORT_SYMBOL(ath11k_qmi_deinit_service); +void ath11k_qmi_free_resource(struct ath11k_base *ab) +{ + ath11k_qmi_free_target_mem_chunk(ab); + ath11k_qmi_m3_free(ab); +} diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h index 3d5930330703..692e796ff839 100644 --- a/drivers/net/wireless/ath/ath11k/qmi.h +++ b/drivers/net/wireless/ath/ath11k/qmi.h @@ -471,5 +471,6 @@ void ath11k_qmi_event_work(struct work_struct *work); void ath11k_qmi_msg_recv_work(struct work_struct *work); void ath11k_qmi_deinit_service(struct ath11k_base *ab); int ath11k_qmi_init_service(struct ath11k_base *ab); +void ath11k_qmi_free_resource(struct ath11k_base *ab); #endif -- 2.31.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v4 1/4] ath11k: add ath11k_qmi_free_resource() for recovery 2021-11-16 4:15 ` [PATCH v4 1/4] ath11k: add ath11k_qmi_free_resource() for recovery Wen Gong @ 2021-11-17 8:48 ` Kalle Valo 0 siblings, 0 replies; 10+ messages in thread From: Kalle Valo @ 2021-11-17 8:48 UTC (permalink / raw) To: Wen Gong; +Cc: ath11k, linux-wireless, quic_wgong Wen Gong <quic_wgong@quicinc.com> wrote: > ath11k_qmi_free_target_mem_chunk() and ath11k_qmi_m3_free() is static > in qmi.c, they are needed for recovery, export them in a new function. > > Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 > > Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Wen mentioned me privately that some extra features are needed to get this working, so dropping the patchset. 4 patches set to Changes Requested. 12621327 [v4,1/4] ath11k: add ath11k_qmi_free_resource() for recovery 12621331 [v4,2/4] ath11k: fix invalid m3 buffer address 12621329 [v4,3/4] ath11k: add support for device recovery for QCA6390 12621333 [v4,4/4] ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base -- https://patchwork.kernel.org/project/linux-wireless/patch/20211116041522.23529-2-quic_wgong@quicinc.com/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v4 2/4] ath11k: fix invalid m3 buffer address 2021-11-16 4:15 [PATCH v4 0/4] ath11k: add feature for device recovery Wen Gong 2021-11-16 4:15 ` [PATCH v4 1/4] ath11k: add ath11k_qmi_free_resource() for recovery Wen Gong @ 2021-11-16 4:15 ` Wen Gong 2021-11-16 4:15 ` [PATCH v4 3/4] ath11k: add support for device recovery for QCA6390 Wen Gong 2021-11-16 4:15 ` [PATCH v4 4/4] ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base Wen Gong 3 siblings, 0 replies; 10+ messages in thread From: Wen Gong @ 2021-11-16 4:15 UTC (permalink / raw) To: ath11k; +Cc: linux-wireless, quic_wgong From: Carl Huang <quic_cjhuang@quicinc.com> This is to fix m3 buffer reuse issue as m3_mem->size isn't set to ZERO in free function, which leads invalid m3 downloading to firmware and firmware crashed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> --- drivers/net/wireless/ath/ath11k/qmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c index 1f474a10d1b0..2efc07f175c9 100644 --- a/drivers/net/wireless/ath/ath11k/qmi.c +++ b/drivers/net/wireless/ath/ath11k/qmi.c @@ -2184,6 +2184,7 @@ static void ath11k_qmi_m3_free(struct ath11k_base *ab) dma_free_coherent(ab->dev, m3_mem->size, m3_mem->vaddr, m3_mem->paddr); m3_mem->vaddr = NULL; + m3_mem->size = 0; } static int ath11k_qmi_wlanfw_m3_info_send(struct ath11k_base *ab) -- 2.31.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v4 3/4] ath11k: add support for device recovery for QCA6390 2021-11-16 4:15 [PATCH v4 0/4] ath11k: add feature for device recovery Wen Gong 2021-11-16 4:15 ` [PATCH v4 1/4] ath11k: add ath11k_qmi_free_resource() for recovery Wen Gong 2021-11-16 4:15 ` [PATCH v4 2/4] ath11k: fix invalid m3 buffer address Wen Gong @ 2021-11-16 4:15 ` Wen Gong 2021-11-16 8:15 ` Sven Eckelmann 2021-11-16 4:15 ` [PATCH v4 4/4] ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base Wen Gong 3 siblings, 1 reply; 10+ messages in thread From: Wen Gong @ 2021-11-16 4:15 UTC (permalink / raw) To: ath11k; +Cc: linux-wireless, quic_wgong Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> --- drivers/net/wireless/ath/ath11k/core.c | 67 ++++++++++++++++++++++++++ drivers/net/wireless/ath/ath11k/core.h | 13 +++++ drivers/net/wireless/ath/ath11k/mac.c | 18 +++++++ drivers/net/wireless/ath/ath11k/mhi.c | 33 +++++++++++++ drivers/net/wireless/ath/ath11k/pci.c | 3 ++ 5 files changed, 134 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 969bf1a590d9..be788ec08200 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -1043,6 +1043,65 @@ static void ath11k_core_restart(struct work_struct *work) complete(&ab->driver_recovery); } +static void ath11k_core_reset(struct work_struct *work) +{ + struct ath11k_base *ab = container_of(work, struct ath11k_base, reset_work); + int reset_count, fail_cont_count; + long time_left; + + if (!(test_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags))) { + ath11k_warn(ab, "ignore reset dev flags 0x%lx\n", ab->dev_flags); + return; + } + + /* Sometimes the recovery will fail and then the next all recovery fail, + * this is to avoid infinite recovery since it can not recovery success. + */ + fail_cont_count = atomic_read(&ab->fail_cont_count); + + if (fail_cont_count >= ATH11K_RESET_MAX_FAIL_COUNT_FINAL) + return; + + if (fail_cont_count >= ATH11K_RESET_MAX_FAIL_COUNT_FIRST && + time_before(jiffies, ab->reset_fail_timeout)) + return; + + reset_count = atomic_inc_return(&ab->reset_count); + + if (reset_count > 1) { + /* Sometimes it happened another reset worker before the previous one + * completed, then the second reset worker will destroy the previous one, + * thus below is to avoid that. + */ + ath11k_warn(ab, "already reseting count %d\n", reset_count); + + reinit_completion(&ab->reset_complete); + time_left = wait_for_completion_timeout(&ab->reset_complete, + ATH11K_RESET_TIMEOUT_HZ); + + if (time_left) { + ath11k_dbg(ab, ATH11K_DBG_BOOT, "to skip reset\n"); + atomic_dec(&ab->reset_count); + return; + } + + ab->reset_fail_timeout = jiffies + ATH11K_RESET_FAIL_TIMEOUT_HZ; + /* Record the continuous recovery fail count when recovery failed*/ + fail_cont_count = atomic_inc_return(&ab->fail_cont_count); + } + + ath11k_dbg(ab, ATH11K_DBG_BOOT, "reset starting\n"); + + ab->is_reset = true; + atomic_set(&ab->recovery_count, 0); + + ath11k_hif_power_down(ab); + ath11k_qmi_free_resource(ab); + ath11k_hif_power_up(ab); + + ath11k_dbg(ab, ATH11K_DBG_BOOT, "reset started\n"); +} + static int ath11k_init_hw_params(struct ath11k_base *ab) { const struct ath11k_hw_params *hw_params = NULL; @@ -1132,14 +1191,20 @@ struct ath11k_base *ath11k_core_alloc(struct device *dev, size_t priv_size, if (!ab->workqueue) goto err_sc_free; + ab->workqueue_aux = create_singlethread_workqueue("ath11k_aux_wq"); + if (!ab->workqueue_aux) + goto err_free_wq; + mutex_init(&ab->core_lock); spin_lock_init(&ab->base_lock); + init_completion(&ab->reset_complete); INIT_LIST_HEAD(&ab->peers); init_waitqueue_head(&ab->peer_mapping_wq); init_waitqueue_head(&ab->wmi_ab.tx_credits_wq); init_waitqueue_head(&ab->qmi.cold_boot_waitq); INIT_WORK(&ab->restart_work, ath11k_core_restart); + INIT_WORK(&ab->reset_work, ath11k_core_reset); timer_setup(&ab->rx_replenish_retry, ath11k_ce_rx_replenish_retry, 0); init_completion(&ab->htc_suspend); init_completion(&ab->wow.wakeup_completed); @@ -1150,6 +1215,8 @@ struct ath11k_base *ath11k_core_alloc(struct device *dev, size_t priv_size, return ab; +err_free_wq: + destroy_workqueue(ab->workqueue); err_sc_free: kfree(ab); return NULL; diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index 018fb2385f2a..9a9f8f24d407 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -39,6 +39,10 @@ extern unsigned int ath11k_frame_mode; #define ATH11K_MON_TIMER_INTERVAL 10 +#define ATH11K_RESET_TIMEOUT_HZ (20 * HZ) +#define ATH11K_RESET_MAX_FAIL_COUNT_FIRST 3 +#define ATH11K_RESET_MAX_FAIL_COUNT_FINAL 5 +#define ATH11K_RESET_FAIL_TIMEOUT_HZ (20 * HZ) enum ath11k_supported_bw { ATH11K_BW_20 = 0, @@ -734,6 +738,15 @@ struct ath11k_base { struct completion driver_recovery; struct workqueue_struct *workqueue; struct work_struct restart_work; + struct workqueue_struct *workqueue_aux; + struct work_struct reset_work; + atomic_t reset_count; + atomic_t recovery_count; + bool is_reset; + struct completion reset_complete; + /* continuous recovery fail count */ + atomic_t fail_cont_count; + unsigned long reset_fail_timeout; struct { /* protected by data_lock */ u32 fw_crash_counter; diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index eb52332dbe3f..b0a2f257f328 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -6032,6 +6032,8 @@ ath11k_mac_op_reconfig_complete(struct ieee80211_hw *hw, enum ieee80211_reconfig_type reconfig_type) { struct ath11k *ar = hw->priv; + struct ath11k_base *ab = ar->ab; + int recovery_count; if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART) return; @@ -6043,6 +6045,22 @@ ath11k_mac_op_reconfig_complete(struct ieee80211_hw *hw, ar->pdev->pdev_id); ar->state = ATH11K_STATE_ON; ieee80211_wake_queues(ar->hw); + + if (ab->is_reset) { + recovery_count = atomic_inc_return(&ab->recovery_count); + ath11k_dbg(ab, ATH11K_DBG_BOOT, + "recovery count %d\n", recovery_count); + /* When there are multiple radios in an SOC, + * the recovery has to be done for each radio + */ + if (recovery_count == ab->num_radios) { + atomic_dec(&ab->reset_count); + complete(&ab->reset_complete); + ab->is_reset = false; + atomic_set(&ab->fail_cont_count, 0); + ath11k_dbg(ab, ATH11K_DBG_BOOT, "reset success\n"); + } + } } mutex_unlock(&ar->conf_mutex); diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c index 75cc2d80fde8..aea21ea2ca47 100644 --- a/drivers/net/wireless/ath/ath11k/mhi.c +++ b/drivers/net/wireless/ath/ath11k/mhi.c @@ -281,15 +281,48 @@ static void ath11k_mhi_op_runtime_put(struct mhi_controller *mhi_cntrl) { } +static char *ath11k_mhi_op_callback_to_str(enum mhi_callback reason) +{ + switch (reason) { + case MHI_CB_IDLE: + return "MHI_CB_IDLE"; + case MHI_CB_PENDING_DATA: + return "MHI_CB_PENDING_DATA"; + case MHI_CB_LPM_ENTER: + return "MHI_CB_LPM_ENTER"; + case MHI_CB_LPM_EXIT: + return "MHI_CB_LPM_EXIT"; + case MHI_CB_EE_RDDM: + return "MHI_CB_EE_RDDM"; + case MHI_CB_EE_MISSION_MODE: + return "MHI_CB_EE_MISSION_MODE"; + case MHI_CB_SYS_ERROR: + return "MHI_CB_SYS_ERROR"; + case MHI_CB_FATAL_ERROR: + return "MHI_CB_FATAL_ERROR"; + case MHI_CB_BW_REQ: + return "MHI_CB_BW_REQ"; + default: + return "UNKNOWN"; + } +}; + static void ath11k_mhi_op_status_cb(struct mhi_controller *mhi_cntrl, enum mhi_callback cb) { struct ath11k_base *ab = dev_get_drvdata(mhi_cntrl->cntrl_dev); + ath11k_dbg(ab, ATH11K_DBG_BOOT, "mhi notify status reason %s\n", + ath11k_mhi_op_callback_to_str(cb)); + switch (cb) { case MHI_CB_SYS_ERROR: ath11k_warn(ab, "firmware crashed: MHI_CB_SYS_ERROR\n"); break; + case MHI_CB_EE_RDDM: + if (!(test_bit(ATH11K_FLAG_UNREGISTERING, &ab->dev_flags))) + queue_work(ab->workqueue_aux, &ab->reset_work); + break; default: break; } diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c index 646ad79f309c..1f8e3837cdfb 100644 --- a/drivers/net/wireless/ath/ath11k/pci.c +++ b/drivers/net/wireless/ath/ath11k/pci.c @@ -1346,6 +1346,7 @@ static void ath11k_pci_remove(struct pci_dev *pdev) set_bit(ATH11K_FLAG_UNREGISTERING, &ab->dev_flags); + cancel_work_sync(&ab->reset_work); ath11k_core_deinit(ab); qmi_fail: @@ -1357,6 +1358,8 @@ static void ath11k_pci_remove(struct pci_dev *pdev) ath11k_hal_srng_deinit(ab); ath11k_ce_free_pipes(ab); + + destroy_workqueue(ab->workqueue_aux); ath11k_core_free(ab); } -- 2.31.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v4 3/4] ath11k: add support for device recovery for QCA6390 2021-11-16 4:15 ` [PATCH v4 3/4] ath11k: add support for device recovery for QCA6390 Wen Gong @ 2021-11-16 8:15 ` Sven Eckelmann 2021-11-17 8:12 ` Kalle Valo 0 siblings, 1 reply; 10+ messages in thread From: Sven Eckelmann @ 2021-11-16 8:15 UTC (permalink / raw) To: ath11k, Wen Gong; +Cc: linux-wireless [-- Attachment #1: Type: text/plain, Size: 6851 bytes --] On Tuesday, 16 November 2021 05:15:21 CET Wen Gong wrote: > Currently ath11k has device recovery logic, it is introduced by this > patch "ath11k: Add support for subsystem recovery" which is upstream > by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. https://www.kernel.org/doc/html/v5.15/process/submitting-patches.html#describe-your-changes Please search for "If you want to refer to a specific commit" And this commit you referenced is definitely not the upstream commit. It was only part of Kalle's repository. The code was only upstreamed with commit d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices"). Btw. another thing which I see again and again in these patches: > --- a/drivers/net/wireless/ath/ath11k/core.h > +++ b/drivers/net/wireless/ath/ath11k/core.h > @@ -39,6 +39,10 @@ [...] > + bool is_reset; https://www.kernel.org/doc/html/v5.15/process/coding-style.html#using-bool "If a structure has many true/false values, consider consolidating them into a bitfield with 1 bit members, or using an appropriate fixed width type, such as u8." There are more verbose mails from Linus Torvalds where he points out the problems of bools in structs. See for example struct ath11k_skb_rxcb. At the moment, it looks like this: struct ath11k_skb_rxcb { dma_addr_t paddr; bool is_first_msdu; bool is_last_msdu; bool is_continuation; bool is_mcbc; bool is_eapol_tkip; struct hal_rx_desc *rx_desc; u8 err_rel_src; u8 err_code; u8 mac_id; u8 unmapped; u8 is_frag; u8 tid; u16 peer_id; u16 seq_no; struct napi_struct *napi; }; Compiled for IPQ60xx, it would end up as: $ pahole ./drivers/net/wireless/ath/ath11k/ath11k.o -C ath11k_skb_rxcb struct ath11k_skb_rxcb { dma_addr_t paddr; /* 0 8 */ bool is_first_msdu; /* 8 1 */ bool is_last_msdu; /* 9 1 */ bool is_continuation; /* 10 1 */ bool is_mcbc; /* 11 1 */ bool is_eapol_tkip; /* 12 1 */ /* XXX 3 bytes hole, try to pack */ struct hal_rx_desc * rx_desc; /* 16 8 */ u8 err_rel_src; /* 24 1 */ u8 err_code; /* 25 1 */ u8 mac_id; /* 26 1 */ u8 unmapped; /* 27 1 */ u8 is_frag; /* 28 1 */ u8 tid; /* 29 1 */ u16 peer_id; /* 30 2 */ u16 seq_no; /* 32 2 */ /* XXX 6 bytes hole, try to pack */ struct napi_struct * napi; /* 40 8 */ /* size: 48, cachelines: 1, members: 16 */ /* sum members: 39, holes: 2, sum holes: 9 */ /* last cacheline: 48 bytes */ }; After changing it to u8 ....:1 and reorganizing the structure: $ pahole drivers/net/wireless/ath/ath11k/ath11k.o -C ath11k_skb_rxcb -R struct ath11k_skb_rxcb { dma_addr_t paddr; /* 0 8 */ struct hal_rx_desc * rx_desc; /* 8 8 */ struct napi_struct * napi; /* 16 8 */ u8 err_rel_src; /* 24 1 */ u8 err_code; /* 25 1 */ u8 mac_id; /* 26 1 */ u8 unmapped; /* 27 1 */ u8 is_frag; /* 28 1 */ u8 tid; /* 29 1 */ u8 is_first_msdu:1; /* 30: 0 1 */ u8 is_last_msdu:1; /* 30: 1 1 */ u8 is_continuation:1; /* 30: 2 1 */ u8 is_mcbc:1; /* 30: 3 1 */ u8 is_eapol_tkip:1; /* 30: 4 1 */ /* XXX 3 bits hole, try to pack */ /* XXX 1 byte hole, try to pack */ u16 peer_id; /* 32 2 */ u16 seq_no; /* 34 2 */ /* size: 40, cachelines: 1, members: 16 */ /* sum members: 34, holes: 1, sum holes: 1 */ /* sum bitfield members: 5 bits, bit holes: 1, sum bit holes: 3 bits */ /* padding: 4 */ /* last cacheline: 40 bytes */ }; Or ath11k_bus_params: $ pahole ./drivers/net/wireless/ath/ath11k/ath11k.o -C ath11k_bus_params struct ath11k_bus_params { bool mhi_support; /* 0 1 */ bool m3_fw_support; /* 1 1 */ bool fixed_bdf_addr; /* 2 1 */ bool fixed_mem_region; /* 3 1 */ bool static_window_map; /* 4 1 */ /* size: 5, cachelines: 1, members: 5 */ /* last cacheline: 5 bytes */ }; After changing it to an "u8 ....:1": $ pahole ./drivers/net/wireless/ath/ath11k/ath11k.o -C ath11k_bus_params struct ath11k_bus_params { u8 mhi_support:1; /* 0: 0 1 */ u8 m3_fw_support:1; /* 0: 1 1 */ u8 fixed_bdf_addr:1; /* 0: 2 1 */ u8 fixed_mem_region:1; /* 0: 3 1 */ u8 static_window_map:1; /* 0: 4 1 */ /* size: 1, cachelines: 1, members: 5 */ /* bit_padding: 3 bits */ /* last cacheline: 1 bytes */ }; There are even better examples. ath11k_hw_params will for example take currently 200 bytes. With a little reordering and adjusting of bools, it can easily be reduced to 152 bytes. But other structures might have more impact because they are used more often. Kind regards, Sven [-- Attachment #2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 3/4] ath11k: add support for device recovery for QCA6390 2021-11-16 8:15 ` Sven Eckelmann @ 2021-11-17 8:12 ` Kalle Valo 2021-11-17 8:46 ` Sven Eckelmann 0 siblings, 1 reply; 10+ messages in thread From: Kalle Valo @ 2021-11-17 8:12 UTC (permalink / raw) To: Sven Eckelmann; +Cc: ath11k, Wen Gong, linux-wireless Sven Eckelmann <sven@narfation.org> writes: > On Tuesday, 16 November 2021 05:15:21 CET Wen Gong wrote: >> Currently ath11k has device recovery logic, it is introduced by this >> patch "ath11k: Add support for subsystem recovery" which is upstream >> by >> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. > > https://www.kernel.org/doc/html/v5.15/process/submitting-patches.html#describe-your-changes > > Please search for "If you want to refer to a specific commit" > And this commit you referenced is definitely not the upstream commit. > It was only part of Kalle's repository. The code was only upstreamed > with commit d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax > devices"). > > > Btw. another thing which I see again and again in these patches: > >> --- a/drivers/net/wireless/ath/ath11k/core.h >> +++ b/drivers/net/wireless/ath/ath11k/core.h >> @@ -39,6 +39,10 @@ > [...] >> + bool is_reset; > > https://www.kernel.org/doc/html/v5.15/process/coding-style.html#using-bool > > "If a structure has many true/false values, consider consolidating them into a > bitfield with 1 bit members, or using an appropriate fixed width type, such as > u8." > > There are more verbose mails from Linus Torvalds where he points out the > problems of bools in structs. See for example struct ath11k_skb_rxcb. At > the moment, it looks like this: > > struct ath11k_skb_rxcb { > dma_addr_t paddr; > bool is_first_msdu; > bool is_last_msdu; > bool is_continuation; > bool is_mcbc; > bool is_eapol_tkip; > struct hal_rx_desc *rx_desc; > u8 err_rel_src; > u8 err_code; > u8 mac_id; > u8 unmapped; > u8 is_frag; > u8 tid; > u16 peer_id; > u16 seq_no; > struct napi_struct *napi; > }; > > Compiled for IPQ60xx, it would end up as: > > $ pahole ./drivers/net/wireless/ath/ath11k/ath11k.o -C ath11k_skb_rxcb > struct ath11k_skb_rxcb { > dma_addr_t paddr; /* 0 8 */ > bool is_first_msdu; /* 8 1 */ > bool is_last_msdu; /* 9 1 */ > bool is_continuation; /* 10 1 */ > bool is_mcbc; /* 11 1 */ > bool is_eapol_tkip; /* 12 1 */ > > /* XXX 3 bytes hole, try to pack */ > > struct hal_rx_desc * rx_desc; /* 16 8 */ > u8 err_rel_src; /* 24 1 */ > u8 err_code; /* 25 1 */ > u8 mac_id; /* 26 1 */ > u8 unmapped; /* 27 1 */ > u8 is_frag; /* 28 1 */ > u8 tid; /* 29 1 */ > u16 peer_id; /* 30 2 */ > u16 seq_no; /* 32 2 */ > > /* XXX 6 bytes hole, try to pack */ > > struct napi_struct * napi; /* 40 8 */ > > /* size: 48, cachelines: 1, members: 16 */ > /* sum members: 39, holes: 2, sum holes: 9 */ > /* last cacheline: 48 bytes */ > }; > > After changing it to u8 ....:1 and reorganizing the structure: > > $ pahole drivers/net/wireless/ath/ath11k/ath11k.o -C ath11k_skb_rxcb -R > struct ath11k_skb_rxcb { > dma_addr_t paddr; /* 0 8 */ > struct hal_rx_desc * rx_desc; /* 8 8 */ > struct napi_struct * napi; /* 16 8 */ > u8 err_rel_src; /* 24 1 */ > u8 err_code; /* 25 1 */ > u8 mac_id; /* 26 1 */ > u8 unmapped; /* 27 1 */ > u8 is_frag; /* 28 1 */ > u8 tid; /* 29 1 */ > u8 is_first_msdu:1; /* 30: 0 1 */ > u8 is_last_msdu:1; /* 30: 1 1 */ > u8 is_continuation:1; /* 30: 2 1 */ > u8 is_mcbc:1; /* 30: 3 1 */ > u8 is_eapol_tkip:1; /* 30: 4 1 */ > > /* XXX 3 bits hole, try to pack */ > /* XXX 1 byte hole, try to pack */ > > u16 peer_id; /* 32 2 */ > u16 seq_no; /* 34 2 */ > > /* size: 40, cachelines: 1, members: 16 */ > /* sum members: 34, holes: 1, sum holes: 1 */ > /* sum bitfield members: 5 bits, bit holes: 1, sum bit holes: 3 bits */ > /* padding: 4 */ > /* last cacheline: 40 bytes */ > }; > > > > Or ath11k_bus_params: > > $ pahole ./drivers/net/wireless/ath/ath11k/ath11k.o -C ath11k_bus_params > struct ath11k_bus_params { > bool mhi_support; /* 0 1 */ > bool m3_fw_support; /* 1 1 */ > bool fixed_bdf_addr; /* 2 1 */ > bool fixed_mem_region; /* 3 1 */ > bool static_window_map; /* 4 1 */ > > /* size: 5, cachelines: 1, members: 5 */ > /* last cacheline: 5 bytes */ > }; > > After changing it to an "u8 ....:1": > > $ pahole ./drivers/net/wireless/ath/ath11k/ath11k.o -C ath11k_bus_params > struct ath11k_bus_params { > u8 mhi_support:1; /* 0: 0 1 */ > u8 m3_fw_support:1; /* 0: 1 1 */ > u8 fixed_bdf_addr:1; /* 0: 2 1 */ > u8 fixed_mem_region:1; /* 0: 3 1 */ > u8 static_window_map:1; /* 0: 4 1 */ > > /* size: 1, cachelines: 1, members: 5 */ > /* bit_padding: 3 bits */ > /* last cacheline: 1 bytes */ > }; > > > There are even better examples. ath11k_hw_params will for example take > currently 200 bytes. With a little reordering and adjusting of bools, > it can easily be reduced to 152 bytes. But other structures might > have more impact because they are used more often. Yeah, I have been worried about this as well and we should fix this. But instead of u8 I would prefer to use bool like mt76 uses: struct mt76_queue_entry { union { void *buf; struct sk_buff *skb; }; union { struct mt76_txwi_cache *txwi; struct urb *urb; int buf_sz; }; u32 dma_addr[2]; u16 dma_len[2]; u16 wcid; bool skip_buf0:1; bool skip_buf1:1; bool done:1; }; I didn't even know using bool is legal until I saw it in mt76. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v4 3/4] ath11k: add support for device recovery for QCA6390 2021-11-17 8:12 ` Kalle Valo @ 2021-11-17 8:46 ` Sven Eckelmann 2021-11-19 15:17 ` ath11k: using boolean bitfields? Kalle Valo 0 siblings, 1 reply; 10+ messages in thread From: Sven Eckelmann @ 2021-11-17 8:46 UTC (permalink / raw) To: Kalle Valo Cc: ath11k, Wen Gong, linux-wireless, Jason Gunthorpe, Joe Perches, Jonathan Corbet [-- Attachment #1: Type: text/plain, Size: 2165 bytes --] On Wednesday, 17 November 2021 09:12:55 CET Kalle Valo wrote: > > https://www.kernel.org/doc/html/v5.15/process/coding-style.html#using-bool [...] > > Yeah, I have been worried about this as well and we should fix this. But > instead of u8 I would prefer to use bool like mt76 uses: [...] > I didn't even know using bool is legal until I saw it in mt76. Interesting, I was also not aware of it. And it also seems to have some interesting implications when assigning values to it (example 4): #include <stdbool.h> #include <stdint.h> #include <stdio.h> struct test { uint8_t u:1; uint8_t u2:1; bool b:1; bool b2:1; }; int main(void) { struct test x; x.u = false; x.b = false; printf("u %u b %u\n", x.u, x.b); x.u = true; x.b = true; printf("u %u b %u\n", x.u, x.b); x.u = 0; x.b = 0; printf("u %u b %u\n", x.u, x.b); x.u = 8; x.b = 8; printf("u %u b %u\n", x.u, x.b); return 0; } Result: u 0 b 0 u 1 b 1 u 0 b 0 u 0 b 1 The last example is basically the reason we see stuff like boolean_like_value = !!(some_retrieved_value); when using unsigned bitfields instead of bool (bitfields). And the memory layout (on x86-64): $ pahole test.o struct test { uint8_t u:1; /* 0: 0 1 */ uint8_t u2:1; /* 0: 1 1 */ _Bool b:1; /* 0: 2 1 */ _Bool b2:1; /* 0: 3 1 */ /* size: 1, cachelines: 1, members: 4 */ /* bit_padding: 4 bits */ /* last cacheline: 1 bytes */ }; To my surprise, it was already mentioned in one of the discussions [1]. Was there anything in the discussion which I might have missed and is a good reason to not use "bool ...:1" in structs? Kind regards, Sven [1] https://lore.kernel.org/all/CA+55aFwVZk1OfB9T2v014PTAKFhtVan_Zj2dOjnCy3x6E4UJfA@mail.gmail.com/T/#u [-- Attachment #2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* ath11k: using boolean bitfields? 2021-11-17 8:46 ` Sven Eckelmann @ 2021-11-19 15:17 ` Kalle Valo 0 siblings, 0 replies; 10+ messages in thread From: Kalle Valo @ 2021-11-19 15:17 UTC (permalink / raw) To: Sven Eckelmann Cc: ath11k, Wen Gong, linux-wireless, Jason Gunthorpe, Joe Perches, Jonathan Corbet Sven Eckelmann <sven@narfation.org> writes: > On Wednesday, 17 November 2021 09:12:55 CET Kalle Valo wrote: >> > https://www.kernel.org/doc/html/v5.15/process/coding-style.html#using-bool > [...] >> >> Yeah, I have been worried about this as well and we should fix this. But >> instead of u8 I would prefer to use bool like mt76 uses: > [...] >> I didn't even know using bool is legal until I saw it in mt76. > > Interesting, I was also not aware of it. And it also seems to have some > interesting implications when assigning values to it (example 4): > > #include <stdbool.h> > #include <stdint.h> > #include <stdio.h> > > struct test { > uint8_t u:1; > uint8_t u2:1; > bool b:1; > bool b2:1; > }; > > int main(void) > { > struct test x; > > x.u = false; > x.b = false; > printf("u %u b %u\n", x.u, x.b); > > x.u = true; > x.b = true; > printf("u %u b %u\n", x.u, x.b); > > x.u = 0; > x.b = 0; > printf("u %u b %u\n", x.u, x.b); > > x.u = 8; > x.b = 8; > printf("u %u b %u\n", x.u, x.b); > > return 0; > } > > > Result: > > u 0 b 0 > u 1 b 1 > u 0 b 0 > u 0 b 1 > > > The last example is basically the reason we see stuff like > > boolean_like_value = !!(some_retrieved_value); > > when using unsigned bitfields instead of bool (bitfields). > > > And the memory layout (on x86-64): > > $ pahole test.o > struct test { > uint8_t u:1; /* 0: 0 1 */ > uint8_t u2:1; /* 0: 1 1 */ > _Bool b:1; /* 0: 2 1 */ > _Bool b2:1; /* 0: 3 1 */ > > /* size: 1, cachelines: 1, members: 4 */ > /* bit_padding: 4 bits */ > /* last cacheline: 1 bytes */ > }; > > > To my surprise, it was already mentioned in one of the discussions [1]. > Was there anything in the discussion which I might have missed and > is a good reason to not use "bool ...:1" in structs? No responses so must be safe to use ;) Changing the subject to gain more visibility. But IMHO we should just switch using boolean bitfields as I would expect mt76 to have noticed any problems by now. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v4 4/4] ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base 2021-11-16 4:15 [PATCH v4 0/4] ath11k: add feature for device recovery Wen Gong ` (2 preceding siblings ...) 2021-11-16 4:15 ` [PATCH v4 3/4] ath11k: add support for device recovery for QCA6390 Wen Gong @ 2021-11-16 4:15 ` Wen Gong 3 siblings, 0 replies; 10+ messages in thread From: Wen Gong @ 2021-11-16 4:15 UTC (permalink / raw) To: ath11k; +Cc: linux-wireless, quic_wgong ieee80211_reconfig() of mac80211 is the main function for recovery of each ieee80211_hw and ath11k, and ath11k_core_reconfigure_on_crash() is the main function for recovery of ath11k_base, it has more than one ieee80211_hw and ath11k for each ath11k_base, so it need to add synchronization between them, otherwise it has many issue. For example, when ath11k_core_reconfigure_on_crash() is not complete, mac80211 send a hw scan request to ath11k, it leads firmware crash, because firmware has not been initialized at that moment, firmware is only finished downloaded and loaded, it can not receive scan command. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> --- drivers/net/wireless/ath/ath11k/core.c | 52 ++++++++++++++++++++++---- drivers/net/wireless/ath/ath11k/core.h | 5 +++ drivers/net/wireless/ath/ath11k/mac.c | 22 +++++++++++ 3 files changed, 71 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index be788ec08200..0dc489d5c259 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -965,12 +965,11 @@ void ath11k_core_halt(struct ath11k *ar) idr_init(&ar->txmgmt_idr); } -static void ath11k_core_restart(struct work_struct *work) +static void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab) { - struct ath11k_base *ab = container_of(work, struct ath11k_base, restart_work); struct ath11k *ar; struct ath11k_pdev *pdev; - int i, ret = 0; + int i; spin_lock_bh(&ab->base_lock); ab->stats.fw_crash_counter++; @@ -1002,12 +1001,13 @@ static void ath11k_core_restart(struct work_struct *work) wake_up(&ab->wmi_ab.tx_credits_wq); wake_up(&ab->peer_mapping_wq); +} - ret = ath11k_core_reconfigure_on_crash(ab); - if (ret) { - ath11k_err(ab, "failed to reconfigure driver on crash recovery\n"); - return; - } +static void ath11k_core_post_reconfigure_recovery(struct ath11k_base *ab) +{ + struct ath11k *ar; + struct ath11k_pdev *pdev; + int i; for (i = 0; i < ab->num_radios; i++) { pdev = &ab->pdevs[i]; @@ -1043,6 +1043,27 @@ static void ath11k_core_restart(struct work_struct *work) complete(&ab->driver_recovery); } +static void ath11k_core_restart(struct work_struct *work) +{ + struct ath11k_base *ab = container_of(work, struct ath11k_base, restart_work); + int ret; + + if (!ab->is_reset) + ath11k_core_pre_reconfigure_recovery(ab); + + ret = ath11k_core_reconfigure_on_crash(ab); + if (ret) { + ath11k_err(ab, "failed to reconfigure driver on crash recovery\n"); + return; + } + + if (ab->is_reset) + complete_all(&ab->reconfigure_complete); + + if (!ab->is_reset) + ath11k_core_post_reconfigure_recovery(ab); +} + static void ath11k_core_reset(struct work_struct *work) { struct ath11k_base *ab = container_of(work, struct ath11k_base, reset_work); @@ -1095,6 +1116,19 @@ static void ath11k_core_reset(struct work_struct *work) ab->is_reset = true; atomic_set(&ab->recovery_count, 0); + ath11k_core_pre_reconfigure_recovery(ab); + + reinit_completion(&ab->reconfigure_complete); + ath11k_core_post_reconfigure_recovery(ab); + + reinit_completion(&ab->recovery_start); + atomic_set(&ab->recovery_start_count, 0); + + ath11k_dbg(ab, ATH11K_DBG_BOOT, "waiting recovery start...\n"); + + time_left = wait_for_completion_timeout(&ab->recovery_start, + ATH11K_RECOVER_START_TIMEOUT_HZ); + ath11k_hif_power_down(ab); ath11k_qmi_free_resource(ab); ath11k_hif_power_up(ab); @@ -1198,6 +1232,8 @@ struct ath11k_base *ath11k_core_alloc(struct device *dev, size_t priv_size, mutex_init(&ab->core_lock); spin_lock_init(&ab->base_lock); init_completion(&ab->reset_complete); + init_completion(&ab->reconfigure_complete); + init_completion(&ab->recovery_start); INIT_LIST_HEAD(&ab->peers); init_waitqueue_head(&ab->peer_mapping_wq); diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h index 9a9f8f24d407..95b9ebcd0e35 100644 --- a/drivers/net/wireless/ath/ath11k/core.h +++ b/drivers/net/wireless/ath/ath11k/core.h @@ -43,6 +43,8 @@ extern unsigned int ath11k_frame_mode; #define ATH11K_RESET_MAX_FAIL_COUNT_FIRST 3 #define ATH11K_RESET_MAX_FAIL_COUNT_FINAL 5 #define ATH11K_RESET_FAIL_TIMEOUT_HZ (20 * HZ) +#define ATH11K_RECONFIGURE_TIMEOUT_HZ (10 * HZ) +#define ATH11K_RECOVER_START_TIMEOUT_HZ (20 * HZ) enum ath11k_supported_bw { ATH11K_BW_20 = 0, @@ -742,8 +744,11 @@ struct ath11k_base { struct work_struct reset_work; atomic_t reset_count; atomic_t recovery_count; + atomic_t recovery_start_count; bool is_reset; struct completion reset_complete; + struct completion reconfigure_complete; + struct completion recovery_start; /* continuous recovery fail count */ atomic_t fail_cont_count; unsigned long reset_fail_timeout; diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index b0a2f257f328..a680def29bb9 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -4377,6 +4377,27 @@ static int ath11k_mac_config_mon_status_default(struct ath11k *ar, bool enable) return ret; } +static void ath11k_mac_wait_reconfigure(struct ath11k_base *ab) +{ + int recovery_start_count; + + if (!ab->is_reset) + return; + + recovery_start_count = atomic_inc_return(&ab->recovery_start_count); + ath11k_dbg(ab, ATH11K_DBG_MAC, "recovery start count %d\n", recovery_start_count); + + if (recovery_start_count == ab->num_radios) { + complete(&ab->recovery_start); + ath11k_dbg(ab, ATH11K_DBG_MAC, "recovery started success\n"); + } + + ath11k_dbg(ab, ATH11K_DBG_MAC, "waiting reconfigure...\n"); + + wait_for_completion_timeout(&ab->reconfigure_complete, + ATH11K_RECONFIGURE_TIMEOUT_HZ); +} + static int ath11k_mac_op_start(struct ieee80211_hw *hw) { struct ath11k *ar = hw->priv; @@ -4393,6 +4414,7 @@ static int ath11k_mac_op_start(struct ieee80211_hw *hw) break; case ATH11K_STATE_RESTARTING: ar->state = ATH11K_STATE_RESTARTED; + ath11k_mac_wait_reconfigure(ab); break; case ATH11K_STATE_RESTARTED: case ATH11K_STATE_WEDGED: -- 2.31.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-11-19 15:17 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-11-16 4:15 [PATCH v4 0/4] ath11k: add feature for device recovery Wen Gong 2021-11-16 4:15 ` [PATCH v4 1/4] ath11k: add ath11k_qmi_free_resource() for recovery Wen Gong 2021-11-17 8:48 ` Kalle Valo 2021-11-16 4:15 ` [PATCH v4 2/4] ath11k: fix invalid m3 buffer address Wen Gong 2021-11-16 4:15 ` [PATCH v4 3/4] ath11k: add support for device recovery for QCA6390 Wen Gong 2021-11-16 8:15 ` Sven Eckelmann 2021-11-17 8:12 ` Kalle Valo 2021-11-17 8:46 ` Sven Eckelmann 2021-11-19 15:17 ` ath11k: using boolean bitfields? Kalle Valo 2021-11-16 4:15 ` [PATCH v4 4/4] ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base Wen Gong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).