Re: [PATCH] ath10k: Fix survey information reporting

[Kalle Valo <kvalo@qca.qualcomm.com>]

Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> writes:

> Rx clear count reported in wmi_chan_info_event is actually channel_busy_count
> not rx_frame_count. Send rx_clear_count through time_busy of survey_info
> and set SURVEY_INFO_TIME_BUSY in filled.
>
> iw wlan0 survey dump
>
> urvey data from wlan0
>         frequency:                      5180 MHz [in use]
>         noise:                          -103 dBm
>         channel active time:            150 ms
>         channel busy time:              22 ms
> Survey data from wlan0
>         frequency:                      5200 MHz
>         noise:                          -102 dBm
>         channel active time:            146 ms
>         channel busy time:              0 ms
>
> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>

Thanks, applied.

I actually applied this already on the 11th but apparently forgot to
send an email.

-- 
Kalle Valo