From: Kalle Valo <kvalo@kernel.org>
To: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Cc: <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH v2 0/4] ath11k: factory test mode support
Date: Thu, 20 Apr 2023 15:13:09 +0300 [thread overview]
Message-ID: <87r0sevjje.fsf@kernel.org> (raw)
In-Reply-To: <825cf403-b833-beff-02d4-cf8fbab89eb0@quicinc.com> (Raj Kumar Bhagat's message of "Thu, 20 Apr 2023 17:31:25 +0530")
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes:
> On 4/20/2023 5:06 PM, Raj Kumar Bhagat wrote:
>
>> Device is booted in factory test mode to calibrate the board.
>> The commands are sent from a userspace application, which is
>> sent to firmware using wmi commands. Firmware will send the
>> response back to the application which stores the calibration
>> data in caldata.bin file. This file will be loaded when the
>> device boots up normally next time.
>>
>> Govindaraj Saminathan (3):
>> wifi: ath11k: remove unused function ath11k_tm_event_wmi
>> wifi: ath11k: optimize ath11k_tm_cmd_get_version
>> wifi: ath11k: factory test mode support
>>
>> Sowmiya Sree Elavalagan (1):
>> wifi: ath11k: Allow ath11k to boot without caldata in ftm mode
>>
>> ---
>> v2:
>> - added separate patch for removal of ath11k_tm_event_wmi()
>> - added separate patch for changes in ath11k_tm_cmd_get_version()
>> - removed unused cmd and updated documentation for enum ath11k_tm_cmd
>> - changed warning print to debug print
>> ---
>>
>> drivers/net/wireless/ath/ath11k/ahb.c | 3 +-
>> drivers/net/wireless/ath/ath11k/core.c | 20 +-
>> drivers/net/wireless/ath/ath11k/core.h | 15 +-
>> drivers/net/wireless/ath/ath11k/mac.c | 13 +-
>> drivers/net/wireless/ath/ath11k/pci.c | 3 +-
>> drivers/net/wireless/ath/ath11k/qmi.c | 10 +-
>> drivers/net/wireless/ath/ath11k/testmode.c | 320 ++++++++++++++++---
>> drivers/net/wireless/ath/ath11k/testmode.h | 20 +-
>> drivers/net/wireless/ath/ath11k/testmode_i.h | 16 +
>> drivers/net/wireless/ath/ath11k/wmi.c | 40 ++-
>> drivers/net/wireless/ath/ath11k/wmi.h | 20 ++
>> drivers/net/wireless/ath/ath11k/wow.c | 3 +-
>> 12 files changed, 419 insertions(+), 64 deletions(-)
>>
>>
>> base-commit: 12f167f02a1abe2c8817496a902de00758285b92
>
> Please ignore this patch series. Tested-on tag is missing for patches 1/4 and
> 2/4. Will send v3 with correct Tested-on tag.
Please wait, I need to first push back my changes to the pending so that
you can see them.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
prev parent reply other threads:[~2023-04-20 12:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-20 11:36 [PATCH v2 0/4] ath11k: factory test mode support Raj Kumar Bhagat
2023-04-20 11:36 ` [PATCH v2 1/4] wifi: ath11k: remove unused function ath11k_tm_event_wmi Raj Kumar Bhagat
2023-04-20 11:36 ` [PATCH v2 2/4] wifi: ath11k: optimize ath11k_tm_cmd_get_version Raj Kumar Bhagat
2023-04-20 11:36 ` [PATCH v2 3/4] wifi: ath11k: factory test mode support Raj Kumar Bhagat
2023-04-20 11:36 ` [PATCH v2 4/4] wifi: ath11k: Allow ath11k to boot without caldata in ftm mode Raj Kumar Bhagat
2023-04-20 12:01 ` [PATCH v2 0/4] ath11k: factory test mode support Raj Kumar Bhagat
2023-04-20 12:13 ` Kalle Valo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r0sevjje.fsf@kernel.org \
--to=kvalo@kernel.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_rajkbhag@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).